Belt size

[lilmarauder]

Anybody have a belt part number for a 3.0 upper pulley and a 2lb lower? My belt tensioner is now Maxed out and my belt was riding on the edge of my pulley .

I'll post up pics in a little bit

[Vortech347]

Most likely just go .5-1" bigger.

The size of your belt should be printed on it.

[justbob]

Anybody have a belt part number for a 3.0 upper pulley and a 2lb lower? My belt tensioner is now Maxed out and my belt was riding on the edge of my pulley .

I'll post up pics in a little bit

I believe that's the combo Joe is using. Give him a ring.


Self proclaimed Builder Of Badassery.

[lilmarauder]

Joe gave me his belt part number hope that fixes my issue. Could have a alignment issue but the tensioner is dead nuts and it tracks great. I know the belt rode the edge of my pulley cause it wore it shiny

33769

[lilmarauder]

.....I'm such an idiot. That shiny spot on my pulley is from my hood liner. But my tensioner is maxed and my lower hub has a slight wobble. Not front to back but almost like its out of round. Not sure if that could have stretched the belt out, or if it was too loose from the start

[guspech750]

I'm gonna guess too loose. Like my a............. um wait.


Sent from my iPhone 4S

DTR + 4.10's + Eaton swap = Wreeeeeeeeeeeeeeedom