Log in

View Full Version : New Transmission


Triple Threat
08-19-2013, 04:37 PM
With purple being a drag race only car, we replaced the FB performance street/strip forward valve body transmission w/ overdrive with ATI TH 400 built transmission w/ reverse valve body; new 9" converter; flexplate; shifter; trans cooler and new drive shaft which will be here in two days. This should improve out R/T and 60' ft. times.

http://www.mercurymarauder.net/gallery/data/500/parts_aug_19_001.JPG
LJ on 24's
08-19-2013, 05:08 PM
With purple being a drag race only car, we replaced the FB performance street/strip forward valve body transmission w/ overdrive with ATI TH 400 built transmission w/ reverse valve body; new 9" converter; flexplate; shifter; trans cooler and new drive shaft which will be here in two days. This should improve out R/T and 60' ft. times.

http://www.mercurymarauder.net/gallery/data/500/parts_aug_19_001.JPG

What is the engine specs on purple.
sailsmen
08-19-2013, 05:15 PM
The Jet Marauder does not need a transmission.;)
babbage
08-19-2013, 06:12 PM
Top shelf Joe! Looks really good, who did you get the driveshaft from?
lji372
08-19-2013, 06:19 PM
Hi dad!! (Says your long lost son):D
CameronVic
08-19-2013, 11:44 PM
I'm super jealous of that case! No need for a shield with that! Everything is already SFI approved! I think those cost like $1700 just to get your feet wet, and that's with nothing inside! HAHA I'll have one some day!
MOTOWN
08-20-2013, 12:48 AM
Looks like someones not playin around! sweet
Triple Threat
08-20-2013, 04:36 AM
Top shelf Joe! Looks really good, who did you get the driveshaft from?

Driveshaft is from PST driveshafts in florida.I also use his driveshaft in the race car.
Triple Threat
08-20-2013, 04:58 AM
What is the engine specs on purple.

It is a Boss 5.0 iron block bored and stroked to 324 c.i. with Lunati crank,Manley h beam rods, Ross custom pistons.Comp.is9.9/1.Billet gear oil pump.The heads are from a 04 and are cnc ported with custom grind Billet cam shafts and a port matched intake.It has a Procharger D-1 blower with 21 lbs. boost,80# injectors,and we use c-16 gas.Engine management is from a Holley HP EFI computer with a custom tune from Dez Racing.
Last dyno run was 639 hp and 549 torque.
jflave
08-20-2013, 08:36 AM
That is some bad a$$ machine. :2thumbs:
Seneca
08-20-2013, 06:19 PM
Nasty!! Lookin good!;)