PDA

View Full Version : Speedometer cluster access



82dawgcrazy
03-23-2014, 01:19 PM
I need to access my speedometer cluster.

I have removed the trim and removed 6 screws from under the trim and the 2 screws above the cluster. The cover, however, is not wanting to come off (resistance) so as to allow access to the cluster. Have I missed removing any fasteners? Or do I need to apply more force to remove? The area around the air vents seem to offer the greatest resistance. :mad2:

Any thoughts would be greatly appreciated. Thanks.

jwibbity
03-23-2014, 02:38 PM
the radio has to slide out with the trim piece that has the vents....

fastblackmerc
03-23-2014, 06:05 PM
If the stock radio is in place it must be removed. If there is an aftermarket radio it will come out with the trim piece.

You did remove the center trim on both sides of the steering column, because there are screws under it.

RacerX
03-23-2014, 07:29 PM
These may help:

82dawgcrazy
03-24-2014, 06:46 PM
If the stock radio is in place it must be removed. If there is an aftermarket radio it will come out with the trim piece.

You did remove the center trim on both sides of the steering column, because there are screws under it.

Yes, I removed the center trim on both side of steering column. It is an aftermarket head unit. I just didn't want to force anything and risk breakage. Thanks

82dawgcrazy
03-24-2014, 06:46 PM
These may help:

Many thanks RacerX.