PDA

View Full Version : rain guard help



03-300a
04-29-2014, 06:28 PM
Took the rain guards off my mercury marauder but left the 3m tape on crome on door any idea how I can get it off thanks

fastblackmerc
04-29-2014, 06:42 PM
Took the rain guards off my mercury marauder but left the 3m tape on crome on door any idea how I can get it off thanks

Goof Off, rubbing alcohol or tar remover will get it off.

lji372
04-29-2014, 06:43 PM
Took the rain guards off my mercury marauder but left the 3m tape on crome on door any idea how I can get it off thanks

Gasoline FTMFW!!!!

03-300a
04-29-2014, 06:47 PM
Thanks will do right now

EMAS
04-29-2014, 09:45 PM
No chemicals are usually required you can often just roll it off with your fingers.

whitey
04-30-2014, 02:34 PM
Hair/blow drier or a heat gun.

460mudsports
05-09-2014, 07:41 PM
I haven't tried it on 3M tape or similar, but a trick my mother told me about for most sticky residues:
just put some cooking oil on it and let it sit for a while -- ie rub some on it or put some on a piece of paper towel and stick that to the residue. The oil will dissolve the sticky and it will basically just wipe off. Then you just use a little soap and water to clean off the oil. If you don't wait long enough, it just takes a bit of rubbing the oil in to get the residue to come off.
I have been using this trick to remove the sticky residue from lots of stuff, most recently I used some canola cooking oil spray to get the "official licensed product" sticker residue off the bottom of some Tervis Tumblers.

Jeronimojc
05-12-2014, 12:34 PM
No chemicals are usually required you can often just roll it off with your fingers.


^^+1


Sent from my iPhone using Tapatalk