Help in NJ

[crownvic05]

I was going to do this my self but dont really feel comftable doing so.

I have a set a steeda under drives that I need to install. Alternator pully wont be used so only 2 out of the 3.

Any one near by NJ around Hudson county, bergen county or maybe esle where thats close by willing to install them for me?

Willing to pay a price for labor. Let me know if interested and tell me your price.

[martyo]

I am in Georgia but I can help you with it.

Don't bother doing them. They are just not worth it.

That is the best help anyone can give with them.

[fastblackmerc]

They are actually pretty easy to do.

Need a helper to stop the flywheel from turning.

Need to borrow a crankshaft puller from a FLAPS.

Need some silicone sealer.

[crownvic05]

They are actually pretty easy to do.

Need a helper to stop the flywheel from turning.

Need to borrow a crankshaft puller from a FLAPS.

Need some silicone sealer.

How do you stop the flywheel from turning?

[crownvic05]

I am in Georgia but I can help you with it.

Don't bother doing them. They are just not worth it.

That is the best help anyone can give with them.

Thanks for your advice. I bought these used from a marauder member. They still look brand new though. I got them for a great deal. I will be installing them because my pullys are very rusty and ugly. Ive herd few members saying they didnt see no improvement while lots others did. If my pullys didnt look so ugly and extreamly old, I would had not messed with this. But, I have them so on they are going.

[fastblackmerc]

How do you stop the flywheel from turning?

After jacking the car up and properly supporting it. Remove the inspection cover from the bottom of the transmission bell housing. Have your helper wedge a large pry bar, screwdriver or block of wood in between a tooth on the flywheel and the bell housing to stop the flywheel from turning.

[martyo]

Thanks for your advice. I bought these used from a marauder member. They still look brand new though. I got them for a great deal. I will be installing them because my pullys are very rusty and ugly. Ive herd few members saying they didnt see no improvement while lots others did. If my pullys didnt look so ugly and extreamly old, I would had not messed with this. But, I have them so on they are going.

Sounds good.

Keep an eye on charging at idle.

[Jeffonebuck]

How do you stop the flywheel from turning?

Here is one way, wrap the belt on the crank and let it overlap and the wind it clockwise, to install just do it opposite. Dont forget to put some black silicone http://img.tapatalk.com/d/14/06/20/uretu9un.jpgin the crank key way when re installing


Sent from my iPad using Tapatalk

[crownvic05]

I wish my stock crank pulley looked like that one.

[mtenderenda]

I'm from new jersey over in the bergen county area, I installed it and had to take mine back off, because of my supercharger :banana2:
It's really not really that hard to install. Only thing that can be a pain in the ass is to take off the stock harmonice balancer

[crownvic05]

I'm from new jersey over in the bergen county area, I installed it and had to take mine back off, because of my supercharger :banana2:
It's really not really that hard to install. Only thing that can be a pain in the ass is to take off the stock harmonice balancer

What to do mine?

by the way, I have a 05 crown vic.

[crownvic05]

So I woke up early, went to autozone and rented a crank pully puller and silicon. Got home and started working on it. Removed wated pump pulley then crank. By the way, I had to remove the fan to gain access and it was more comftable anyways. Installed everything and here we go.

Old
http://i457.photobucket.com/albums/qq295/isatisfy2003/Mobile%20Uploads/IMG_20140621_121843_zps377ce50 2.jpg (http://s457.photobucket.com/user/isatisfy2003/media/Mobile%20Uploads/IMG_20140621_121843_zps377ce50 2.jpg.html)

New
http://i457.photobucket.com/albums/qq295/isatisfy2003/Mobile%20Uploads/IMG_20140621_163224_zpsa45f8c5 4.jpg (http://s457.photobucket.com/user/isatisfy2003/media/Mobile%20Uploads/IMG_20140621_163224_zpsa45f8c5 4.jpg.html)

And then gave the engine a quick bath
http://i457.photobucket.com/albums/qq295/isatisfy2003/Mobile%20Uploads/IMG_20140621_164005_zps5a87bf1 e.jpg (http://s457.photobucket.com/user/isatisfy2003/media/Mobile%20Uploads/IMG_20140621_164005_zps5a87bf1 e.jpg.html)