PDA

View Full Version : Tail shaft housing length


Blk04MM
07-09-2013, 07:51 AM
Fund two with same housings with the same casting number as mine and are two different lengths.

Which is the correct length for the 75w in our cars and is there a speedo plug or is it blocked?
RubberCtyRauder
07-09-2013, 08:10 AM
The longer one should be the correct one, marauders use the aluminum driveshaft which is shorter, so need longer tailshaft. Unsure of speedo question..although there probably is a sensor that goes to PCM
Blk04MM
07-09-2013, 08:50 AM
The longer one should be the correct one, marauders use the aluminum driveshaft which is shorter, so need longer tailshaft. Unsure of speedo question..although there probably is a sensor that goes to PCM

Thank you. If it has speedo we can swap it over. If not can plug it.
gdmjoe
07-09-2013, 09:18 AM
Blk04MM ... is there a speedo plug or is it blocked?

http://www.gdmjoe.com/gothvic/transmission/ehVSSplug.jpg
*Part # F2UZ-7H183-A - Vehicle Speed Sensor Plug

The vehicle speed sensor was removed from the tailshaft housing in 2003.
.
Blk04MM
07-09-2013, 10:22 AM
http://www.gdmjoe.com/gothvic/transmission/ehVSSplug.jpg
*Part # F2UZ-7H183-A - Vehicle Speed Sensor Plug

The vehicle speed sensor was removed from the tailshaft housing in 2003.
.

Ok so that plug can be reused