View Full Version : pics of dropped Marauders
jwernatl
06-10-2014, 02:18 PM
Hello everyone, would you guys that have dropped your Marauders post some before and after pics? Or maybe if there are some posted would you kindly direct me there?
Mucho Thanks -John
justbob
06-10-2014, 03:42 PM
http://img.tapatalk.com/d/14/06/11/ty8unyby.jpg
http://img.tapatalk.com/d/14/06/11/y8e6e4a3.jpg
http://img.tapatalk.com/d/14/06/11/8yqynyta.jpg
http://img.tapatalk.com/d/14/06/11/hebuba4a.jpg
Self proclaimed Builder Of Badassery.
Buy it, Break it, Build it BETTER.
"Since 2004"
CWright
06-10-2014, 03:49 PM
http://img.tapatalk.com/d/14/06/11/hebuba4a.jpg
Self proclaimed Builder Of Badassery.
Buy it, Break it, Build it BETTER.
"Since 2004"
That's a sharp looking dude in the red shirt!!! :D
justbob
06-10-2014, 04:17 PM
That's why I saved it!
Self proclaimed Builder Of Badassery.
Buy it, Break it, Build it BETTER.
"Since 2004"
Marauderman
06-11-2014, 11:34 AM
That's a sharp looking dude in the red shirt!!! :D
Yeah--believes he works on that highway construction crew and stop over to see what was going on---
BAD MERC
06-11-2014, 12:02 PM
This a 1.75" front / 1" rear drop achieved by cutting one full coil off front springs (top coil) and sliding the rear ride-height sensor over a tad in the back. The front can be jouncy but I always baby it over bumps anyway. The alignment is out of spec and eats the inside of front tires prematurely. I like the stance and achieved the look I wanted for a small price.
Comin' in Hot
06-11-2014, 12:19 PM
My first marauder with Eibachs
http://i22.photobucket.com/albums/b335/Witman40/7416010.jpg (http://s22.photobucket.com/user/Witman40/media/7416010.jpg.html)
My second marauder with Naake QA1s
http://i22.photobucket.com/albums/b335/Witman40/aac122a1.jpg (http://s22.photobucket.com/user/Witman40/media/aac122a1.jpg.html)
Then with Eibachs http://i22.photobucket.com/albums/b335/Witman40/Marauders/IMG_6448_zpsf3b801b9.jpg (http://s22.photobucket.com/user/Witman40/media/Marauders/IMG_6448_zpsf3b801b9.jpg.html)
clmrt
06-11-2014, 01:07 PM
http://www.mercurymarauder.net/forums/showthread.php?t=92593
Vostok
06-11-2014, 03:56 PM
Just dropped mine a couple weeks ago. -1 coil.
Anyone in the area looking to have theirs done please PM me.
http://img.tapatalk.com/d/14/06/12/atuzazyb.jpg
http://img.tapatalk.com/d/14/06/12/te8u3uza.jpg
http://img.tapatalk.com/d/14/06/12/9ynuqedy.jpg
stevengerard
06-16-2014, 08:21 AM
http://www.mercurymarauder.net/forums/attachment.php?attachmentid=38 688&stc=1&d=1402932040
FW_Linc/Merc
06-16-2014, 09:00 AM
http://www.mercurymarauder.net/forums/showthread.php?t=72623
slickster
06-16-2014, 09:50 AM
My first marauder with Eibachs
http://i22.photobucket.com/albums/b335/Witman40/7416010.jpg (http://s22.photobucket.com/user/Witman40/media/7416010.jpg.html)
My second marauder with Naake QA1s
http://i22.photobucket.com/albums/b335/Witman40/aac122a1.jpg (http://s22.photobucket.com/user/Witman40/media/aac122a1.jpg.html)
Then with Eibachs http://i22.photobucket.com/albums/b335/Witman40/Marauders/IMG_6448_zpsf3b801b9.jpg (http://s22.photobucket.com/user/Witman40/media/Marauders/IMG_6448_zpsf3b801b9.jpg.html)
what size rear tire is on the blue
Comin' in Hot
06-16-2014, 09:53 AM
what size rear tire is on the blue
295/45r18s on widened wheels
Embassy
06-16-2014, 10:57 AM
1 coil cut and rear air ride adjusted accordingly:
http://www.supermotors.net/getfile/766661/fullsize/img_7464.jpg
http://www.supermotors.net/getfile/766662/fullsize/img_7466.jpg
http://www.supermotors.net/getfile/766666/fullsize/img_7469.jpg
2,4shofast
06-16-2014, 10:57 AM
Before and after, cut one full coil and adjusted the rear.
http://img.photobucket.com/albums/v259/shofast/MM/DSC00954.jpg (http://smg.photobucket.com/user/shofast/media/MM/DSC00954.jpg.html)
http://img.photobucket.com/albums/v259/shofast/MM/Marauders390of447.jpg (http://smg.photobucket.com/user/shofast/media/MM/Marauders390of447.jpg.html)
http://img.photobucket.com/albums/v259/shofast/MM/3-1.jpg (http://smg.photobucket.com/user/shofast/media/MM/3-1.jpg.html)
champ1173
06-16-2014, 05:05 PM
Just dropped mine a couple weeks ago. -1 coil.
Anyone in the area looking to have theirs done please PM me.
http://img.tapatalk.com/d/14/06/12/atuzazyb.jpg
http://img.tapatalk.com/d/14/06/12/te8u3uza.jpg
http://img.tapatalk.com/d/14/06/12/9ynuqedy.jpg
I just might do that.
Logizyme
06-24-2014, 11:18 PM
marauder with Eibachs
I didnt know that Eibachs made anything for our cars, their website does not have a listing.
EDIT: Nevermind, did my research and found them discontinued.
Limited360
06-25-2014, 03:11 AM
Lowered on NAAKE coil overs, stock air bags on QA1 shocks in rear.
http://img.tapatalk.com/d/14/06/25/guzune9a.jpg
http://img.tapatalk.com/d/14/06/25/ty8yqa8e.jpghttp://img.tapatalk.com/d/14/06/25/u4yha3aq.jpgsorry for low quality. Can get higher resolution later if required... Saved and posted from my phone...
Sent from my iPhone using Tapatalk so I may sound retarded.
clmrt
06-25-2014, 09:12 AM
Where'd you get your QA1 rears? Model #? Like the ride?
Limited360
06-25-2014, 11:11 AM
Came with car...I do like the ride actually... it is stiff from being so low, and I do have the shocks adjusted on the firm side
jus4kix03MM
07-15-2014, 08:47 PM
Eibach springs in front. On 20 inch Foose wheels and on stock wheels.
guspech750
07-15-2014, 08:51 PM
Eibach springs in front. On 20 inch Foose wheels and on stock wheels.
Looks bad ass!!
Sent from The White House on taxpayers dimes.
DTR + 4.10's + Eaton swap = Wreeeeeeeeeeeeeeedom
Cybertrucker
07-24-2014, 01:02 PM
Eaton drop springs in the front 1.5in and adj the rear.
martyo
07-24-2014, 01:14 PM
Eaton drop springs
Eaton or Eibach?
slickster
07-24-2014, 06:44 PM
Lowered on NAAKE coil overs, stock air bags on QA1 shocks in rear.
http://img.tapatalk.com/d/14/06/25/guzune9a.jpg
http://img.tapatalk.com/d/14/06/25/ty8yqa8e.jpghttp://img.tapatalk.com/d/14/06/25/u4yha3aq.jpgsorry for low quality. Can get higher resolution later if required... Saved and posted from my phone...
Sent from my iPhone using Tapatalk so I may sound retarded.. What size front tires?
Limited360
07-24-2014, 06:48 PM
Stock.
Sent from my iPhone using Tapatalk so I may sound retarded.
bassliner
07-24-2014, 07:43 PM
Not a MM, but I do have the Naake QA1s on there. Gotta love adjustable ride height!
http://www.lowtechglobal.com/images/hostedphotos/cv5.jpg
The rear air is a little bit jacked up thanks to compensating for 100lbs of tools in the trunk. Normally sits about 3/4" lower.
Limited360
07-24-2014, 08:43 PM
I'd like to go lower. Need to get my damn camber bolts on the car already...
Sent from my iPhone using Tapatalk so I may sound retarded.
lifespeed
07-25-2014, 04:08 PM
http://img.tapatalk.com/d/14/06/12/9ynuqedy.jpg
"It's like, how much more black could this be? And the answer is none. None more black."
ts-pa
07-28-2014, 03:08 PM
"It's like, how much more black could this be? And the answer is none. None more black."
I can still see a chrome plated grille badge, chrome plated wheel center caps, chrome plated lugnuts and red calipers ;)
Vostok
07-28-2014, 06:49 PM
"It's like, how much more black could this be? And the answer is none. None more black."
I can still see a chrome plated grille badge, chrome plated wheel center caps, chrome plated lugnuts and red calipers ;)
:D
I'm actually going to go darker...
Going to go with badge less grill, 5% in the front windows...
Center caps, lug nuts, and calipers will probably stay.
jwibbity
07-28-2014, 06:53 PM
:D
I'm actually going to go darker...
Going to go with badge less grill, 5% in the front windows...
Center caps, lug nuts, and calipers will probably stay.
Its looks pretty sick the way it is, the contrast of the "chrome" on the wheels and grill really bring out the black more :beer:
you know what they say, once you go black........
lifespeed
07-28-2014, 08:57 PM
I can still see a chrome plated grille badge, chrome plated wheel center caps, chrome plated lugnuts and red calipers ;)
Way to wreck a good Spinal Tap quote . . .
ts-pa
07-29-2014, 02:28 AM
Way to wreck a good Spinal Tap quote . . .
Sorry, I never seen that movie.
ts-pa
07-29-2014, 02:31 AM
Back on topic of the thread of lowered MM...Does anyone have the tool for the cam bolts that they are interested in selling?
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.