Big plans!

[failsatheals]

Hi all! Ive been toying around for the last few months what I want to drop a 4.6l in. I picked this up a few months ago on ebay:

http://i.imgur.com/uSNeijc.jpg

Now I just need to find a marauder to drop it in!

Is there any guides or tips for dropping a complete terminator in? I found some guides on an eaton swap, but Ive never personally seen under a marauder.

If anyone has tips id love to hear them!:beer:

[lji372]

:welcome1:to the modness!!!

:woohoo: looks like your opening a can of headaches:lol:

way to start:beer:

[Curless]

http://www.mercurymarauder.net/forums/showthread.php?t=87104

Just sayin....

[failsatheals]

Lol, Im still waiting for my M3 to sell. I have been keeping an eye on that one, one in florida and those 2 in hawaii :p

[SC Cheesehead]

Hi all! Ive been toying around for the last few months what I want to drop a 4.6l in. I picked this up a few months ago on ebay:

http://i.imgur.com/uSNeijc.jpg

Now I just need to find a marauder to drop it in!

Is there any guides or tips for dropping a complete terminator in? I found some guides on an eaton swap, but Ive never personally seen under a marauder.

If anyone has tips id love to hear them!:beer:
The Cobra front skirt uses a different accessory mounting configuration than a Marauder, so a direct bolt-in will require notching the frame.

Better to go with the OEM Marauder cover and buy custom brackets for mounting the alternator and blower belt tensioner (MM.net member gortch makes the brackets) to save you the work of notching. This will also require going with a Metco or LFP lower mounting hub to get the correct pulley alignment.

Also, the Teminator runs a lower compression, so you can prolly crank up the boost a bit through a larger lower/smaller upper pulley combination.

[guspech750]

Like Cheesehead said. Use the Marauder front cover and the brackets along with the Metco lower hub and pulley. Will make life quite a bit easier.

http://img.tapatalk.com/d/13/05/15/4y8e8yga.jpg
http://img.tapatalk.com/d/13/05/15/py3e7yry.jpg

Also, isn't the oil pan and pickup tube different on the Cobra vs the Marauder pan and tube? Those have to be switched too correct???


Sent from my iPhone 4S

DTR + 4.10's + Eaton swap = Wreeeeeeeeeeeeeeedom

[justbob]

Buy an Aviator! That's where I'd like to shove my Trilogy someday when I upgrade..


Self proclaimed Builder Of Badassery.

[Guittard22]

OOOOOOOOOOOOOOO man that baby going to be sick what you end up paying for that baby ? welcome to the site looks like your making a monster

[sailsmen]

Oil pan, p/u tube and flex plate.