PDA

View Full Version : Stock exhaust size


cobrakid
11-18-2013, 06:50 PM
What is the stock exaust size and does anyone know of a good way to put the coneeng 4 inch tips


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)
fastblackmerc
11-18-2013, 07:04 PM
What is the stock exaust size and does anyone know of a good way to put the coneeng 4 inch tips


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)

OEM exhaust size is a mixture of 2.25, 2.5 and maybe some 2.0 inch also. The tips will need to be welded on.
Mr. Man
11-18-2013, 07:06 PM
What he said^^^^
cobrakid
11-18-2013, 07:30 PM
Where the tips get welded on is that 2.5 or smaller


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)
ChiTownMaraud3r
11-18-2013, 07:36 PM
When replacing the mufflers only, are the ends (inlet/outlet) 2.5"?
fastblackmerc
11-18-2013, 07:47 PM
When replacing the mufflers only, are the ends (inlet/outlet) 2.5"?

Yes, you'll need center & offset mufflers.
cobrakid
11-18-2013, 07:51 PM
So where the tips are is a 2.5 inlet?


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)
ChiTownMaraud3r
11-18-2013, 07:52 PM
Yes, you'll need center & offset mufflers.

Don't mean to hijack thread but I did not know this. If going with Aero Turbines, do you have to buy special ones, or just the AT2525 and have some pipe work done to get it to work?

And I believe the end of the tips where they get welded on looks like a 2.5".
cobrakid
11-18-2013, 07:59 PM
Thanks


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)
Guittard22
11-18-2013, 08:21 PM
^^^
This site is amazing right :)
IwantmyMMnow!
11-18-2013, 09:02 PM
Don't mean to hijack thread but I did not know this. If going with Aero Turbines, do you have to buy special ones, or just the AT2525 and have some pipe work done to get it to work?

And I believe the end of the tips where they get welded on looks like a 2.5".

I bought the AT2525s....the guy that installed mine didn't have to do anything special for installation. He added a 1/8" x 3" or 4" collar between the stock exhaust pipe and the AT inlet/outlet to make the transition from 2.25 to 2.5 work, but that was it.
cobrakid
11-19-2013, 10:58 AM
^^^
This site is amazing right :)

Yup


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)
Vortech347
11-19-2013, 10:59 AM
To small... :D

10 character limit.
ChiTownMaraud3r
11-19-2013, 05:43 PM
I bought the AT2525s....the guy that installed mine didn't have to do anything special for installation. He added a 1/8" x 3" or 4" collar between the stock exhaust pipe and the AT inlet/outlet to make the transition from 2.25 to 2.5 work, but that was it.

Sweet. Thanks!
:beer: