Getting to MV11 from Canada

[WPG_Merc]

Still on my way to MV 11 from Canada and stuck in Sioux Falls,SD.The car is running way to rich and hopefully The dealer in town can ajust the the injectors mon morning

So I can get there in time for mv11

[Curless]

The dealer???? I would say not, get a hold of Marty or Lidio or someone who has a tune they can send you for your excal...I doubt the dealer can help

[CWright]

The dealer???? I would say not, get a hold of Marty or Lidio or someone who has a tune they can send you for your excal...I doubt the dealer can help


+1^ On what Chris said. Then once you get here I'd say get it to Marty's shop for Jeff to look deeper into the issue.

[MyBlackBeasts]

+1^ On what Chris said. Then once you get here I'd say get it to Marty's shop for Jeff to look deeper into the issue.

Yes, Marty can email you a tune you can transfer to your Xcal & load.

Then if still an issue when you get there I'm sure Marty will help you out.

[slickster]

+3'!!!!!!!!!!:burnout:

[WPG_Merc]

The injectors are running way to rich Causing probs and i am running out of time
To get there.need at 2 long driving days to make it
To GA.

[martyo]

Call me on my cell (914) 582-6262

I have offered to help you but you didn't take me up on it so I will need an update on what you have done so far.

Meanwhile, a dealer will be able to do absolutely NOTHING for you -- you can not adjust the cams -- that is just not the way it works.....

[WPG_Merc]

The injectors are running way to rich Causing probs and i am running out of time
To get there.need at 2 long driving days to make it
To GA.

The fuel is way to rich with the 42 lbs injectors. No gas in the oil.
Causing lot of codes
If Martyo or lido could send a temporary tune to get there.
My email is wpg_merc@live.com

[MyBlackBeasts]

The fuel is way to rich with the 42 lbs injectors. No gas in the oil.
Causing lot of codes
If Martyo or lido could send a temporary tune to get there.
My email is wpg_merc@live.com

Give Marty a call, see post #7.

[CWright]

Give Marty a call, see post #7.

Yes, yes, YES!!!!!!! :beer:

[Curless]

Call Marty, stop whining....

[MyBlackBeasts]

Call Marty, stop whining....


:rofl::lol::rofl::lol::rofl:

[martyo]

I just got off the phone with him.

[MyBlackBeasts]

I just got off the phone with him.



Hallelujah!!! :bows:

Thought I was going to have to headslap someone probie! (a little NCIS reference there Maynard!) :D

[MarauderMike]

Hallelujah!!! :bows:

Thought I was going to have to headslap someone probie! (a little NCIS reference there Maynard!) :D

Oh man, don't reference Dobie!

[martyo]

I just got off the phone with him.

I sent Jeff to the shop to get his laptop so we could do a tune this evening. Gordon is supposed to send me the information we need to do the tune.

Hopefully, I will hear from Gordon soon because we are two hours ahead of him and we need our beauty sleep!

[CWright]

I sent Jeff to the shop to get his laptop so we could do a tune this evening. Gordon is supposed to send me the information we need to do the tune.

Hopefully, I will hear from Gordon soon because we are two hours ahead of him and we need our beauty sleep!



Great Customer service as usual! :bows:

[WPG_Merc]

For Martyo


The address is 501- 640 Mathis ave
Winnipeg,MB
R2V 35V


MM door code for the CPU is CRD0


Xcal # A04250810000B25B


Mods
Kooks mid length tube headers
2 & a half inch exhaust front to back w none res 4 inch tips
Xpipe with with 2 high flow cats & magna flow mufflers
Comp Cams stage 3 N/A blower cams
Manly 4V springs
PHP intake spacer
42 lbs injectors (green in color)
90 lighting mass air ( not installed yet)
KRC 100 micron inline fuel filter
B&M shift kit
Stewart EMP water pump
Steeda under drive pulleys
Granatelli coil on plug connectors
JLT Ram Air
Ford motor sports 410 gears
8.8 girdle cover
Xcal 2 tuner
Nitto tires nt 555 front 235/50/zr18/101w
Nt 420 rear 255/55R18/109v
RP oils
Addco front & rear sway bars
Metco upper & lower sway bars

[WPG_Merc]

For Martyo


The address is 501- 640 Mathis ave
Winnipeg,MB
R2V 35V


MM door code for the CPU is CRD0


Xcal # A04250810000B25B


Mods
Kooks mid length tube headers
2 & a half inch exhaust front to back w none res 4 inch tips
Xpipe with with 2 high flow cats & magna flow mufflers
Comp Cams stage 3 N/A blower cams
Manly 4V springs
PHP intake spacer
42 lbs injectors (green in color)
90 lighting mass air ( not installed yet)
KRC 100 micron inline fuel filter
B&M shift kit
Stewart EMP water pump
Steeda under drive pulleys
Granatelli coil on plug connectors
JLT Ram Air
Ford motor sports 410 gears
8.8 girdle cover
Xcal 2 tuner
Nitto tires nt 555 front 235/50/zr18/101w
Nt 420 rear 255/55R18/109v
RP oils
Addco front & rear sway bars
Metco upper & lower sway bars

Also to add the plugs are NGK TR6 gaped 45
New timing set guides,chains,sprockets & gears

[WPG_Merc]

[QUOTE=WPG_Merc;1331580]Also to add the plugs are NGK TR6 gaped 45
New timing set guides,chains,sprockets & gears[/QUOTE
The parts were from modular mustang racing in,CA

[martyo]

I will get you the tune as soon as possible.

You should plan on having new plugs put in the car because with it running so rich the plugs in it are probably shot.

Oh, and take your address out of your posts. No need to leave that floating on a public forum.

[lji372]

I will get you the tune as soon as possible.

You should plan on having new plugs put in the car because with it running so rich the plugs in it are probably shot.

Oh, and take your address out of your posts. No need to leave that floating on a public forum.

Too late!! I already sent my crew to his pad :laugh:

No really, edit that out:shake:

[martyo]

The tune has been sent.

[CWright]

Keep us posted! :beer:

[WPG_Merc]

How do up load from lap top to xcal2

[martyo]

How do up load from lap top to xcal2

I discussed this with you on the phone earlier this evening and sent you an e-mail a little while ago. I hope that helps.

[WPG_Merc]

The tune is in the car & runs better but burps a little ,stable enough to Laweranceville GA,should be there before 5
On the 18.In Columbia Missouri now ,then tomorrow St. Louis to see the big arch then on
To Tennessee. I did see a fatality in Iowa , a semi destroyed a SUV.


Thanks Martyo for the help see u in GA
U rock

[lji372]

.....................

[Ms. Denmark]

Glad things are working out. It's great to have friends (Martyo, especially) who can really help, but that's what makes MM.net invaluable when you own a Marauder. BTW sorry to hear about the tradgedy in my home state. Safe travels and enjoy MV!

[martyo]

The tune is in the car & runs better but burps a little ,stable enough to Laweranceville GA,should be there before 5
On the 18.In Columbia Missouri now ,then tomorrow St. Louis to see the big arch then on
To Tennessee. I did see a fatality in Iowa , a semi destroyed a SUV.


Thanks Martyo for the help see u in GA
U rock

Phew!

I was worried when I did not hear back from you.

Please let me know when you want to come in so we can tune the car in person.

This week is busy for some reason! :D

[WPG_Merc]

Hey Martyo I am Still here ,leaving Hopkinsville Kentucky At 9 am should be at the laweranceville Hotel by 3pm Atlanta time. I'll find a place
To get new plugs.I am open to when
Ever your schedule allows.
Thanks to everyone for the support.


Never been this far south before & everything
I read on here is great.