PDA

View Full Version : Numbers on the Drivers Door.............


8UWITH6
04-23-2013, 07:04 PM
Did I get your attention? Good! What are these called? Keyless entry? Code Entry? Secret Squirrel Entry?

All jokes aside I searched for about an hour and couldnt find crap about it. My car didnt have its code in the glove box/owners manual. I read somewhere the PCM has the code on it? Help me out would like to know how to find factory code........... from there I will read the manual on how to program my own code. Thanks fellas.
maineiac
04-23-2013, 07:09 PM
You can find it on your trunk arm on the passenger side,Small white sticker , also inside the door, drivers side.
JBFTech
04-23-2013, 07:12 PM
Keyless entry code? It should be on a tag on the trunk hinge, passenger side I believe.....if it's still there :dunno:
lji372
04-23-2013, 07:13 PM
You can find it on your trunk arm on the passenger side,Small white sticker , also inside the door drivers side.

what he^^^^^said if someone put the stickers there. mine are still in my owners manual. although i can never remember them. i gave up trying. for some reason i keep pushing the 8 :D

i also read they are behind the drivers door panel too
L.Mark
04-23-2013, 07:43 PM
I have a white sticker on the drivers door jam with some numbers on it, but they ar not the keyless coed. I tried several times to no avail...
8UWITH6
04-23-2013, 08:05 PM
Nothing on the trunk hinge. Checking door area.
8UWITH6
04-23-2013, 08:08 PM
and nothing on the door.
RubberCtyRauder
04-23-2013, 08:20 PM
The sticker on the door jam up near the hinges is the code for the pcm..like I believe all 2004 are MAV4. If you pull the door panel off. the factory code should be inside on the module.
8UWITH6
04-23-2013, 08:30 PM
Just had the door panels off for speakers last month. DOH!
TORINO
04-23-2013, 10:09 PM
I went to the dealer and the service writer had a scan tool and he got the code and did not charge anything!!!!
L.Mark
04-23-2013, 11:39 PM
^^^I tried this and it was 30minutes and $50...
RF Overlord
04-24-2013, 04:22 AM
What are these called? Keyless entry?
Correct.
I read somewhere the PCM has the code on it? The code is not on the PCM, it's on the module in the driver's door. Once you've confirmed that it works, follow the procedure for erasing any user-installed codes (no, it won't erase the factory code), then you can programme your own. I think it will hold up to 5 additional codes.