OEM Auto Meter Gauges FREE! O.O

[Invader]

Yep, you read right. Free to good home. Everything was working when I removed them. All that I'm charging is shipping. First come first served....http://img.tapatalk.com/d/13/08/27/pa7esavu.jpg

[babbage]

pm sent! 56789

[Baconbit]

How much for shipping to 26003?

[Invader]

Figure it'll be like $20.00 anywhere in the lower 48 states.

[Invader]

I upgraded, so I no longer need them. I would like them to go to someone who needs them. VS someone who is just going to resell them.

[Invader]

This is what I went with..http://img.tapatalk.com/d/13/08/27/re3ajupe.jpg

[Guittard22]

My volts one is Cracked if not send to Babbage or sold please let me know .

[Invader]

My volts one is Cracked if not send to Babbage or sold please let me know .

They're going to Babbage, but PM him and y'all can work it out.

[capt512]

Wow those new ones look nice, what do they look like at night Invader?

[wannaMM]

Looks really good---Is on my "must do" list, as I want an oil gauge that gives actual values....Any fitment problems with install?

[Invader]

Wow those new ones look nice, what do they look like at night Invader?

http://img.tapatalk.com/d/13/08/28/abuba7y2.jpg

I haven't had a chance to wire them up yet. But you get the idea.

[Invader]

Looks really good---Is on my "must do" list, as I want an oil gauge that gives actual values....Any fitment problems with install?

The only problem was the spacer tube. I took a piece of steel brake line and a tube cutter to get the right length. Other than that it was smooth sailing. When I removed the pod I was praying that I didn't break anything. But it popped right out. Just make sure you lay a towel down under the pod to cover the center console. Nobody likes a oops WTF!!! :lol:

[L.Mark]

How hard is it to replace the stock ones with 'real' ones. Is it just a plug and play???

[Cobra25]

This is what I went with..http://img.tapatalk.com/d/13/08/27/re3ajupe.jpgThey look really nice. Stop by the Tower Shops one friday & say hello, I'd like to see the gauges also.

[Invader]

They look really nice. Stop by the Tower Shops one friday & say hello, I'd like to see the gauges also.

I don't have it plated yet. ( it's under construction! ) But it will be one of my first stops after she's on the road.

[Invader]

How hard is it to replace the stock ones with 'real' ones. Is it just a plug and play???

No, unfortunately not. But some of the pre-existing hot feeds can be used. I'm sure you can patch it in, but I'm going to re-wire a lot of the dash anyways.

[LOWBUCKMM]

How hard is it to replace the stock ones with 'real' ones. Is it just a plug and play???

I replaced both of my gauges and you don't need to run extra wires. just cut the harness of the old ones and rewire to the new ones with male spade conntecters.

[Invader]

Wow those new ones look nice, what do they look like at night Invader?

I finally got them wired up. Here is what they look like. I still have to run the feed for the Oil Pressure Sender.
http://img.tapatalk.com/d/13/10/03/sege3y6y.jpghttp://img.tapatalk.com/d/13/10/03/gatu6ahe.jpg

[Mebot]

That looks real good man! Your marauder has come a long way from the basket case you told me it was. Congrats and keep it coming

sent from a Samsung Galaxy far far away...

[sflrainmaker01]

Very cool! Sounds like you are working on your own RescuRauder! ;) Let me know when you plan on heading over to the Tower Shops. Maybe, I can meet you (and the others) and check out your car. In fact, maybe the transformation of the rear of my car will be done by then, too! :P

[cragantler]

My volts one is Cracked if not send to Babbage or sold please let me know .

PM sent.
Hey this avatar ^^^looks familiar:beatnik:

[fastblackmerc]

I replaced both of my gauges and you don't need to run extra wires. just cut the harness of the old ones and rewire to the new ones with male spade conntecters.

You will also need to connect a ring terminal to the sending unit wire to connect it to the new sending unit.

[babbage]

I finally got them wired up. Here is what they look like. I still have to run the feed for the Oil Pressure Sender.
http://img.tapatalk.com/d/13/10/03/sege3y6y.jpghttp://img.tapatalk.com/d/13/10/03/gatu6ahe.jpg


Looks real good! What's the green LED for?

[Invader]

Looks real good! What's the green LED for?

I moved the O/D light off the dash. Sense I replaced all my main cluster with LED's, it was like super bright. And in my line of sight while driving. This way with it down there, I can still see it. But it's not distracting.

[Invader]

You will also need to connect a ring terminal to the sending unit wire to connect it to the new sending unit.

My sender for the Phantom 2 gauges, has 3 wires. So all that I used in the dash was the ignition hot wire, the dash light feed and the ground. And then I ran the other 3 through the fire wall.

[Baaad GN]

Hey if no one takes them I could use them so put me on the list!

[Invader]

Hey if no one takes them I could use them so put me on the list!

They're gone, Babbage got them. Sorry Bud!