View Full Version : JLT Oil Separator
Merrill
02-17-2014, 10:55 PM
Been looking at this. Anyone used one.
Any input welcome.
boatmangc
02-18-2014, 05:38 AM
I have one as well as the prefilter.
I bought the one for the gt500, then did my own plumbing, it looks like it belongs there, I installed it after pulling the blower for porting and found everything past the PVC return had a light coat of baked on oil on it.
I only drive 3000 miles or so per year and on my annual oil changes it has accumulated about a tablespoon of oil or so.
JBeezy
02-18-2014, 05:45 AM
I use one since I installed the Procharger and depending on how I drive, it accumulates a good bit of oil. Money well spent IMO
Sent from my iPhone using Tapatalk
whitey
02-18-2014, 07:22 AM
I built my own. I have a thread showing all thats needed, although its not any cheaper, i guarantee mine works the best and have proof to show it.
fastblackmerc
02-18-2014, 07:39 AM
If your talking about the more expensive one, it's worth it. I installed a 42draft Design one and it works great. Stay away from the cheap compressor / moisture types, you'll just be wasting your money.
I'd also be leary of any one who claims theirs is the best........
BTW.... most of the ones on eBay are crap.
ctrlraven
02-18-2014, 07:42 AM
Many people on the SVT forum use the JLT one and are very happy with it. I will most likely be using a JLT unit after my new motor goes in.
guspech750
02-18-2014, 08:23 AM
I bought my JLT a few years back for my Eaton swap. Wish it were a little bigger (Thats what she said ;) ) But it works. I'm going to make new steel lines for it soon.
http://img.tapatalk.com/d/14/02/18/3ybypuja.jpg
http://img.tapatalk.com/d/14/02/18/atu6usy3.jpg
Sent from The White House on taxpayers dimes.
DTR + 4.10's + Eaton swap = Wreeeeeeeeeeeeeeedom
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.