Tubing Size for a P1SC

[BigCars4Ever]

The P1SC has a 3.75" inlet and a 3" outlet. I haven't found 3.75" pipe anywhere so 4" with a reduction spacer is the obvious answer for the inlet. Is there any problem with using 3" tubing for the outlet all the way up to the throttle body? What did the FIT kit come with?

[1stMerc]

Believe that intake pipe for the head unit was make by F.I.T. The silicone sleeve/elbow you may be able to get it from ATI Procharger. 3" is from outlet to TB with requisite silicone sleeves.
Someone had in they're signature, they could get the pipes. Did a search on some of the one's i thought it would be, but must have recently removed it. Maybe they will see this.

[Blk Mamba]

Spectre usually has anything you need to do intake pipping, you will have to look a little on their website though.

[RubberCtyRauder]

Some of spectre couplers are not rated for supercharged applications..You need silicone, not pvc or epdm. Motown knows a place to get all sorts of supercharger couplers clamps etc...I can't remember it at the moment. I'll post it up if/when I remember or hopefully he'll see this

This might be the place that motown knows

http://www.treadstoneperformance.com/view.phtml?f_cat=silicone+hose

here is another I randomly searched

http://www.siliconeintakes.com/product_info.php?products_id=6 22

[jwibbity]

i believe it was landy... he had "pm me for custom air to air pipes"

:confused: :confused: :confused:

[Comin' in Hot]

i believe it was landy... he had "pm me for custom air to air pipes"

:confused: :confused: :confused:

I'll confirm that lol

[1stMerc]

BC4E, one other thing. With judicious placement of piping you will not need to use all of the tubing shown in the manual.

[MOTOWN]

The P1SC has a 3.75" inlet and a 3" outlet. I haven't found 3.75" pipe anywhere so 4" with a reduction spacer is the obvious answer for the inlet. Is there any problem with using 3" tubing for the outlet all the way up to the throttle body? What did the FIT kit come with?

3" stainless steel is what I used , and will be fine, as mentioned Treadstone and frozen boost has anything you need.

[BigCars4Ever]

Thanks! I was going to use aluminum tubing. Gives me more opportunity to use the tig welder :D

[MMBLUE]

I'll confirm that lol

I'll double that one a see you a :confused: