PDA

View Full Version : Need help with lights plz!


airjordan2k8
10-15-2013, 07:47 PM
No lights are working interior outside lights nothing is coming on.. Just my head lights when i turn on the car.. Can somebody plz help me with this? Thanks

Sent from my LG-MS910 using Tapatalk
B.C. Bake
10-15-2013, 08:12 PM
No lights are working interior outside lights nothing is coming on.. Just my head lights when i turn on the car.. Can somebody plz help me with this? Thanks

Sent from my LG-MS910 using Tapatalk

Possibly a relay in the LCM. Common trouble.
airjordan2k8
10-15-2013, 08:24 PM
this is actually a lcm i got from fastblackmerc..

Sent from my LG-MS910 using Tapatalk
jwibbity
10-15-2013, 10:52 PM
stupid question but did you check all your fuses?!
airjordan2k8
10-16-2013, 05:03 PM
Ok so i unplugged one of the ballast and it was full of water so i let it dry and reconnected, bam everything started working again.:D

Sent from my LG-MS910 using Tapatalk
B.C. Bake
10-16-2013, 06:37 PM
There ya go...:beer: probably good thing you had the better or fixed LCM. A ground or short can be hard to find, and messes with all the electrical, anyway sounds like problem solved.:).
fastblackmerc
10-31-2013, 05:39 AM
Ok so i unplugged one of the ballast and it was full of water so i let it dry and reconnected, bam everything started working again.:D

Sent from my LG-MS910 using Tapatalk
Here's my tip for the day......

Pack the female connector with silicone dielectric gease before connecting them together.
RF Overlord
10-31-2013, 07:47 AM
The ballast was full of water, or just the connector?
airjordan2k8
10-31-2013, 09:07 AM
Here's my tip for the day......

Pack the female connector with silicone dielectric gease before connecting them together.
Will be doing that.. the female connector looks brown already.. hey FBM would be able to tell me why sometimes the passenger hid turns off, if i turn them on n off it turns back on...
airjordan2k8
10-31-2013, 09:08 AM
The ballast was full of water, or just the connector?
the male part of the ballast was full of water not actually inside the ballast..
ctrlraven
10-31-2013, 09:10 AM
Will be doing that.. the female connector looks brown already.. hey FBM would be able to tell me why sometimes the passenger hid turns off, if i turn them on n off it turns back on...
Most common issue is power/ground connections. Try changing your ground to another location free of any paint (use sandpaper) and make sure the terminal is touching the threads of the bolt/screw.
fastblackmerc
10-31-2013, 12:19 PM
Will be doing that.. the female connector looks brown already.. hey FBM would be able to tell me why sometimes the passenger hid turns off, if i turn them on n off it turns back on...

I bet the contacts inside the connectors are either not making a good connection or are dirty... or both. Could also be a bad ground issue. Since the HID use the factory wiring harness for power and ground I have seen issues with the ground wiring in the factory harness getting all corroded.