help removing air ride compressor

[cer0413]

Can anyone share some tips on how to remove the air ride compressor? what tools will I need? and arnott or suncore?

[RF Overlord]

Three nuts from inside the wheel well. I forget the size...10mm maybe.

Arnott.

[fastblackmerc]

There was a write up on how to repair the pump. You also want to add drainage holes to the box the pump sit in.

[whitey]

What RF said, and when you need to remove the air line, push red(i think) ring towards the compressor as you pull the black air line.

[vkirkend]

See Attached file....
and I purchased Arnott compressor, only difference is hose bushing in case housing is missing.

[cer0413]

You guys are great

[71cyclone]

There was a write up on how to repair the pump. You also want to add drainage holes to the box the pump sit in.
Yes you do ,/ My aluminum housing has corrosion on the flat sides,
had to seal up with epoxy until I find another pump.-also 11mm on the nutZ and to remove the 1/4'' air line, hold line and push in red sleeve and hold sleeve in and pull line out.:burnout:

[BLACKMARAUDER04]

Why do you have to replace the fuse?
Do you use the same Amp?

[cer0413]

Yes you do ,/ My aluminum housing has corrosion on the flat sides,
had to seal up with epoxy until I find another pump.-also 11mm on the nutZ and to remove the 1/4'' air line, hold line and push in red sleeve and hold sleeve in and pull line out.:burnout:
found it and thanks