Ngk tr6

[Blk04MM]

Hated to make a thread just for a part # but I couldn't locate it on here. The parts stores are being their usual slow telling me they don't have a plug for the MM in the brand they need a part # :shake:


Thanks

[RF Overlord]

The part # is 4177

[fastblackmerc]

I always ask for "NGK TR6".

[RubberCtyRauder]

Ngk tr6 is prolly not listed for marauder but prolly mach 1 or cobra. It is the plug though alot of us use

[Blk04MM]

The part # is 4177

Thanks. That's what I had

I always ask for "NGK TR6".

I did.


Ngk tr6 is prolly not listed for marauder but prolly mach 1 or cobra. It is the plug though alot of us use

That's exactly what it is. Not listed for the marauder so they were telling me they don't have any in for my car. But I got them.

Thanks all :beer:

[whitey]

Ive learned to just ask for a part, not even mention what its for...such as a relay for the lcm.

[BUCKWHEAT]

Hated to make a thread just for a part # but I couldn't locate it on here. The parts stores are being their usual slow telling me they don't have a plug for the MM in the brand they need a part # :shake:


Thanks
Autozone Stock #4177 for copper NGK tr6 for $2 each, $17.50 including tax at the Autozone in Maplewood, MO

[tbone]

Don't they make a platinum plug with .030 gap for supercharged applications?

[justbob]

Don't they make a platinum plug with .030 gap for supercharged applications?

Your best with copper.


Self proclaimed Builder Of Badassery.

Buy it, Break it, Build it BETTER.
"Since 2004"

[LSCR351]

I ordered a set yesterday from LateModdelRestoration for $24.99. My local parts store wanted $11 a piece for them!

[1Marauder]

OK next question... what plug wires should I replace along with the plugs???

[MOTOWN]

OK next question... what plug wires should I replace along with the plugs???

LOL there are no plug wires to replace, part of the wiring harness:lol:

[RubberCtyRauder]

Plug wires? there are no plug wires of the traditional sense..There are COPS..or Coil On Plug..and most recommend Motorcraft..Some have used granetelli, or MSD or Accell..Not sure if any are better then the others

[RacerX]

OK next question... what plug wires should I replace along with the plugs???
The ones that go to the ignition switch...

[tbone]

Your best with copper.


Self proclaimed Builder Of Badassery.

Buy it, Break it, Build it BETTER.
"Since 2004"

I ordered the NGK TR6's. I'm curious why copper is better than platinum in the supercharged MM's.

[tbone]

I ordered a set yesterday from LateModdelRestoration for $24.99. My local parts store wanted $11 a piece for them!

I got the NGK's (8) on ebay for $19.95 shipped.

[Blk04MM]

(8) for $23 here at the parts store

[justbob]

Suckers. I paid $1.99 each at Oriellies. :P


Self proclaimed Builder Of Badassery.

Buy it, Break it, Build it BETTER.
"Since 2004"

[Blk04MM]

Suckers. I paid $1.99 each at Oriellies. :P


Self proclaimed Builder Of Badassery.

Buy it, Break it, Build it BETTER.
"Since 2004"

Lol ....SO :lol:

[tbone]

Suckers. I paid $1.99 each at Oriellies. :P


Self proclaimed Builder Of Badassery.

Buy it, Break it, Build it BETTER.
"Since 2004"

For the extra $2.00, I got to shop in my underwear and denied this crappy state of ours tax money.:D

[1Marauder]

yea while pulling on your plug wires... I know it needs replacing.

[JBeezy]

Not sure if anyone does this, but I always purchase my parts online and use a discount code from Brads deals, then pick them up in the store. You can save a good bit of money this way.

[Richy04]

I use Advanced with a code online and go pick them up at the store, you save 20-25% doing it that way. I just installed 8 Motorcraft sp-433's which are platinum/iridium plugs and they are great. 3.09 each minus the on line discount and it came to 18 bucks.