PDA

View Full Version : maf


mw2309
03-23-2014, 07:30 PM
Looking at getting sct maf for my eaton swap just wondering what one to get ba2600 or ba3000 thx Kevin
RacerX
03-23-2014, 07:41 PM
For most Eaton swaps, the 2600 is fine. If you're going 500+, 3000. This has some info on MAFs:
http://www.fordracingparts.com/download/tipsPDF/ProperlySelectingEFIComp.pdf
JohnE
03-25-2014, 08:14 AM
You will not outflow as how BA2600 with a Eaton M112 blower. Going bigger doesn't help, it costs on accuracy.


John
martyo
03-25-2014, 08:40 AM
Use a Lightning meter. Great tunability.
RacerX
03-25-2014, 09:28 AM
You will not outflow as how BA2600 with a Eaton M112 blower. Going bigger doesn't help, it costs on accuracy.


John
I did... Had to use a 2800. Yeah, I know, I did find some others out there that had the same issue though. Even with a 2800, my MAF counts are in the high 800 range. :beer:


Use a Lightning meter. Great tunability.
Yup! If you don't need bigger, don't go bigger. If you stay within the range of what you'll actually be using for airflow, the resolution of the tune will be better.
mw2309
03-25-2014, 02:45 PM
What about slot style maf
JoeBoomz
03-25-2014, 03:07 PM
What about slot style maf

I just put in a ba5000. I had to change the MAF harness and had to modify the intake tube to mount it.

It's a bit more work - I might recommend it if you have a snail-style blower, but if you're running a roots, just use a BA2600-3000 and call it done.