Part#

[Dre1842]

Guys, I wanted to know the part# for the Flowmaster Super 44 muffler(Stainless steel) swap.

This will go on a stock exhaust with 2nd cats removed.
Should I go 2.25 or 2.5?

I couldn't find any old posts on this.........

[Dre1842]

Would the below muffler work with the stock exhaust (2nd cats removed)?

http://www.jegs.com/i/Flowmaster/389/842546/10002/-1?parentProductId

[Dre1842]

HELLLOOOOOOOOO

All these views, can I get some help...........

[justbob]

The 2 1/2" is what I used to have like three exhausts ago. IMO it looked utterly dumb and should have been the 2 1/4"

http://www.jegs.com/i/Flowmaster/389/842446/10002/-1?parentProductId=814392

Other than that, they don't make a case even close to long enough, so no matter what it will need at least 6" of lead pipes welded to it.

To answer your question, they don't make a "replacement" muffler. Magnaflow's 18" case is a much better fit.


Self proclaimed Builder Of Badassery.

Buy it, Break it, Build it BETTER.
"Since 2004"

[MOTOWN]

The 2 1/2" is what I used to have like three exhausts ago. IMO it looked utterly dumb and should have been the 2 1/4"

http://www.jegs.com/i/Flowmaster/389/842446/10002/-1?parentProductId=814392

Other than that, they don't make a case even close to long enough, so no matter what it will need at least 6" of lead pipes welded to it.

To answer your question, they don't make a "replacement" muffler. Magnaflow's 18" case is a much better fit.


Self proclaimed Builder Of Badassery.

Buy it, Break it, Build it BETTER.
"Since 2004"

very true! the factory muffler is like 23" Magnaflow also makes a 23" or 24", but like quiet:rolleyes:

[Dre1842]

Does Magnaflow offer a aggressive muffler similar to the super 44's?
23" or 24"?



The 2 1/2" is what I used to have like three exhausts ago. IMO it looked utterly dumb and should have been the 2 1/4"

http://www.jegs.com/i/Flowmaster/389/842446/10002/-1?parentProductId=814392

Other than that, they don't make a case even close to long enough, so no matter what it will need at least 6" of lead pipes welded to it.

To answer your question, they don't make a "replacement" muffler. Magnaflow's 18" case is a much better fit.


Self proclaimed Builder Of Badassery.

Buy it, Break it, Build it BETTER.
"Since 2004"

[Dre1842]

Bump.........help

[Ozark Marauder]

Might help......

http://www.mercurymarauder.net/forums/showthread.php?t=51262

http://www.mercurymarauder.net/forums/showthread.php?t=73952

http://www.mercurymarauder.net/forums/showthread.php?t=40045

http://www.mercurymarauder.net/forums/showthread.php?t=37602

OZ

[Dre1842]

Alright, this will work. Thanks!


Might help......

http://www.mercurymarauder.net/forums/showthread.php?t=51262

http://www.mercurymarauder.net/forums/showthread.php?t=73952

http://www.mercurymarauder.net/forums/showthread.php?t=40045

http://www.mercurymarauder.net/forums/showthread.php?t=37602

OZ