M122 plate kit introduction

[Jokerzl]

What you will get

1.m122 (can supply your own)
2. Joker port
3. Kit to fit the m122 or any gt500 variant blower.
4. The plate kit from cobra engineering
5.machine work for the gt500 to fit the plate kit.


$1500 gets you everything listed above

Your own blower may be bought and we will reduce the cost of the kit.

The discounts are added to save you as much money as possible.

Extras if you choose

$140- 90 degree roush elbow +$100 ported ( highly recommend)

$300 -dragon throttle body

If you choose an iac valve mounted on the elbow will an extra as well.

Lightning with this kit just put down 545 and 615 with 93 pump gas and 14 degrees of timing. Just imagine what it can do on a 4 valve.
I believe this blower can do 600-700 on race gas boost and some fine tuning.

If you have done the cobra swap done this is an easy mod to do for you.

Start a list of people interested



Sent from my iPhone using Tapatalk

[fireandice9008]

Just to be clear, these are driver side intake, right?

[Zack]

Why are you introducing a kit before Bill has even verified that it will work?
Seems odd.

[clintons4]

Why are you introducing a kit before Bill has even verified that it will work?
Seems odd.

Anything can be made to work...just takes a bunch of money or you need to get a bigger hammer! :lol:

[ctrlraven]

Anything can be made to work...just takes a bunch of money or you need to get a bigger hammer! :lol:
Or BOTH! :banana:

[Jokerzl]

Just to be clear, these are driver side intake, right?


Correct


Sent from my iPhone using Tapatalk

[Jokerzl]

Why are you introducing a kit before Bill has even verified that it will work?
Seems odd.


It has been done on a marauder just he is not a member on the forums

I will be getting pics


Sent from my iPhone using Tapatalk

[Jokerzl]

Bill is going to be doing some testing for small things such as egr and other things


Sent from my iPhone using Tapatalk

[Jokerzl]

Also another point is to see the interest in this . Not going to collect your money and make you wait. I want to make sure there is a market before we do an affordable kit. If not we will do ones offs for every kit.


Sent from my iPhone using Tapatalk

[MOTOWN]

It has been done on a marauder just he is not a member on the forums

I will be getting pics


Sent from my iPhone using Tapatalk

Looking forward to seeing this progress

[Comin' in Hot]

very excited about this

[chief455]

I'll be watching for now, Cobra Eaton and pass side intake swap is breaking the bank now. After a worthy short block is acquired, this blower kit could be interesting......

[fireandice9008]

Correct


Sent from my iPhone using Tapatalk

Excellent. I'm definitely interested, especially since I can keep the d/s intake.

I need to verify how good my engine build was and I may be doing this, especially if they put down numbers comparable to a KB or Whipple.

[Guittard22]

I'll be watching for now, Cobra Eaton and pass side intake swap is breaking the bank now. After a worthy short block is acquired, this blower kit could be interesting......



Was your car at mo's ?

[sflrainmaker01]

Interested.....