03 Mach 1 470 RWHP [Archive] - MercuryMarauder.net Forums

Dennis Reinhart

03-19-2004, 07:45 PM

Here is the updae on the Marauder last week it made 510 RWHP and at 12 PSI the six rib was slipping, darn the bad luck, I am no converting that to a 8 rib setup. So I also took a 03 Mach 1 down there to so we strapped down the Mach 1 the first pull it made 436 and spiked lean at 5k, so this car has the 03 Cobra tank and twin pumps I could not see what was wrong but as always Jerry was right it was a bad pump. Today I finished it here on my Dyno.
The car is brand new I installed a Vortech S trim with after cooler with an AFPP Cobra tank and pumps.

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1079746978-fullview.jpg.jpg

Here is a shot of the engine compartment.

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1079750615-frontengmach1.jpg

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1079747866-engsideview.jpg.jpg

This car has a Mach 1000 stereo I did not want to butcher the trunk for the battery relocation kit. So I installed the coolant reservoir in the left front fender well.
http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1079748182-mach1res.jpg.jpg
With the inner fender well liner in place it cannot be seen at all.
Now after changing the Twin Cobra pump assembly out, we strapped the car on the Dyno. For our first pull to 5k to make sure we had enough fuel on the second pull the car made. 455.6 RWHP and 408.9RWTQ with an 11.0/11.5 AF, I feel this is a bit much so I pulled three degrees of timing and the next pull it made 465.4 RWHP and 441.4 RWTQ. So I pulled three degrees more, and the car made a finale number of 471 RWHP and 411 RWTQ with a total of 14 degrees timing this is as much as I have seen on a stock motor, the car has LTH and X pipe. http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1079748870-mach1lthxpipe.jpg.JPG
Tomorrow I am going to add 5% to 8% more fuel putting the AF in low 11's Hopefully bringing the RWHP closer to reality.
http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1079749009-mach457rwhp.jpg

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1079749070-mach470rwhp.jpg

sailsmen

03-19-2004, 09:21 PM

Wow !:banana2:

It looks like the one that was in your shop when I visited. You should give Mustangs and Fast Fords a call!

Next to the MM Mach 1 are my favorite, a lot of car for the dollar.

Nice dyno numbers :rock: .

I am curious do you know why the Torque and Power don't cross at 4252 RPM on the dyno graph?

WhoMe

03-20-2004, 09:58 AM

Wow !:banana2:
I am curious do you know why the Torque and Power don't cross at 4252 RPM on the dyno graph?

Look closer. They are on different scales, HP left and torque right.

sailsmen

03-20-2004, 12:07 PM

Thanks, now I understand.

stumpy

03-20-2004, 06:13 PM

Dennis Reinhart

03-21-2004, 07:43 AM

Lonnie did most of the work on this car it came out great

LincMercLover

04-19-2004, 01:52 PM

Sweet... :up:

You GOTTA make that shaker functional though! That's what the Mach's all about!

Dennis Reinhart

04-19-2004, 04:03 PM

Well I got home last night at 12:30 we had a blast at Fun Ford The mach 1 ran 11.4 at 120 MPH I will post pics ogf the Marauder and time slips later tonight.

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1082415651-03mach1.jpg

MarauderMark

04-19-2004, 05:24 PM

This look like something for Hot Rod mag.The dr. does it again :up:

Dennis Reinhart

04-21-2004, 07:42 AM

Here I am in the Monster I will post the time slip later today.

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1082504813-04marauder.jpg

merc406

04-21-2004, 07:47 AM

Damn, love that picture, put it on my wallpaper. :banana2:

martyo

04-21-2004, 07:50 AM

Cool Dennis. Very cool. We will all be looking forward to seeing the Monster in Indy!!

merc406

04-21-2004, 02:19 PM

Ok, so I'm looking at this picture of the Marauder, on my wallpapered screen, either the left front tire is off the ground or it is really close, I can't tell for sure. :rock: :burnout:

woaface

04-21-2004, 02:38 PM

I too have this picture on my background. I'll post it soon for ya Dennis.
I have the stang, the engine bay taking up roughly 1/4 of the bottom left corner, and the below banner taking coming from the right connecting to the engine bay picture covering up the clock time from the camera.

http://www.marauder57.com/Reinhart/Rsg%20Banner.jpg

Hey just saw the marauder too...can't wait to say "Holy *****!" at the time-slip:beer:

merc406

04-21-2004, 02:39 PM

Dennis, do you have any flow charts on the M/M head?

woaface

04-24-2004, 08:16 AM

Soooooo where's that timeslip???

woaface

04-24-2004, 08:29 AM

Soooooo where's that timeslip???