Transmission problem solved?

[mcb26]

After struggling for several years with a transmission that would hang in gear. I kept saying it acted like the transmission though the throttle was wide open when it wasn't
The only way to fix it was shut down and restart. Spent a lot of time and money. Posted hear as well as other sites, no luck.
I've run about a month without it happening now. Replaced the throttle position sensor, all the so called experts said that couldn't be it.

[RacerX]

That doesn't make sense. There's no relation. I think it's coincidence. Usually a problem like that would most likely be due to a clogged/bad solenoid. EPC or dual pack Solenoids. Could have cleared itself. At least it works! :beer:

[SC Cheesehead]

That doesn't make sense. There's no relation. I think it's coincidence. Usually a problem like that would most likely be due to a clogged/bad solenoid. EPC or dual pack Solenoids. Could have cleared itself. At least it works! :beer:

^^^^^^ What he said.

[mcb26]

That doesn't make sense. There's no relation. I think it's coincidence. Usually a problem like that would most likely be due to a clogged/bad solenoid. EPC or dual pack Solenoids. Could have cleared itself. At least it works! :beer:

All of the above was done no difference. Also changed the tune and replaced some springs

[babbage]

if TPS was reading 100 percent, (and MM wasn't floored) the PCM is supposed to run in "preprogrammed mode" which could explain why the trans was waiting to hit a certain speed or RPM before shifting.