View Full Version : Stage 4 Ported Eaton by Stiegemeier
tbone
09-24-2013, 05:24 PM
Would a stage 4 ported Eaton by Stiegemeier be a benefit to a stock motor over a stock M112? I suppose the pulley size is the determining factor in blowing up or not blowing up a stock motor. I have a line on one. I think I'm finally going to take the plunge.
MM2004
09-24-2013, 05:29 PM
Tom,
Mine is a stage 3 @ 11 lbs. Conservative tune as how I wanted it. 
Be careful with what you are doing. You'll grenade the engine if you push high 400 HP on a stock block and internals.
Mike.
JoeBoomz
09-24-2013, 09:30 PM
My engine internals held up fine, where it failed was an overheat on #8.  Get a cooling mod for cheap insurance and you can enjoy the stock motor if its tuned safely.
Sully008
09-25-2013, 07:14 AM
Go with a bigger pulley to keep boost down. Then if/when you decide to turn up the wick you can pulley down.
tbone
09-25-2013, 10:51 AM
This is the kit except for the ported Eaton. What do you guys think? 
 
http://i.ebayimg.com/t/2003-2004-Ford-Mustang-SVT-Cobra-Eaton-Supercharger-Swap-99-01-Cobra-Mach-1-/00/s/MTIwMFgxNjAw/z/GA0AAMXQ7j1SJqDM/$T2eC16dHJIIFHKEW1ZpRBSJqDLQMt !~~60_57.JPG
justbob
09-25-2013, 03:47 PM
Price better be right because I see a whole lot of useless parts. Remember Tom, there is many things we do not share with the Mustangs.
Self proclaimed Builder Of Badassery.
Buy it, Break it, Build it BETTER.
                 "Since 2004"
guspech750
09-25-2013, 07:52 PM
Yes. Useless junk parts included. 
Sent from The White House on taxpayers dimes. 
DTR + 4.10's + Eaton swap = Wreeeeeeeeeeeeeeedom
tbone
09-25-2013, 07:56 PM
Ok, I'll wait until someone pulls one off a Marauder and wants to sell it. I'm glad I posted this. Thanks guys.
Vortech347
09-25-2013, 08:28 PM
You won't see a ton of additional boost if you're pulley'd to 10-12psi.  Its when they get over spun like crazy the porting starts to shine.
But you will see slightly cooler intake temps at lower PSI's.
JoeBoomz
09-25-2013, 09:19 PM
If that kit was from mustang-solutions on eBay I recommend skipping on it.  I have had issues with him recently trying to complete a deal as agreed upon.  Took over three months and a PayPal chargeback to resolve.
tbone
09-26-2013, 02:12 AM
If that kit was from mustang-solutions on eBay I recommend skipping on it. I have had issues with him recently trying to complete a deal as agreed upon. Took over three months and a PayPal chargeback to resolve.
 
That's the guy.
yjmud
09-26-2013, 04:47 AM
Yes. Useless junk parts included. 
Sent from The White House on taxpayers dimes. 
DTR + 4.10's + Eaton swap = Wreeeeeeeeeeeeeeedom
not useless just not right for your application resell to recoup some of your money
guspech750
09-26-2013, 06:50 PM
not useless just not right for your application resell to recoup some of your money
Meh. Useless. 
My time to try and sell that junk is more valuable than the spare change that junk will bring. 
Sent from The White House on taxpayers dimes. 
DTR + 4.10's + Eaton swap = Wreeeeeeeeeeeeeeedom
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.