31 Spline Axle other than Ford?

[sailsmen]

I am told Ford 31 spline axle shafts: 6W1Z-4234-A are on back order with no date on when available.

Can anyone recc an aftermarket 31 spline axle?

[MOTOWN]

Yep MOSER!

[1 Bad Merc]

Check out Yukon 31 spline axles. When you order them make sure they are the ones that come with the abs rings. Very happy with my set.

[chief455]

Check out Yukon 31 spline axles. When you order them make sure they are the ones that come with the abs rings. Very happy with my set.
+1 Yukon is making strong differential components - my 9" Trac-loc and Detroit Lockers are bullet proof!!

[sailsmen]

Thanks. Looks like it's going to be Yukon.

[kymerc]

Moser are good to go, but when I put them in my mustang cobra they had to be milled down. Too long. Many launches at 5700 with 9 inch slicks and no problems. If you are going drag racing and replace the c clip eliminators be prepaired for some leakage from the rear end.

[Motorhead350]

Yukon setup checking in.

Worth every penny!

[2,4shofast]

I had a Moser fail with 3200 miles, could have been a bad bearing but Im not a believer... But they were difficult to deal with on the issue so I would not recommend them.

[JBeezy]

I have Alloy 31 spline in my Mustang. Very happy with them. Launch them behind the 5 speed 347 and they held up without issues. They have a 10 year limited warranty too. It's a street strip car. I drive it to the track as well

http://m.summitracing.com/parts/aly-12181



Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)