HELP! need fuel pump assembly gasket

[marauder410]

well I put my new focus pump in last month and when taking assembly out I noticed the gasket that seals the aasemly to the gas tank had 2 of the 3 rubber pieces that line it up were ripped

so I onlu have 1 of 3 rubber nipples at line it up SOOO its almost impossible to line it up just perfect with only 1 there and everytime I fill my gas tank passed 1/2 tank start leading gas :mad2::mad2::mad2:

also I cannot find just the gasket anywhere???? does anybody here have one they are willing to sell me please...

or point me in the right direction in where to buy one at because I cannot find any without buying the whole assembly :shake:

[marauder410]

come on guys

someone HAS to have one laying around they don't need or plan on using...I leaking gas bad

[lji372]

36726

Is this the rubber gasket you speak of?

[MOTOWN]

Lethal performance sells them for $30 i think it is

[lji372]

Weird question here, why not just put a couple dabs of super glue between it and the cover? :confused:

[burt ragio]

It aint rocket sceince make your own gasket. Trace one out on anthing that will not break down resistant to gas & oil.

[lji372]

It aint rocket sceince make your own gasket. Trace one out on anthing that will not break down resistant to gas & oil.

I think op just want one with the nibs :confused:

[marauder410]

ok I found out that liberty ford could get me one and m,y meinikie discount I paid 18.00 bucks

thanks guys and no you cannot make your own gasket and isn't recommended unless u want silicone floating in your gas tank :shake:

[marauder410]

I ryed to use a little vasaline to hold it in place and it works into I fill my tank up and then the pressure I guess..it start to leak..

so I ordered a new one is what I should have done when initialy installed it but...at least I work at a shop with a lift that I can use whenever were not busy :beer: it will be going on tom....

gotta get the little stuff back right on the rauder for winter

[lji372]

I ryed to use a little vasaline to hold it in place and it works into I fill my tank up and then the pressure I guess..it start to leak..

so I ordered a new one is what I should have done when initialy installed it but...at least I work at a shop with a lift that I can use whenever were not busy :beer: it will be going on tom....

gotta get the little stuff back right on the rauder for winter

I guess I went out to the garage for nuthin:alone:

[fastblackmerc]

ok I found out that liberty ford could get me one and m,y meinikie discount I paid 18.00 bucks

thanks guys and no you cannot make your own gasket and isn't recommended unless u want silicone floating in your gas tank :shake:

If you apply the silicone right that won't happen.


I ryed to use a little vasaline to hold it in place and it works into I fill my tank up and then the pressure I guess..it start to leak..

so I ordered a new one is what I should have done when initialy installed it but...at least I work at a shop with a lift that I can use whenever were not busy :beer: it will be going on tom....

gotta get the little stuff back right on the rauder for winter

Vaseline.... Really??? :shake: Maybe some KY would have worked! :eek:

[lji372]

I ryed to use a little vasaline to hold it in place and it works into I fill my tank up and then the pressure I guess..it start to leak..

so I ordered a new one is what I should have done when initialy installed it but...at least I work at a shop with a lift that I can use whenever were not busy :beer: it will be going on tom....

gotta get the little stuff back right on the rauder for winter

If it falls through and isn't the right one I have one here for you:beer:

[marauder410]

thanks lji but it goty deleived to my work today and installed it within an hour time and filled her up and :beer: no leaks.....
my old gasket was just sooo stretched out I can see why not I wasent doing its job???

it was motorcraft and was usually 25.00 but after my discount because we do a lot of business with liberty ford got it for 17 buck cant beat that and free labor is always good???

getting all the little gremlins out before winter really hits us it getting cold really fast here in Maryland..:shake:

[Mebot]

getting all the little gremlins out before winter really hits us it getting cold really fast here in Maryland..:shake:

Damn straight! I took my Marauder out once before all this rain/sleet came and of course my BCM started acting up. No heat, defrost or any air.

Was meaning to get that looked at during summer months but of course I procrastinated. C'est la vie

sent from a Samsung Galaxy far far away..