Clocksprings

[fastblackmerc]

Just a quick question.....

There has been some talk about replacing the clockspring to fix broken cruise control, air bag problems, etc.

Has anyone ever replaced the clockspring and that fixed the problem?

I've worked on cars and trucks for over 30 years (10 years professionaly) and had never had to replace a clockspring.

[03mmmonroe]

Just a quick question.....

There has been some talk about replacing the clockspring to fix broken cruise control, air bag problems, etc.

Has anyone ever replaced the clockspring and that fixed the problem?

I've worked on cars and trucks for over 30 years (10 years professionaly) and had never had to replace a clockspring.

Hello Jim, I have replace two clock springs to repair switch function. Last one was my 2009 F150. BUT not on my MM.

[BAD MERC]

I had to take the one in my 2006 Taurus apart because the ribbon inside was clicking against the plastic housing and was annoying when I turned the wheel. I coated the inside with silicone grease. Easy to replace if you know your tools and procedures.

[SGT_MERC]

I had to replace mine in the Marauder last summer. Fixed the problem.

[justbob]

Still haven't tested mine. Too busy.. But a definite yes in several F150's.


Self proclaimed Builder Of Badassery.

Buy it, Break it, Build it BETTER.
"Since 2004"

[RR|Suki]

I've had two go bad on my car almost back to back, maybe there was a bad batch. For me I lost all wheel controls, no horn, and airbag light flash. Easy to change and cost me $45 online or something and all has been well for the past 5-6 years

[Shaijack]

Does this also control the horn? I have one of my Marauders that the horn does not blow.

[Haggis]

Does this also control the horn? I have one of my Marauders that the horn does not blow.

But, the driver does.....:lol:


Sorry Jim, could not resist.

[fastblackmerc]

Does this also control the horn? I have one of my Marauders that the horn does not blow.

Yes it does, but there are many things to check before replacing the clockspring.

[Curless]

We've done so many Chrysler products that I could not even begin to count them...not as many Fords but we have done them

[johnnyrauder]

i had one done on my wifes 03 vic when she had no stering wheel controls dealer wanted $750.00 got it done by my reg. guy for $400 it is all labor the part was like $50..

[Granddaddy Marq]

Ok here we go; What's a clockspring? Were is it located? What does it do? And how do you replace it? Sounds like something I'm going to have to deal with someday.

[fastblackmerc]

Ok here we go; What's a clockspring? Were is it located? What does it do? And how do you replace it? Sounds like something I'm going to have to deal with someday.

Google is your friend......

It maintanes contact to the various circuits as the steering wheel turns.

[Granddaddy Marq]

Google is your friend......

It maintanes contact to the various circuits as the steering wheel turns.



OH NO IT'S NOT! With friends like that who needs enemies. Just this morning it tried to auto install Google Chrome as my web browser/ home page. Had to do a restore to dump it. Google hates me.:lol:

Thanks for the filling me in on the spring. Sounds like steering column dissassembly to me.

[fastblackmerc]

OH NO IT'S NOT! With friends like that who needs enemies. Just this morning it tried to auto install Google Chrome as my web browser/ home page. Had to do a restore to dump it. Google hates me.:lol:

Thanks for the filling me in on the spring. Sounds like steering column dissassembly to me.

Why would you install Google Chrome?

Use Mozilla Firefox.
http://www.mozilla.org/en-US/firefox/new/

Use google as your search engine.

http://en.wikipedia.org/wiki/Clockspring

[Granddaddy Marq]

That's just it. I left work yesterday I didn't have it. This morning I had it. It's a government conspiracy or something. It's out to get me.

[Steve]

I think I'm going to have to replace mine in the near future, no cruise control and the horn went crazy and wouldn't stop blowing a few weeks ago.

[Krytin]

I'm getting an intermittent code 19 on the airbag light and it looks like it's coming down to the clock spring.
Anyone have a source for this part?
I found only one place so far - fordparts.com and they want $145!

[Shaijack]

Will it make the clock run slow or fast?

[fastblackmerc]

Will it make the clock run slow or fast?

Depends on if you wind it clockwise or counterclockwise.

[Bruce Wayne]

Does anyone know the Ford part # for this clockspring, my horn quit working, the same time as the cruise control quit, hmmm, How do I keep from setting off the airbag when I go to fix it? Do I need any special tools, Thanks for the advise

[justbob]

Does anyone know the Ford part # for this clockspring, my horn quit working, the same time as the cruise control quit, hmmm, How do I keep from setting off the airbag when I go to fix it? Do I need any special tools, Thanks for the advise

Here's the one I bought.
http://item.mobileweb.ebay.com/viewitem?itemId=321142618775

No special tools.


Self proclaimed Builder Of Badassery.

Buy it, Break it, Build it BETTER.
"Since 2004"

[guspech750]

Here's the one I bought.
http://item.mobileweb.ebay.com/viewitem?itemId=321142618775

No special tools.


Self proclaimed Builder Of Badassery.

Buy it, Break it, Build it BETTER.
"Since 2004"

Good to know bubs.

Saved in "my eBay" for future purchase if needed.


Sent from The White House on taxpayers dimes.

DTR + 4.10's + Eaton swap = Wreeeeeeeeeeeeeeedom

[Krytin]

OK!
Fixed the code 19 on the airbag system w/the new clockspring!!
Didn't see any obvious problem w/the old one and all of the connectors were firmly plugged in but the light is out and has not been on again for a week!

Ford PN 1W1Z-14A664-AA