Need an assist-Alignment

[1Marauder]

I've spent two hours looking through the threads and can't find it.

I took car fixers specs to get my car aligned. 16,OOO miles, new rubber all around.

Alignment guy was cool with the spec, what I wanted to do, etc... But said I needed to order new (camber?) bolts to replace the bolts we would knock the tags off of. His concern was that they'd move without new bolts.

He described them, and I have seen them in previous post, but cannot find them, as bolts with oblong circular metal just below head to help hold the bolt in place after the tag is removed. Much like the square metal tag... Only rounded so you could adjust the amount of metal between the bolt and the " flange" for lack of better term.

Second shop said same thing.

Can someone please forward part, part number, where to buy?

I am ready to start MODDING!!!!

Thanks all!

BTW open to best suggestions of what to do next!

Have new KYB in rear
Rhinehart (sp?) tune
New rubber
JTL air intake
magna flow
Resonator delete

[wannaMM]

I'm about to buy the "Trick" cam bolts that allow an extra bit of adjustment, as my (?crossmember?) has sagged a bit over the lifetime of the car.
I can easily purchase 2 sets as easily as one (Aftermarket Dealer only item) or I can PM or E-mail his info.
I'm looking at a $120 alignment...But with the extra adjustment available,should be a "one and done" affair.
Drop me a line and let me know if I can help....

[lji372]

belle tire said the same thing but crane alignment had no problem :dunno:

[Limited360]

Camber bolts are made by SPC...

http://www.spcperformance.com/component/spc/?task=part_description&pid=87365&region=USA&make=Mercury&model=Marauder&year=2003+-+2004&from=USAFrom&to=USATo


ordering a set of these soon as the new car needs em bad!