Pics of my car after dyno

[lilmarauder]

Well I picked up the car today and it is an animal..at least to me. Here are a few pics. Car put down 446 rwhp and 467 rwtq. I'm certainly impressed.

Only thing I don't like is that I can't hear the blower. My exhaust is stupid loud bit I still wonder why I can't hear the beloved whine.

Car is beyond dirty in this pic
http://img.tapatalk.com/d/13/04/17/zaju3ave.jpg

http://img.tapatalk.com/d/13/04/17/u2ubydyd.jpg
http://img.tapatalk.com/d/13/04/17/ymepevu9.jpg
http://img.tapatalk.com/d/13/04/17/5apy2ege.jpg

[guspech750]

Awesome man!! Pure awesome!


Sent from my iPhone 4S

DTR + 4.10's + Eaton swap = Wreeeeeeeeeeeeeeedom

[justbob]

Are these ASE numbers? Damn good torque!


Self proclaimed Builder Of Badassery.

[Mebot]

fantastic! keep your car dirty! pure sleeper

sent from space

[ajdereicup]

Looks really good even dirty

[License2Bill]

Sweet! You can change your sig now lol

[lji372]

Thought you were getting it wed? Wth

Congrats:beer:

[BLACKMAGIC03]

Awesome man

[DOOM]

What are the braided hoses connected to?

Looks damn good man! :up:

[sflrainmaker01]

That is awesome!!!!! :burnout:

[71cyclone]

fantastic! keep your car dirty! pure sleeper

sent from space

The New " GATOR " from the movie "White lightning":banana2:

[Mebot]

haha yep Burt Reynolds! :D

sent from space

[MOTOWN]

Lookin good man, great numbers!

[hotford]

What are the braided hoses connected to?

Looks damn good man! :up:
Doom thats his coolant crossover tube...well sort ah.....

[lilmarauder]

Are these ASE numbers? Damn good torque!


Self proclaimed Builder Of Badassery.

Not sure. that's what the dyno sheet he gave me said.

[lilmarauder]

What are the braided hoses connected to?

Looks damn good man! :up:

Yep. The lines go to my thermostat housing.

[guspech750]

What are the braided hoses connected to?

Looks damn good man! :up:

COT delete kit.


Sent from my iPhone 4S

DTR + 4.10's + Eaton swap = Wreeeeeeeeeeeeeeedom

[bugsyc]

Congrats. I got to hand it to you,you gother done...I've followed your progress and you should be proud of yourself...Job well done...:beer:

[lilmarauder]

Thanks. Looking back on it.. it really wasn't that bad. I would do it again

[RacerX]

Very nice! You may want to rotate your CAI plastic shield the opposite side to get less engine heat. :beer:

[lilmarauder]

Thanks. I was messing with it yesterday and rotated it the right way. It just looks soo goofy. I might make one that I like

[lji372]

Thanks. I was messing with it yesterday and rotated it the right way. It just looks soo goofy. I might make one that I like

i'm not far away and have machines at our disposal for making alterations, ha makes it sound like a dress :lol:

[Vortech347]

Looks great. Post a scan of the dynosheet. The cross over delete looks nice.

[seabreeze]

Nice setup!

[lilmarauder]

Haha a dress. Here ya go
http://img.tapatalk.com/d/13/04/27/etytazuj.jpg
http://img.tapatalk.com/d/13/04/27/pupatyja.jpg

[Guittard22]

^^^^^^^^^^
sick man just sick

You got a monster on you'r hands :) dam your car under the hood is crazy good looking going to add it to the screen saver to my labtop. Seeing how fast you did you'r swap makes me want to push getting my parts faster for my build . I kind of hit a road block with putting the rest of the parts needed to complete my list of parts on hold . I am sure a few will ask why !??? Well there is a custom block coming up for sale that I am really thinking of buying - call me crazy but I want my own monster .


Keep up the good work

[WantSCMarauder]

Why not port + polish the blower before install?

[lilmarauder]

^^^^^^^^^^
sick man just sick

You got a monster on you'r hands :) dam your car under the hood is crazy good looking going to add it to the screen saver to my labtop. Seeing how fast you did you'r swap makes me want to push getting my parts faster for my build . I kind of hit a road block with putting the rest of the parts needed to complete my list of parts on hold . I am sure a few will ask why !??? Well there is a custom block coming up for sale that I am really thinking of buying - call me crazy but I want my own monster .


Keep up the good work

Thanks. That's awesome that you like how it looks. I like the way it looks too. A built motor would be nasty. Go for it.

[lilmarauder]

Why not port + polish the blower before install?

Some people like chrome, polished, and bling. I'm just not one of those people. I knew I was gonna be close to my 450 rwhp goal so I didn't bother sending it out to be ported. Turned out I hit my power goals perfectly

[lji372]

Why not port + polish the blower before install?


why not do the internals, ploish the alternator etc. etc. etc.?do all the internals, upgrade the trans, upgrade the rear end, shocks, brakes, etc etc etc.

simple: time, money, or patience any one or in any combination..............:D

[lilmarauder]

Yea I really want to put a forged 5.0 in it and up the power a bit. Build the trans as well. I am hungry for more. I want 550-600 to the wheels

[RacerX]

You want to see what a ported blower does? Ported heads also. She's @ about 480rwhp now btw. ;)

http://www.mercurymarauder.net/gallery/data/628/DYNO_460.jpg

[jwibbity]

how did you get that much torque???? what other mods do you have????

[lji372]

You want to see what a ported blower does? Ported heads also. She's @ about 480rwhp now btw. ;)

http://www.mercurymarauder.net/gallery/data/628/DYNO_460.jpg

That's a nice looking dyno sheet :D

Ditto on what mods?

[lilmarauder]

I'm not denying that a ported blower would get me more.

I have no idea how the car made that much torque. The only other thing I did besides the blower is the stainless works headers and exhaust

[RacerX]

CAI, ba2800, BBK twin 65mm, ported Eaton elbow (both sides), ported Eaton, Ported heads, short turn radius, bowl work, polished combustion chambers with valve deshrouding, 98 cobra cams (not degreed), MMR/FRPP block w/forged internals (flat top pistons), FRPP shorty headers, cobra exhaust w/high flow cats, x-pipe, to magnaflow mufflers. (3.65 upper pulley and 6lb lower for 14psi)
Oh and my very own custom tune.

[lji372]

CAI, ba2800, BBK twin 65mm, ported Eaton elbow (both sides), ported Eaton, Ported heads, short turn radius, bowl work, polished combustion chambers with valve deshrouding, 98 cobra cams (not degreed), MMR/FRPP block w/forged internals (flat top pistons), FRPP shorty headers, cobra exhaust w/high flow cats, x-pipe, to magnaflow mufflers. (3.65 upper pulley and 6lb lower for 14psi)
Oh and my very own custom tune.

Awesome stuff!!! I read your port thread this morning. Nice work, I know you heard it a thousand times but it doesn't get old hearing it again does it :D

[Vortech347]

Great Job. Your Torque shelf is awesome.