fog light help?

[kcmm]

I recently purchased fog lights from a member on here and i was going to begin the install but i found out that the owner before me clipped the connectors off. There clipped off where the wire from the light plugs in. Does anyone have a part number on those connectors or a way to bypass the connectors (i dont know if thats an option just guessing)? Any info would be greatly appreciated

[Limited360]

Connector to the factory harness?

If so chop off the car side and add this to the harness...


http://www.amazon.com/Delphi-Packard-Weatherpack-Terminal-16-14/dp/B004DVM7RG/ref=sr_1_1?ie=UTF8&qid=1388452094&sr=8-1&keywords=weatherpack

[fastblackmerc]

I recently purchased fog lights from a member on here and i was going to begin the install but i found out that the owner before me clipped the connectors off. There clipped off where the wire from the light plugs in. Does anyone have a part number on those connectors or a way to bypass the connectors (i dont know if thats an option just guessing)? Any info would be greatly appreciated

If you need the bulb connectors I have some. PM me if you need them.

[kcmm]

I believe i have the bulb connectors its cut of from the wire that leads to the factory harness.

[Limited360]

I believe i have the bulb connectors its cut of from the wire that leads to the factory harness.

Use the weather pack and cut off the factory connector.... done and done!

:beer:

[fastblackmerc]

I believe i have the bulb connectors its cut of from the wire that leads to the factory harness.

Add wires, solder and heat shrink the connections, cut the factory connector off on the other end, and use the Weatherpak connections as stated. Wrap it all in some convoluted tubing.

[kcmm]

Will be tackling this shortly thank you guys for the advice