Boost???

[silversnake]

What's the max lb of boost can I run on a daily driven marauder with a eaton swap?

[guspech750]

Mine is 10-11lbs of boost. I wouldn't do any more than that.

Which seems to be good for 400-440 rwhp on average.

Sent from my iPhone 4S

DTR + 4.10's + Eaton swap = Wreeeeeeeeeeeeeeedom

[justbob]

Enough to bury a 20# gauge! Oh wait, you meant an original block didn't you? :D

Stay 13 or under. Not so much boost, or HP, but more so a safe AFR and lower timing.


Self proclaimed Builder Of Badassery.

[lilmarauder]

Mine will hit 13 and back off to 11. But my timing was backed off a couple degrees. And always keep a close eye on that air fuel gauge.

[guspech750]

http://img.tapatalk.com/d/13/04/21/egupavu4.jpg


Sent from my iPhone 4S

DTR + 4.10's + Eaton swap = Wreeeeeeeeeeeeeeedom

[Vortech347]

Boost isn't really the factor. Anything over about 440rwhp on a stock Marauder shortblock and auto trans is moving the "risk" substantially up. Even with a perfect tune you'll start bending/breaking rods.

[silversnake]

Boost isn't really the factor. Anything over about 440rwhp on a stock Marauder shortblock and auto trans is moving the "risk" substantially up. Even with a perfect tune you'll start bending/breaking rods.

Understood..... I intend on doin the whole forged rotating assembly in the near future. I'd be more than happy with 440rwh😈


Bęãšt Mødë [ON] OFF

[SC Cheesehead]

Mine is 10-11lbs of boost. I wouldn't do any more than that.

Which seems to be good for 400-440 rwhp on average.

Sent from my iPhone 4S

DTR + 4.10's + Eaton swap = Wreeeeeeeeeeeeeeedom

What he said.

I'm at 11 lbs, currently at 430 rwhp, but hope to bump that up a bit in the near future.