Billet Aluminum Eaton Swap Brackets

[lji372]

$650 to your door (if in the contiguous u.s.)

Please email questions or paypal to :

lji_372@yahoo.com

They will go out for clear anodize next week.
They will also get stainless steel heli-coil inserts put in for stronger threads
Stands will be pressed in after anodize in case your wondering where they are

Better pics in post 35. Thank you James :bows:

36755

[Limited360]

Another quality in house machined part from Jerry!

[jwibbity]

Yea jerry!!

[MOTOWN]

Dayum man your about to blow up!!!!! Lol

[Shaijack]

Looking great Jerry.

[guspech750]

You da man JERRY!!


Sent from The White House on taxpayers dimes.

DTR + 4.10's + Eaton swap = Wreeeeeeeeeeeeeeedom

[Gixerdevil]

Ordered mine...

Gixerdevil
2003 BMM #2700 38K miles

[slickster]

Wow just what i need. Question whats the average price for brackets that are not nice like this

[MM2004]

Wow just what i need. Question whats the average price for brackets that are not nice like this

These brackets demand a cost as they are "specially" made for an Eaton swap.

They are a necessity, and only 2 people (now) make them.


;)

Mike.

[justbob]

Small price to pay to just simply bolt stuff on with zero headaches.. Nice work Jerry and thanks for your time and effort in making these!


Self proclaimed Builder Of Badassery.

Buy it, Break it, Build it BETTER.
"Since 2004"

[J-MAN]

Jerrys so dreamy. :lovies:

[Curless]

Jerrys so dreamy. :lovies:

BACK OFF! Jerry is mine!:mad2:;)

[guspech750]

BACK OFF! Jerry is mine!:mad2:;)

Did you order your brackets from Jerry yet?

;)


Sent from The White House on taxpayers dimes.

DTR + 4.10's + Eaton swap = Wreeeeeeeeeeeeeeedom

[RubberCtyRauder]

Did you order your brackets from Jerry yet?

;)


They would make good garage art for CBARS shop wall :lol:

[tbone]

I'll order a set as soon as funds permit. Christmas time, you know?

[jwibbity]

BACK OFF! Jerry is mine!:mad2:;)

once you go hawk nasty black, you dont go back,....:P

[sflrainmaker01]

I'll order a set as soon as funds permit. Christmas time, you know?

x2...:( Wait! Maybe the wife will hook me up for Christmas! :santaw: :santa: :lol:

[Limited360]

Did you order your brackets from Jerry yet?

;)


They would make good garage art for CBARS shop wall :lol:

Representing the CBARS!!!

http://img.tapatalk.com/d/13/12/01/te7ahe9a.jpg

[slickster]

These brackets demand a cost as they are "specially" made for an Eaton swap.

They are a necessity, and only 2 people (now) make them.


;)

Mike.

Who is the other guy

[Curless]

Did you order your brackets from Jerry yet?

;)


Sent from The White House on taxpayers dimes.

DTR + 4.10's + Eaton swap = Wreeeeeeeeeeeeeeedom

LMAO! :bows:;)

[Spectragod]

Will these work on a trilogy kit?

[lji372]

Came in from anodize today. I will prepare them for shipping Monday

:woohoo:

[tbone]

Are you shipping these with the bolts?

[lji372]

Yes sir. I should have those in Monday

[tbone]

I already bought the bolts, so with all due respect, are you offering a little break if you don't supply them Jerry?

[tbone]

Can you post a pic of the finished product on Monday?:drool:

[lji372]

Can you post a pic of the finished product on Monday?:drool:

Yes sir!!!!

[Limited360]

Edited from being a newb

[8UWITH6]

pictures.......... mmmmmmmmmm:banana2:

[Blackened300a]

Will these work on a trilogy kit?

Yeah, slight modification needed. I'm using eaton brackets on my car for the trilogy since I couldn't get trilogy brackets anywhere.

[lji372]

the stands on the tensioner bracket would need to be shortened

[tbone]

Pictures........???

[lji372]

When I get back to the shop.
Probably tomorrow.

[ChiTownMaraud3r]

Are these limited quantity runs? I also plan on picking some up after Christmas low funds time.

[Limited360]

Quality bits by Jerry once again!!!

http://img.tapatalk.com/d/13/12/15/yvyqetut.jpg

http://img.tapatalk.com/d/13/12/15/mype6a7e.jpg

http://img.tapatalk.com/d/13/12/15/quby7ujy.jpg


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1) so I may sound retarded.

[Gixerdevil]

Nice you took pics of my brackets...thanks....hehe

Gixerdevil
2003 BMM #2700 38K miles

[lji372]

Nice you took pics of my brackets...thanks....hehe

Gixerdevil
2003 BMM #2700 38K miles

:D yes sir!!!

[blkZooM]

what is the biggest lower one would be able to use? always been kinda lost on that

[RacerX]

4lb lower. Same as before. Very solid work Jerry. I should send you my upper when I have the engine out in the spring so you can use it as a template for the high hp tensioner bracket. 6lb lower on mine and lots of belt wrap. ;)

[lji372]

That would be awesome!!!

And I should go pull off limited360's blower and send it to you to port since his car is done for the winter. And since he just had back surgery he can't stop me :D


:wave: james

[Limited360]

That would be awesome!!!

And I should go pull off limited360's blower and send it to you to port since his car is done for the winter. And since he just had back surgery he can't stop me :D


:wave: james


I have a cane I can swing at you!!!

Seriously tho I do want my blower ported and the intake 90 bend and the throttle adapter to match a single bladed throttle body. I am all about making the engine breath easier and getting the boost level down for the same HP so I can then turn the boost back up!!!

Seriously Jerry, I will pay you in detailing ;) Plus you know I need my blower plate tapped for an IAT sensor and I have been looking for a good reason to change the alternator since this one squeaks when cold (brand new ford one in box on the shelf from previous owner)

Oh yeah and I hate how ugly the trilogy belt tensioner is.... make a new one of those too while your at it!!!

:banana: :banana: :banana: :banana:

Jerry I know you <3 me! :lol:

[Gixerdevil]

Ok my eaton swap came with a +4 lower and a 2.75 upper I am thinking thats abit much boost at 17lbs.....going to ditch 2.75 for a 3+ trying to only do a safe 10lbs... Dont want to pop motor cause built mtr will not be finish until next summer... No time with a two year old...hehe

Gixerdevil
2003 BMM #2700 38K miles

[tbone]

Now if I could just pull $650 out of my butt......

This is the last part I need and I'm ready to start the conversion.

[Limited360]

Now if I could just pull $650 out of my butt......

This is the last part I need and I'm ready to start the conversion.

Paypal BILL ME LATER.... come on and be 'Merican and just do it 6 months no payments!!! ;)

[tbone]

I'm expecting a big commission check next week. Do you have more ready to go?

[lji372]

I'm expecting a big commission check next week. Do you have more ready to go?

Yes sir:beer:

[Limited360]

Yes sir:beer:


Always the man , parts in hand not waiting for 10 people to commit before making an order!!

Got my locking valve caps.... Amassing products. Nothing but top notch!!!

I wonder what other projects this man has in the works. *suspect*


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1) so I may sound retarded.

[Gixerdevil]

Got my brackets in on Tues they are way better than I would have ever though..Perfect Thanks again

Gixerdevil
2003 BMM #2700 38K miles

[8UWITH6]

So what is the total number on brackets sold thus far?

[Limited360]

So what is the total number on brackets sold thus far?


Not enough to make this man happy....

Think LED's in blue need to wait as I blew through my stock doing my Silverado with a friend today... I did reorder a 20pk of 194's though. Need to get some. 3157's for ya too tho, I have spare projector reverse as they would t for the GM sockets, so all set there.

Plus I need to come visit the shop to finish the retrofit on the Silverado so I can order more for a retrofit for your Marauder sir! Need to trim the bezels just right for that perfect fit!

Almost cracked open that spare set of head lamps I have here in basement and got this ready to prep for retrofit.... Got a few more weeks of lazy at home tasks to do


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1) so I may sound retarded.

[tbone]

I will contact you in a couple days.

[tbone]

I placed the order with Jerry today. This is it. I'm officially DONE collecting parts for my Eaton swap. Spring can't come fast enough!!!!

:party:

[Limited360]

I saw some of these while I was at the shop the other day. You won't be disappointed!!!


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1) so I may sound retarded.

[tbone]

They look like works of art......yeah baby!

[guspech750]

I placed the order with Jerry today. This is it. I'm officially DONE collecting parts for my Eaton swap. Spring can't come fast enough!!!!

:party:

LOL. One is never done collecting until the project is complete. ;)

Good job Tom:burnout:


Sent from The White House on taxpayers dimes.

DTR + 4.10's + Eaton swap = Wreeeeeeeeeeeeeeedom

[tbone]

LOL. One is never done collecting until the project is complete. ;)

Good job Tom:burnout:


Sent from The White House on taxpayers dimes.

DTR + 4.10's + Eaton swap = Wreeeeeeeeeeeeeeedom

I've purchased all kinds of misc items like clamps, convolute, solder, bolts, etc. The only thing I really need are vacuum and coolant hoses which are easy peasy. All the big stuff is done plus some extra goodies like catch can, cooling mod, new EGR, TPS and more.

[lji372]

37325


In stock ready to go!!!

[lji372]

These brackets demand a cost as they are "specially" made for an Eaton swap.

They are a necessity, and only 2 people (now) make them.


;)

Mike.

And one of them is a vendor here :banana2:

[guspech750]

37325


In stock ready to go!!!

mmmmmmm. Yummy!!


Sent from The White House on taxpayers dimes.

DTR + 4.10's + Eaton swap = Wreeeeeeeeeeeeeeedom

[maraudergt]

Hi everyone
Which belt fits with that bracket????? someone telle me....
I read two parts numbers but are too long...
belt Napa#060988(99.5 inches)or
Napa#060990 ( 99 5/8th)
Before I´ve put 'k080550' in the old tensioner. Could fits the same ?????
Thank you so much

[guspech750]

Hi everyone
Which belt fits with that bracket????? someone telle me....
I read two parts numbers but are too long...
belt Napa#060988(99.5 inches)or
Napa#060990 ( 99 5/8th)
Before I´ve put 'k080550' in the old tensioner. Could fits the same ?????
Thank you so much

Here is my belt Sergio.
http://img.tapatalk.com/d/14/02/10/vyda3upa.jpg


Sergio, are you running one long continuous belt, or a two belt system? My belt is for a two belt system.

I've seen a few Eaton swaps running a one belt system so I thought I'd ask.

Sent from The White House on taxpayers dimes.

DTR + 4.10's + Eaton swap = Wreeeeeeeeeeeeeeedom

[lji372]

I believe he is on a two belt system, since he picked up a tensioner bracket. :beer:

Thank you for helping him out with the info :bows:

[maraudergt]

Thank you so much......
It is for two belt system for the bracket I got from lji372 ( thank you man).
I have the same system like you Joe. (K080514, Perfect)
the another pulleys and tensioner are the same as the stock...i would like to change all.....Some them have a little sound. And the alternator pulley sound too ( F5AZ-10344-A or MOTORCRAFT GP-712, Could be?).
But the another...I don´t know if are the same as the stock and the belt too.

In rockauto find that.(Belt drive pulley Motorcraft YS249 ,Belt tensioner 38189,Idler pulley 49001 , Rib belt 5060925. Shoud it works????

All help can I get will be well recived ;)

Thank you so much

[Drak]

Are these still available? Looking for them asap :)

[sflrainmaker01]

Here is my belt Sergio.



Sergio, are you running one long continuous belt, or a two belt system? My belt is for a two belt system.

I've seen a few Eaton swaps running a one belt system so I thought I'd ask.

Sent from The White House on taxpayers dimes.

DTR + 4.10's + Eaton swap = Wreeeeeeeeeeeeeeedom

One belt system or two belt system? Is this something new or just a different way to set up the Eaton?

[Zack]

One belt system or two belt system? Is this something new or just a different way to set up the Eaton?

He's referring to A Kenne Bell setup for a Mach 1. ( on a marauder)

[lji372]

sergio ordered a tensioner bracket a couple months ago. i'm assuming he's all set since i haven't heard anything :dunno:

[Limited360]

Here is my belt Sergio.
http://img.tapatalk.com/d/14/02/10/vyda3upa.jpg


Sergio, are you running one long continuous belt, or a two belt system? My belt is for a two belt system.

I've seen a few Eaton swaps running a one belt system so I thought I'd ask.

Sent from The White House on taxpayers dimes.

DTR + 4.10's + Eaton swap = Wreeeeeeeeeeeeeeedom

The new greenstripe belt I got.. HD version... is completely green on outside... curious to see how that works out.