View Full Version : Acufab 60mm TB - direct bolt on for dummies?
chief455
02-01-2014, 02:31 PM
made for Mustangs - any fabrication needed to install on MM?
I pay for labor, need to know what I'd be getting into.
thanks!
You will pay a few hundred bucks and it will do absolutely nothing for performance.
fastblackmerc
02-01-2014, 02:45 PM
You'll get a little better throttle response..... That's about it.
chief455
02-01-2014, 04:18 PM
thank you, I'll skip that mod :beer:
MOTOWN
02-01-2014, 04:21 PM
made for Mustangs - any fabrication needed to install on MM?
I pay for labor, need to know what I'd be getting into.
thanks!
In order to take advantage of the Accufab TB the engine needs to breathe deeper (Forced induction, Cams):burnout:
chief455
02-01-2014, 04:23 PM
In order to take advantage of the Accufab TB the engine needs to breathe deeper (Forced induction, Cams):burnout:
Makes sense.....;)
jimlam56
02-01-2014, 04:41 PM
You'll get a little better throttle response..... That's about it.
Or it will stick WOT like Landy's and wreck his car...
chief455
02-01-2014, 04:44 PM
Or it will stick WOT like Landy's and wreck his car... Oh, don't bring that up :(
champ1173
02-01-2014, 04:52 PM
This is good information to have. I saw a few other members running an Accufab TB, an thought about getting one to. I thought there would be a huge difference, but I guess not. Thanks for letting me know, before I forked out the money for one.
Mr. Man
02-01-2014, 04:54 PM
Adds bling
Jeffonebuck
02-01-2014, 05:08 PM
Or it will stick WOT like Landy's and wreck his car...
Landy melted his into a paperweight for his desk !
Sent from my Tapatalk using Morris Code
RacerX
02-01-2014, 08:28 PM
If you can get a vacuum gauge hooked up ahead of the TB, you'll see that at WOT, you will have zero vacuum on an NA Marauder. This shows no restrictions as far as TB.
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.