Big Brakes on a not-so-big Budget? YEP

[MOTOWN]

Looks sweet! anything is better than stock!

[Bad_S55]

Quick pic as I test fit the wheel. I likey. Tight fit but perfect.

http://tapatalk.imageshack.com/v2/15/02/26/a74463a19b8138c76bccc81a13246e 7e.jpg

Looks great! What brand rotors did you go with?

[JBeezy]

Callahan. Thanks!

http://pages.ebay.com/link/?nav=item.view&id=301378688618&alt=web

[JBeezy]

Brakes are done. I must say they stop with less effort, pedal is hard, and I'm happy. The look speaks for itself. Fills the stock wheel up. Shout out to the Zack, LJI372, and TCE. Thanks again for everyone's help.

[therealrogers]

Idk how many have signed up for another run of the brackets, but I would like to add my name to the list.


Sent from my iPad using Tapatalk

[Bad_S55]

Idk how many have signed up for another run of the brackets, but I would like to add my name to the list.


Sent from my iPad using Tapatalk

Jerry said he might do another run over summer. I'm down for 2, my uncle for a set, & you makes 4 sets. There might be more, I'm not sure. Let's get some more interest generated!!

[lji372]

Quick pic as I test fit the wheel. I likey. Tight fit but perfect.

http://tapatalk.imageshack.com/v2/15/02/26/a74463a19b8138c76bccc81a13246e 7e.jpg

Centercap is upside down :shake:

4ixns1v71oQ

[O's Fan Rich]

If there is another run on brackets, or a group buy organized, make sure I'm included.
I'm in like Flynn!

[justbob]

After this pic I'm think I'm sold.
http://tapatalk.imageshack.com/v2/15/02/28/67f14afbc91d6510082593e05af463 4c.jpg


Builder Of Badassery

[Bad_S55]

5 people now, 6 sets!

[JBeezy]

Justbob, I got excited as soon as I trial fit the wheel. I think it's perfect, especially with stock wheels. I hate to see larger wheels with small brakes/rotors. Over 1/2 the cost too.

[Sully008]

Looks great! I can't wait until spring gets here to do my brakes.

[Krytin]

5 people now, 6 sets!

Make it 7 - I'll take a set.

[JBeezy]

If only there was a back brake mod of this type. They look so simple compared to the front now...

[Zack]

The rears are far more difficult than the fronts

[Ari]

I'll take a set also, looking at the post 2 above me, that's 8 sets.

[Thenwhat85]

Now it's 9

[JBeezy]

Had to add this. What a difference!!!!!

http://tapatalk.imageshack.com/v2/15/03/03/92c5a822ba987e328e3a8e5f76492e 9b.jpg

These smart members here keep helping us make these great cars the way they should have come from the factory.

[Thenwhat85]

Yup definitely let me know if your making the brackets. I already got the calipers lined up just dont want to pull the trigger if I can't get the brackets. Thanks

[Comin' in Hot]

I'll get a set of brackets too for my DD if it gets these made again.

[rauder88]

I'm in for a set too. Was leery at first. But wow, looks good! Whats that make it now 12 sets.

[Bad_S55]

C'mon Jerry, you've got a whole mess of people who want these brackets from you now!!

[JBeezy]

He's just playing hard to get. Be patient, I think...

[Thenwhat85]

I would think rear brakes would be easy. I mean it's a ford 8.8 what mustang or I performance ford doesn't have one. I don't know but couldn't you just swap caliper brackets and every thing should bolt on.

[camelgrundle]

I would be in for a set! 13 now

[lji372]

My anal OCD'd arse is still waiting on some rears! :)
qztuEucrNBc

Self proclaimed Builder Of Badassery.

Buy it, Break it, Build it BETTER.
"Since 2004"
Just saw this

Hmmmmmmmm

[justbob]

I would think rear brakes would be easy. I mean it's a ford 8.8 what mustang or I performance ford doesn't have one. I don't know but couldn't you just swap caliper brackets and every thing should bolt on.


The problem I see is who is out the time and money for junkyard parts from various applications just for trial and error?


Builder Of Badassery

[Green96]

I would think rear brakes would be easy. I mean it's a ford 8.8 what mustang or I performance ford doesn't have one. I don't know but couldn't you just swap caliper brackets and every thing should bolt on.


I have not done any real checking, but I think that the issue is probably the emergency brake setup.

[lji372]

I have not done any real checking, but I think that the issue is probably the emergency brake setup.


Get rid of the shoes and get a caliper with an integrated parking brake.


Don't think I've seen this, but it's an option I suppose.

[Thenwhat85]

Looks like I'll have to spend a day at pull a part checking this rear brake deal out. I really think this can be done fairly simple. I wonder if the axles stick out further or closer from the housing flange on different models\years.

So many projects so little money.

[Zack]

I would think rear brakes would be easy. I mean it's a ford 8.8 what mustang or I performance ford doesn't have one. I don't know but couldn't you just swap caliper brackets and every thing should bolt on.

You have no idea about anything. And I read you are doing a turbo build?
Good luck sir!

[lifespeed]

Looks like I'll have to spend a day at pull a part checking this rear brake deal out. I really think this can be done fairly simple. I wonder if the axles stick out further or closer from the housing flange on different models\years.

So many projects so little money.

Although it may appear a simple concept, the implementation is not as easy as you think. There are a lot of parts to line up.

Go ahead and design and build a kit, your work may be appreciated. Be warned we are a tough audience, and the heavy Marauder is hard on brakes. Any weakness will be set upon mercilessly.

[Thenwhat85]

You have no idea about anything. And I read you are doing a turbo build?
Good luck sir!

That was a Dick move. Tough audience or not no need to cut someone down. I'm not the most knowledge person but I research before doing anything. Saying I don't know anything isn't cool in my book you dont know me. but hey thanks for your support

[Zack]

Looks like I'll have to spend a day at pull a part checking this rear brake deal out. I really think this can be done fairly simple. I wonder if the axles stick out further or closer from the housing flange on different models\years.

So many projects so little money.


That was a Dick move. Tough audience or not no need to cut someone down. I'm not the most knowledge person but I research before doing anything. Saying I don't know anything isn't cool in my book you dont know me. but hey thanks for your support

Now you are contradicting your original statement.

As the guy above said, if you come up with something, it will be much appreciated.

[rauder88]

That was a Dick move. Tough audience or not no need to cut someone down. I'm not the most knowledge person but I research before doing anything. Saying I don't know anything isn't cool in my book you dont know me. but hey thanks for your support

Zack has a point though. And, if there was some easy bolt on swap I'm sure it would have been discovered long before now. Would be great to see an option for the rear though, if you find something please share.

[therealrogers]

I really appreciate the work Zack and Jerry did on the fronts. And I would appreciate any significant work done to figure a cost effective solution for the rears. I don't have the time or know-how to design these things from scratch and I'm thankful for those of you who do the work.

For the time being, I'd just love to pay for some brackets. Everybody chant with me: JER-REE! JER-REE! JER-REE! JER-REE! JER-REE! JER-REE!


Sent from my iPad using Tapatalk

[JBeezy]

I really appreciate the work Zack and Jerry did on the fronts. And I would appreciate any significant work done to figure a cost effective solution for the rears. I don't have the time or know-how to design these things from scratch and I'm thankful for those of you who do the work.

For the time being, I'd just love to pay for some brackets. Everybody chant with me: JER-REE! JER-REE! JER-REE! JER-REE! JER-REE! JER-REE!


Sent from my iPad using Tapatalk
Chanting with you as well even though I have my brakes complete. I love walking in my shop and seeing the big rotors filling up the wheel. I haven't driven my car since I completed the install and test drove it. Just awesome to look at

[Zack]

I really appreciate the work Zack and Jerry did on the fronts. And I would appreciate any significant work done to figure a cost effective solution for the rears. I don't have the time or know-how to design these things from scratch and I'm thankful for those of you who do the work.

For the time being, I'd just love to pay for some brackets. Everybody chant with me: JER-REE! JER-REE! JER-REE! JER-REE! JER-REE! JER-REE!


Sent from my iPad using Tapatalk

This is the rear setup from TCE:

http://i122.photobucket.com/albums/o269/ToddTCE/Marauder/P1010017.jpg (http://s122.photobucket.com/user/ToddTCE/media/Marauder/P1010017.jpg.html)

http://i122.photobucket.com/albums/o269/ToddTCE/Marauder/P1010025.jpg (http://s122.photobucket.com/user/ToddTCE/media/Marauder/P1010025.jpg.html)

There is nothing easy about this...or cheap.

[RUSTY]

http://www.vorshlag.com/product_info.php?cPath=141_142 _280&products_id=606

What about something like this?

[MOTOWN]

There two options for modded rear brake kits on a Marauder , Todds (TCE) kit , or Modify your own kit , Ill go with Todds custom kits every time! sometimes its easier and a smarter choice to break off dead presidents and get a product that has been modified and refined by someone who is the best at custom brake kits.

[BigM460]

This is the rear setup from TCE:

http://i122.photobucket.com/albums/o269/ToddTCE/Marauder/P1010017.jpg (http://s122.photobucket.com/user/ToddTCE/media/Marauder/P1010017.jpg.html)

http://i122.photobucket.com/albums/o269/ToddTCE/Marauder/P1010025.jpg (http://s122.photobucket.com/user/ToddTCE/media/Marauder/P1010025.jpg.html)

There is nothing easy about this...or cheap.

A possible rotor to use is from Nissan/Infinity. The 2011-13 M56 sport possibly others uses a 14" rear rotor with the similar brake shoe emergency brake setup. Nothing that new in any yards here to look at. I bought a set of rotors, but haven't gone any further yet.

[Zack]

If ever I had the motivation to do something for the rear brakes, the emergency brake would be thrown in the garbage. Lots more options with it removed.
I have never used it on any of the 7 Marauders I've owned over 12 years.

[JBeezy]

I just wanted to add that I don't have any pad to rotor overhang. If looked at from an angle it could give that illusion, but the beveled edge of the rotor makes it look that way.

41072

41073

41074

[lji372]

alright folks, you know the drill

prepays only
paypal as gift to:

lji_372@yahoo.com
lji _ 372 @ yahoo.com
^^^ don't forget the _ underscore

also INCLUDE SHIPPING ADDRESS IN THE PAYPAL NOTE please!! (or there will be a two week shipping delay)
there's nothing like getting everything boxed and not having an address

be patient, i will order stock once i get to ten orders. if we don't reach ten i will refund your money :bows:

1
2
3
4
5
6
7
8
9
10

[justbob]

If ever I had the motivation to do something for the rear brakes, the emergency brake would be thrown in the garbage. Lots more options with it removed.
I have never used it on any of the 7 Marauders I've owned over 12 years.


Neither did I. Till two years ago..


Builder Of Badassery

[justbob]

Paid in full. Thanks Bubs.


Builder Of Badassery

[rauder88]

Paid up. Thanks!!

[lji372]

1 justbob
2 rauder88
3
4
5
6
7
8
9
10

[Bad_S55]

Payment sent! Thanks Jerry!

[Comin' in Hot]

Payment sent

[camelgrundle]

Sent and love ya!

[lji372]

1 justbob
2 rauder88
3Bad S55
4Comin' in Hot
5camelgrundle
6
7
8
9
10

[therealrogers]

Thanks, Jerry! Payment sent.

[Bad_S55]

Oh man 4 more!!!

[JBeezy]

Won't b long. It was up to 13 yesterday

[lji372]

1 justbob
2 rauder88
3Bad S55
4Comin' in Hot
5camelgrundle
6therealrogers
7SIZEMOREMK
8
9
10

[SIZEMOREMK]

Hey JBeezy, which calipers did you use? Did you get the ones from advance?

[JBeezy]

Order from RockAuto. Just the calipers, not the rotors. They come with the brackets

41075

[Zack]

Jerry is killing it

[blkZooM]

hell, might as well drop my name in also, will send money tomorrow afternoon

[Thenwhat85]

Need to know how much to pay. Is it still 155?

[lji372]

Need to know how much to pay. Is it still 155?

Yes sir.......

[lji372]

Jerry is killing it

Killing it?

If you mean making money for louisville drinking then yes.

[Thenwhat85]

Sent. Thank you

[lji372]

1 justbob
2 rauder88
3Bad S55
4Comin' in Hot
5camelgrundle
6therealrogers
7SIZEMOREMK
8Thenwhat85
9
10

[rauder88]

2 more! Where is everyone at?

[Jolly Roger]

I'm in.
Please add me to the list,
payment sent.
Thanks.;)

[Bad_S55]

1 MORE!!!!!!!!!!

[lji372]

1 justbob
2 rauder88
3Bad S55
4Comin' in Hot
5camelgrundle
6therealrogers
7SIZEMOREMK
8Thenwhat85
9Jolly Roger
10

[JBeezy]

I almost want to order another set simply because they look so freaking pretty. [emoji7]

[lji372]

1 justbob
2 rauder88
3Bad S55
4Comin' in Hot
5camelgrundle
6therealrogers
7SIZEMOREMK
8Thenwhat85
9Jolly Roger
10yjmud

Heck let's keep going!
11

[Sully008]

Just ordered my calipers from rockauto. Will have to order parts in stages since I don't have any money, lol. Will probably get the rotors next.

[Ari]

Well that escalated quickly. I'm sending money now.

[JBeezy]

Just ordered my calipers from rockauto. Will have to order parts in stages since I don't have any money, lol. Will probably get the rotors next.
Exactly what I did, that's why it took sooo long.

[justbob]

So cool to start ordering stuffs Jerry?


Builder Of Badassery

[Sully008]

Exactly what I did, that's why it took sooo long.

Ordered the same ones you did. Then I looked at the prices for pads and realized they weren't that expensive. Now I'm trying to see if I can add them to my order.

It's taking me so long because, well, it's still winter up here and I won't be able to touch the car until at least mid-April/early May, lol.

[JBeezy]

At one time we had a 5% discount for Rockauto. That may be long gone now

[lji372]

1 justbob
2 rauder88
3Bad S55
4Comin' in Hot
5camelgrundle
6therealrogers
7SIZEMOREMK
8Thenwhat85
9Jolly Roger
10yjmud

Heck let's keep going!
11Ari
12
13
14
15

[lji372]

Stock ordered!

:bows:

[Bad_S55]

Stock ordered!

:bows:

JERRY YOU ARE THE MAN!!!!!:beer:

[blkZooM]

Money has been sent

[lji372]

JERRY YOU ARE THE MAN!!!!!:beer:

It was all zack :bows:

[lji372]

1 justbob
2 rauder88
3Bad S55
4Comin' in Hot
5camelgrundle
6therealrogers
7SIZEMOREMK
8Thenwhat85
9Jolly Roger
10yjmud

Heck let's keep going!
11Ari
12blkZooM
13
14
15

[rauder88]

Awesome! Thanks Jerry and Zack for putting this together.

[Krytin]

Just sent payment -thanks again Jerry for making this second run and answering the email so quick!

[lji372]

1 justbob
2 rauder88
3Bad S55
4Comin' in Hot
5camelgrundle
6therealrogers
7SIZEMOREMK
8Thenwhat85
9Jolly Roger
10yjmud

Heck let's keep going!
11Ari
12blkZooM
13Kryton
14
15

[O's Fan Rich]

1 justbob
2 rauder88
3Bad S55
4Comin' in Hot
5camelgrundle
6therealrogers
7SIZEMOREMK
8Thenwhat85
9Jolly Roger
10yjmud

Heck let's keep going!
11Ari
12blkZooM
13Kryton
14 O's Fan Rich
15

I added me to the list.

[drac]

You guys won't regret these brakes. They look and function absolutely great! I finally got mine on last week.


http://i21.photobucket.com/albums/b299/dracaufreu/IMG_5060_zps90d9bt7f.jpg

[Bad_S55]

What rotors did you use Drac? Looks great!!

[Zack]

Whatever rotors he bought is what I suggest....or the ones I used from NAPA with no holes.
The reason:
Both of these rotors do not have a bevel at the very top, like the Callahans do.

This means the pads will make 100% contact from top to bottom.

If you have the Callahans its no big deal though.

[BeanSS]

As soon as I get my play money in next week im a be in on this

Just bought a Trilogy Super Charged Marauder and I need to address this thing they call "stopping" ?Lol

[Zack]

As soon as I get my play money in next week im a be in on this

Just bought a Trilogy Super Charged Marauder and I need to address this thing they call "stopping" ?Lol

Did you buy the silver one in Chicago?

[JBeezy]

You guys won't regret these brakes. They look and function absolutely great! I finally got mine on last week.


http://i21.photobucket.com/albums/b299/dracaufreu/IMG_5060_zps90d9bt7f.jpg
Post pic of them with the wheel on. Would like to see what the black calipers look like

[Zack]

Post pic of them with the wheel on. Would like to see what the black calipers look like

He has GT500 wheels on a Blue Crown Vic.

[drac]

I got the R1 Concepts "premier" rotors. You can choose your flavor of style (blank, drilled, slotted or drilled/slotted) and the premium ones come with the hats, edges and all internal vanes painted black to help fight against rusting.

[dmjarosz]

Ive been off the forums for the winter. Isabelle is in hibernation and Ive been on the snowmobile forums. With the recent thaw and the sled trails closing, I decided its time to start Maraudering around on the Marauder forums. Needless to say I read all 40 pages of this thread in one sitting and am adding my name to the list!

Its ironic because earlier today I was cringing at the fact I was planning to drop $1500+ on a big brake kit this year.

Originally Posted by lji372 http://mercurymarauder.net/forums/images/buttons/viewpost.gif (http://mercurymarauder.net/forums/showthread.php?p=1436975#post1 436975)
1 justbob
2 rauder88
3Bad S55
4Comin' in Hot
5camelgrundle
6therealrogers
7SIZEMOREMK
8Thenwhat85
9Jolly Roger
10yjmud

Heck let's keep going!
11Ari
12blkZooM
13Kryton
14O's Fan Rich
15 dmjarosz

[lji372]

If I keep selling these I'll be able to get some for myself :woohoo:

[Bob Mathis]

I have not keep up with this up grade. Are there brackets that can be bought? Or do I have to get on the list?

[lji372]

I have not keep up with this up grade. Are there brackets that can be bought? Or do I have to get on the list?

There are a few unspoken for.
I'll try and get the list updated tomorrow

[O's Fan Rich]

There are a few unspoken for.
I'll try and get the list updated tomorrow

Where do I send the $$ ?

[Bob Mathis]

I do want on the list. I am going to due this up grade next. If any one knows where the best places to get calipers from please let me know. I see they are not to bad just when you add the core. I did look at ones for a 2001 Corvette.

[lji372]

alright folks, you know the drill

prepays only $155
paypal as gift to:

lji_372@yahoo.com
lji _ 372 @ yahoo.com
^^^ don't forget the _ underscore
Or mail check to:
Jerry Irwin
21448 mullin ave
Warren mi 48089

also INCLUDE SHIPPING ADDRESS IN THE PAYPAL NOTE please!! (or there will be a two week shipping delay)
there's nothing like getting everything boxed and not having an address

[JBeezy]

I do want on the list. I am going to due this up grade next. If any one knows where the best places to get calipers from please let me know. I see they are not to bad just when you add the core. I did look at ones for a 2001 Corvette.
Rockauto is where I got mine

[Bob Mathis]

Money sent. Let this up grade begin.

[lji372]

Money sent. Let this up grade begin.

You had one job :D

prepays only $155
paypal as gift to:

[lji372]

Is this everyone?

1 justbob
2 rauder88
3Bad S55
4Comin' in Hot
5camelgrundle
6therealrogers
7SIZEMOREMK
8Thenwhat85
9Jolly Roger
10yjmud
11Ari
12blkZooM
13Kryton
14O's Fan Rich
15 dmjarosz
16 Bob Mathis

[eric jones]

Is this everyone?

1 justbob
2 rauder88
3Bad S55
4Comin' in Hot
5camelgrundle
6therealrogers
7SIZEMOREMK
8Thenwhat85
9Jolly Roger
10yjmud
11Ari
12blkZooM
13Kryton
14O's Fan Rich
15 dmjarosz
16 Bob Mathis

No! You forgot me

[lji372]

No! You forgot me

Thx, sorry. You were on the shipping list though :D

Is this everyone?

1 justbob
2 rauder88
3Bad S55
4Comin' in Hot
5camelgrundle
6therealrogers
7SIZEMOREMK
8Thenwhat85
9Jolly Roger
10yjmud
11Ari
12blkZooM
13Kryton
14O's Fan Rich (if you paid shoot me a pm, I didn't see it)
15 dmjarosz
16 Bob Mathis
17 eric jones
18 Chief455

[BeanSS]

Thx, sorry. You were on the shipping list though :D

Is this everyone?

1 justbob
2 rauder88
3Bad S55
4Comin' in Hot
5camelgrundle
6therealrogers
7SIZEMOREMK
8Thenwhat85
9Jolly Roger
10yjmud
11Ari
12blkZooM
13Kryton
14O's Fan Rich (if you paid shoot me a pm, I didn't see it)
15 dmjarosz
16 Bob Mathis
17 eric jones
18 Chief455


If you can hold out till Friday you can add my name to list...if not , I'll catch the next run

[lji372]

I believe there are 4 sets left.

[O's Fan Rich]

I believe there are 4 sets left.

Tis, twas is was sent.

Thank you.

[lji372]

Finished them up today :banana2:

Just got home after a sixteen hour day..:violin: I know who cares :lol:

What you do care about is that with any luck all the bolts will be in tomorrow. Then I can ship these things out:banana2:

[Krytin]

Finished them up today :banana2:

Just got home after a sixteen hour day..:violin: I know who cares :lol:

What you do care about is that with any luck all the bolts will be in tomorrow. Then I can ship these things out:banana2:

Very nice! Sorry about the long day.

[Bob Mathis]

Great, do I need to send my address?

[Sully008]

For those of you still hunting for parts, here's what I'm going with. Everything was bought from rockauto:


Calipers:
Centric 14162127 and 14162128

Rotors:
Centric 12661089SL and 12661089SR slotted only.

Pads:
Bendix D731 CT

Hopefully I'll be able to get to these in the next month or so. Calipers are in, the pads and rotors should be in later this week.

[JBeezy]

For those of you still hunting for parts, here's what I'm going with. Everything was bought from rockauto:


Calipers:
Centric 14162127 and 14162128

Rotors:
Centric 12661089SL and 12661089SR slotted only.

Pads:
Bendix D731 CT

Hopefully I'll be able to get to these in the next month or so. Calipers are in, the pads and rotors should be in later this week.
Not sure if you plan on painting the calipers and caliper brackets or leave as they come, but I'd recommend you paint the caliper bracket or at least clear coat it. I didn't and now I have to go back and paint it. It's starting to rust or discolor should it say

[camelgrundle]

Very nice! Thank you guys again for making this possible.

[Sully008]

Not sure if you plan on painting the calipers and caliper brackets or leave as they come, but I'd recommend you paint the caliper bracket or at least clear coat it. I didn't and now I have to go back and paint it. It's starting to rust or discolor should it say

Yeah, I was planning on painting at least the calipers black. They came in silver which doesn't match my rears. I guess I'll be painting the brackets, too.

[Bad_S55]

My uncle introduced me to a guy who recomended Autozone C-Max pads to me. He had a hot rod Stratus that he built & apparently pushed it so hard messing around with another guy on the freeway, the rotors were glowing orange with zero brake fade.

[Bad_S55]

To those of you who've ordered you calipers from RockAuto, did they have the Corvette script on them?

[Sully008]

To those of you who've ordered you calipers from RockAuto, did they have the Corvette script on them?

The calipers I ordered did not have the script on them.

[therealrogers]

Brackets look good!! Thanks! http://tapatalk.imageshack.com/v2/15/03/23/5517ddc673075e7cf311857299103a 79.jpg


Sent from my iPhone using Tapatalk

[camelgrundle]

Got mine too. Thanks!!!!

[Comin' in Hot]

My brackets came today, thanks!!!!!

[Bad_S55]

Mine came Friday, excellent work! Thanks!!!!

[JBeezy]

Too bad they will not be seen. They sure are pretty.

[Ari]

Also got mine today. I'd post a picture but they look exactly like the ones that were just posted. They feel nice and solid.

When I got the box I was like "what the hell is this?" Because I haven't been keeping up with this thread so I didn't know when they would be sent out haha.

[blkZooM]

Also got mine today thanks again Jerry and Zack

[BeanSS]

alright folks, you know the drill

prepays only $155
paypal as gift to:

lji_372@yahoo.com
lji _ 372 @ yahoo.com
^^^ don't forget the _ underscore
Or mail check to:
Jerry Irwin
21448 mullin ave
Warren mi 48089

also INCLUDE SHIPPING ADDRESS IN THE PAYPAL NOTE please!! (or there will be a two week shipping delay)
there's nothing like getting everything boxed and not having an address

Got any more sets of these? Got my money right!

[lji372]

yes i do

also, there are 6 sets waiting to be shipped. the bolt supplier didn't have enough in stock.
i should have the rest sent out in a day or two.

[cheaneyt]

Will this mod work for town cars

[Green96]

I think it should work on anything 03 an up as long as you have wheel clearance. You need at least 18" wheels, but depending on the shape of the inside of the wheel you could still have problems with certain wheels.

[lji372]

Will this mod work for town cars

i cannot answer that, but i doubt it...........

[cheaneyt]

I think it should work on anything 03 an up as long as you have wheel clearance. You need at least 18" wheels, but depending on the shape of the inside of the wheel you could still have problems with certain wheels.
41187245/40/18

[Zack]

You'd have to measure the ID of a marauder wheel and compare it with yours. It needs to be as big or bigger than the MM wheel. No 2 18" wheels are alike when it comes to ID

[BeanSS]

Money Sent!! $$$

[Bob Mathis]

Any new updates on parts like calipers and rotors? I see Rock Auto has some calipers P/N 18B4702 and 703. Priced at $96 . Are they the ones we need?

[JBeezy]

Any new updates on parts like calipers and rotors? I see Rock Auto has some calipers P/N 18B4702 and 703. Priced at $96 . Are they the ones we need?
See post # 615

[Bob Mathis]

I seen that but the price is $120 per now.

[Zack]

I seen that but the price is $120 per now.

You don't have to buy Centric's.
The A-1 Cardone's are $97 per side.

[JBeezy]

Problem solved plus money saved

[Bob Mathis]

that is the ones I was talking about and I am going to get.

[Bob Mathis]

What would be great is if we could buy caliper cores cheap. Any one know any place?

[Zack]

What would be great is if we could buy caliper cores cheap. Any one know any place?

Such a place does not exist sir.

[rauder88]

What would be great is if we could buy caliper cores cheap. Any one know any place?

I'm going to buy mine local, so I don't have to pay shipping. And the core is only $35 ea. Cheapest I could find a junkyard set for (to use as a core) was $18 ea, I would have to pull them so I'll just pay the core.

[JBeezy]

I'm going to buy mine local, so I don't have to pay shipping. And the core is only $35 ea. Cheapest I could find a junkyard set for (to use as a core) was $18 ea, I would have to pull them so I'll just pay the core.
Sorry if you already know this, just make sure locally you can get brackets as well. I could get the calipers for cheap, but they didn't come with brackets and hardware

[Bad_S55]

I'm going to buy mine local, so I don't have to pay shipping. And the core is only $35 ea. Cheapest I could find a junkyard set for (to use as a core) was $18 ea, I would have to pull them so I'll just pay the core.

You found a Corvette in a junkyard?? Where'd you go, Mount Olympus?!

[rauder88]

Sorry if you already know this, just make sure locally you can get brackets as well. I could get the calipers for cheap, but they didn't come with brackets and hardware

They do, the ones from NAPA Zack had in post #1, but my cousin owns the NAPA in town so I get cost on parts.

[Bob Mathis]

I was just hoping. I will get mine from Rock Auto.

[Bob Mathis]

Jerry, any word when the last brackets will be shipped?

Thanks bob

[rauder88]

You found a Corvette in a junkyard?? Where'd you go, Mount Olympus?!

Should say "auto recycler" have a buddy that works there but they have 3each left and right fronts. But still on the cars, outside so I'm not going to pull them for $30

[chief455]

Jerry, any word when the last brackets will be shipped?

Thanks bob

I have tracking info that mine will arrive today! :D

[lji372]

Jerry, any word when the last brackets will be shipped?

Thanks bob

Most went out yesterday.
One or two left to go due to buyers not includiding address in paypal note.

Maybe next time I'll add a $20.00 penalty :D

[Bob Mathis]

Has any body completed this yet? I know Zack has. If so maybe some pictures.

[Zack]

Has any body completed this yet? I know Zack has. If so maybe some pictures.

Sir, you should read all pages in this thread.

[BeanSS]

Did you buy the silver one in Chicago?

I sure did Zack!

Sorry for the late reply, I missed this somehow

[Bob Mathis]

Sorry Zack, I seen post 475 and 500 again. I am getting old. I am really looking forward to doing this brake kit.

[Krytin]

Just got mine today - Very Nice!!
Thank you very much!
Just ordered everything to complete f/r brake job from Rock Auto.
Need to order lines from Todd.

[rauder88]

Got mine the other day. Works of art, I must say! Too bad no one will be able to see them.

[chief455]

I got mine as well. they are DREAMY
Wait, that is Zack. ;)
the brackets are high quality and in the 'to do' pile.

[shodude]

any chance there is another set for me?! I always missed the deals anymore. guess I need to check the site more! would love for my marauder to actually stop. my f150 stops on a dime and weights twice as much. Crazy!

[lji372]

any chance there is another set for me?! I always missed the deals anymore. guess I need to check the site more! would love for my marauder to actually stop. my f150 stops on a dime and weights twice as much. Crazy!

yes there is.
look up a couple pages for payment info


thank you everybody for the compliments :bows:

now put them on and post pics!!!!!!!!

[shodude]

yes there is.
look up a couple pages for payment info


thank you everybody for the compliments :bows:

now put them on and post pics!!!!!!!!


I am on board! payment sent! woo!! Thanks guys for the work you've done to put this together. :banana:

[Bob Mathis]

Jerry I got my brackets, They look great. Now to start to get all the other stuff. Lines will be next then calipers and rotors. Then pads last.

Thanks Bob

[shodude]

Got my brackets today and ordered all my parts. Hopeful to have this done in the next 2 weeks! Thanks again for the parts! Final cost for this was $554 for me. Not to shabby for 14" brakes! God I hope it stops now. I still feel like I'm trying to slow a train sometimes. anyone need used marauder calipers or stainless front lines?! ha!

[lji372]

Hope you guys follow through with these.

I may even get around to putting some on my car :lol:

[Jolly Roger]

Well I finally got all of the pieces together and here are the results:
Some pics will show the difference in the new and old rotor diameter.
Other pics will show how sad and pathetic my rear brakes now look.
If Zack, Jerry and Todd would care to collaborate on the rears to come up with a budget big set I for one would be very grateful.
(Explorer or Flex maybe?) lol. ;)
In case anyone is wondering:
R1 Concepts rotors (ebay) $130.00 free s/h.
Wagner ThemoQuiet pads (ebay) $42.00 free s/h.
Of course Jerry's adapters $155.00 shipped.
Todd's TCE Zack kit lines $85.00 shipped.
Calipers from local FLAPS (which I was forced to overpay for) because they had corvette cast into them and had to be ground off $270 including brackets and core charges.:(
I see that others have done the conversion for cheaper.
Also those concerned about having to grind the steering knuckle for the adapter bracket clearance,
I used a large mill file and it took about 5 mins. per side.
I've made no attempts at high speed stops yet but normal stops are very positive and no more spongy pedal feel.:)
And they look great.
Now,
about those rears.............

[Bob Mathis]

I have my lines on order, I am getting both front and rear from Todd. Calipers are on order from Rock auto. Got my pads and just need to get rotors. I am going to put drilled on front and rear at the same time.

[tdotcv]

Anyone running 265/45/18 in the front with the big brake upgrade? I think Zack is running 255/45/18 I want to order new front tires and would prefer to go 265 if they fit because I am planning the big brake kit. 255 is considerably cheaper though.

[camelgrundle]

I don't see why it will make a difference.

[JBeezy]

Anyone running 265/45/18 in the front with the big brake upgrade? I think Zack is running 255/45/18 I want to order new front tires and would prefer to go 265 if they fit because I am planning the big brake kit. 255 is considerably cheaper though.
Not preferably for the front but I'm selling some 265/50's in the classified section

[Krytin]

So everything installed perfectly as described!!!
The only hesitation I had was opening up the ID on the brake rotors. Turned out was the easiest part - centered the old rotor over the hole face to face leaving a nice thin even ring of bright metal on the new rotor exposed. Then I used a Dremel tool to remove the exposed ring. Only a couple of minutes work and if you leave a little dirt/rust on the spindle/hub when you test fit the rotor it will leave a little on the ID surface of the rotor on any high spots - quick touch up w/Dremel and a perfect fit!

I can't believe how firm the pedal is w/new SS lines - after almost 13 years and 150K+ mile I guess I got my $$'s worth out of the OEM rubber lines!

I used the Powerslot Drilled & Slotted rotors front and rear for a nice match. I can't get over how massive the front rotors are compared to the stock 12" units - thicker rotor w/ HUGE cooling vanes! Also used Powerslot's Extreme Z26 Carbon Fiber/Ceramic pads front and rear. Never been a big fan of Ceramic as in the past they didn't stop as well as the metallic pads (for me that is).

Just finished the first 120 miles since I finished the install on Friday morning and I have to say right out of the box the stopping power was very much improved over stock!! During the bedding in stops the front wheels were actually locking up/activating the ABS when making the firm/hard stops from 40mph on dry pavement - something the OEM brakes could NEVER do! You could easily bounce someone's head off the dash if you were so inclined!! LOL.

In all I have to say this is the BEST mod I have purchased as far as installation and initial results I have EVER done since I've owned the car from brand new!

I drive this car everyday all year long in all weather and I fully expect this set-up to work/last as well/long as the OEM!

Thanks to all for all the hard work and effort that went into bringing this to the membership - Very Well Done!!

To all who are sitting on the parts and haven't installed them yet - WTF are you waiting for!!!! DO IT!

[lji372]

So everything installed perfectly as described!!!
The only hesitation I had was opening up the ID on the brake rotors. Turned out was the easiest part - centered the old rotor over the hole face to face leaving a nice thin even ring of bright metal on the new rotor exposed. Then I used a Dremel tool to remove the exposed ring. Only a couple of minutes work and if you leave a little dirt/rust on the spindle/hub when you test fit the rotor it will leave a little on the ID surface of the rotor on any high spots - quick touch up w/Dremel and a perfect fit!

I can't believe how firm the pedal is w/new SS lines - after almost 13 years and 150K+ mile I guess I got my $$'s worth out of the OEM rubber lines!

I used the Powerslot Drilled & Slotted rotors front and rear for a nice match. I can't get over how massive the front rotors are compared to the stock 12" units - thicker rotor w/ HUGE cooling vanes! Also used Powerslot's Extreme Z26 Carbon Fiber/Ceramic pads front and rear. Never been a big fan of Ceramic as in the past they didn't stop as well as the metallic pads (for me that is).

Just finished the first 120 miles since I finished the install on Friday morning and I have to say right out of the box the stopping power was very much improved over stock!! During the bedding in stops the front wheels were actually locking up/activating the ABS when making the firm/hard stops from 40mph on dry pavement - something the OEM brakes could NEVER do! You could easily bounce someone's head off the dash if you were so inclined!! LOL.

In all I have to say this is the BEST mod I have purchased as far as installation and initial results I have EVER done since I've owned the car from brand new!

I drive this car everyday all year long in all weather and I fully expect this set-up to work/last as well/long as the OEM!

Thanks to all for all the hard work and effort that went into bringing this to the membership - Very Well Done!!

To all who are sitting on the parts and haven't installed them yet - WTF are you waiting for!!!! DO IT!

:woohoo:

Glad to see people doing it :bows:

Glad I played a part, hats off to zackmaster for spearheading this project :bows:

And a big thanks to Todd for hooking us all up with the brake lines :beer:

[JBeezy]

So everything installed perfectly as described!!!
The only hesitation I had was opening up the ID on the brake rotors. Turned out was the easiest part - centered the old rotor over the hole face to face leaving a nice thin even ring of bright metal on the new rotor exposed. Then I used a Dremel tool to remove the exposed ring. Only a couple of minutes work and if you leave a little dirt/rust on the spindle/hub when you test fit the rotor it will leave a little on the ID surface of the rotor on any high spots - quick touch up w/Dremel and a perfect fit!

I can't believe how firm the pedal is w/new SS lines - after almost 13 years and 150K+ mile I guess I got my $$'s worth out of the OEM rubber lines!

I used the Powerslot Drilled & Slotted rotors front and rear for a nice match. I can't get over how massive the front rotors are compared to the stock 12" units - thicker rotor w/ HUGE cooling vanes! Also used Powerslot's Extreme Z26 Carbon Fiber/Ceramic pads front and rear. Never been a big fan of Ceramic as in the past they didn't stop as well as the metallic pads (for me that is).

Just finished the first 120 miles since I finished the install on Friday morning and I have to say right out of the box the stopping power was very much improved over stock!! During the bedding in stops the front wheels were actually locking up/activating the ABS when making the firm/hard stops from 40mph on dry pavement - something the OEM brakes could NEVER do! You could easily bounce someone's head off the dash if you were so inclined!! LOL.

In all I have to say this is the BEST mod I have purchased as far as installation and initial results I have EVER done since I've owned the car from brand new!

I drive this car everyday all year long in all weather and I fully expect this set-up to work/last as well/long as the OEM!

Thanks to all for all the hard work and effort that went into bringing this to the membership - Very Well Done!!

To all who are sitting on the parts and haven't installed them yet - WTF are you waiting for!!!! DO IT!
What he said... [emoji106]

:woohoo:

Glad to see people doing it :bows:

Glad I played a part, hats off to zackmaster for spearheading this project :bows:

And a big thanks to Todd for hooking us all up with the brake lines [emoji481]
And what he said... [emoji106]

[Zack]

I'm glad you guys are installing the parts and are pleased with the results.
Good stuff

[Bob Mathis]

Got my lines today and they look great stuff. Calipers just got to the house. I all so just ordered the rotors front and rear. Get them Friday. Bad part is I have a yearly car show this weekend. Look's like the end of the month. But that's ok want to paint the calipers.

[Bob Mathis]

Got my front and rear rotors. Calipers are painted now just need some time to do the install.

[MarauderMatt200]

am i too late the party or can i get these too?

[N34stryker]

Hey everyone. I'm new, but I have been lurking for awhile. I have an 03 MGM, but I'm upgrading it with the intent of putting a 5.4. I have all of my suspension done, just waiting for my brackets to arrive! I'm jacked!

[lji372]

am i too late the party or can i get these too?

I will check the shelf Monday and see what's left.

[BLACKMARAUDER04]

I'd also be interested in a set of brackets.

[lji372]

One set left.............

[Bob Mathis]

Dust shields or not?

[BLACKMARAUDER04]

PM sent for brackets

[BLACKMARAUDER04]

Here are the parts prices from a local wholesaler:

2010 Mustang GT500 rotors: $90ea Napa with discount $58.50

2004 C5 Corvette Calipers (no wording) $81.99 + $75 core each Napa with discount $73.79 each +$66.67 core

Severe heavy duty pads: $50

These are all Centrix parts.

[JBeezy]

Dust shields or not?
I didn't remove mine

[Jolly Roger]

I didn't remove mine

Neither did I.;)

[Bob Mathis]

I have started to install the new brakes and went ahead and removed them. I may try and make some new ones that will be bigger. Not to worried I do not drive it much and sure not in the rain unless I get caught in it.

[BLACKMARAUDER04]

NAPA has a 10% discount going thru Wednesday 4-29-15 .

http://www.napaonline.com/Savings/CurrentPromotions/ReserveOnline.aspx

[GetMeMyStogie]

I'm still working through this thread, so maybe this has already been answered.

What's the grade of the aluminum these are manufactured from?

[GetMeMyStogie]

2004 C5 Corvette Calipers (no wording) $60ea + $75 core each Napa with discount $73.79 each +$66.67 core


It costs more after the discount?

[lji372]

I'm still working through this thread, so maybe this has already been answered.

What's the grade of the aluminum these are manufactured from?

6061.............

[04toreador]

Do you have any brackets left? If not, will there be more made?

[lji372]

http://www.mercurymarauder.net/forums/showthread.php?t=97639

[N34stryker]

I'm new here and wanted to thank all of you for your vast knowledge. I just finished my 2003 grand marquis upgrades tonight and couldn't be happier. I used Zack's and lji372's brackets, brake motive rotors, the c5 calipers (one needing the corvette imprint grinded off), tce front lines and ceramic pads. The car is freaking incredible. Brakes are outstanding. Did have an issue with the wheel weights. That was painful, but discount fixed it. I also replaced all of my suspension and steering components front and rear. Added a 1in rear sway bar was well. I love this car. I have sports car handling and braking. Now I just need the power. Trying to decide on power adder or just a 5.4 swap. Thanks again for all of your shared information. If you haven't done the big brake upgrade...do it!

[lji372]

I'm new here and wanted to thank all of you for your vast knowledge. I just finished my 2003 grand marquis upgrades tonight and couldn't be happier. I used Zack's and lji372's brackets, brake motive rotors, the c5 calipers (one needing the corvette imprint grinded off), tce front lines and ceramic pads. The car is freaking incredible. Brakes are outstanding. Did have an issue with the wheel weights. That was painful, but discount fixed it. I also replaced all of my suspension and steering components front and rear. Added a 1in rear sway bar was well. I love this car. I have sports car handling and braking. Now I just need the power. Trying to decide on power adder or just a 5.4 swap. Thanks again for all of your shared information. If you haven't done the big brake upgrade...do it!

Good stuff!!

Isn't this bar awesome :D :D

[NTHE10s]

great minds think alike!!!

just read the full thread. i was just researching the same thing and i came crossed this thread. crazy! anyway i wonder if those brackets would fit a 2000 crown vic and will that setup fit in a 17" factory steel wheel???

Hope it will work. Trying to stop a 4600lb car doing 130+ is crazy on factory brakes

thx Rich

[MOTOWN]

great minds think alike!!!

just read the full thread. i was just researching the same thing and i came crossed this thread. crazy! anyway i wonder if those brackets would fit a 2000 crown vic and will that setup fit in a 17" factory steel wheel???

Hope it will work. Trying to stop a 4600lb car doing 130+ is crazy on factory brakes

thx Rich

No , it barely fits the 18" wheels.

[NTHE10s]

Thank you motown. Back to researching.

[1Marauder]

Thank you motown. Back to researching.

Time for BIGGER wheels.

[MercThunder]

Just received my lines from Todd at TCE...thanks!! They look pretty slick. Now just have to grind that awful "CORVETTE" off the calipers, and I can get it all together :)
Thanks again to Todd, and also Jerry for their help and patience.

[Todd TCE]

Happy to help!

[DWSTANG67]

I just installed the Zack big brake setup so i thought i post a pick


http://i1104.photobucket.com/albums/h322/DWSTANG67/IMG_0446_zpscvsdyms5.jpg


Thanks to Zack for putting this setup togther great job, also thanks to Jerry for the quality workmanship with the brackets and thanks to Todd on a excellent job fabircating the lines.

[lji372]

Glad to help be a part of the modness :beer:

[Bad_S55]

I just installed the Zack big brake setup so i thought i post a pick


http://i1104.photobucket.com/albums/h322/DWSTANG67/IMG_0446_zpscvsdyms5.jpg


Thanks to Zack for putting this setup togther great job, also thanks to Jerry for the quality workmanship with the brackets and thanks to Todd on a excellent job fabircating the lines.

Those look great! What rotors are those?

[DWSTANG67]

Those look great! What rotors are those?

The rotors are from frozen rotor. They are power slot rotors that have been cyrogenically frozen.

i had this type of rotor on my car since 2007 and never had a warping problem



right http://www.frozenrotors.com/product/front-right-power-slot-cryo-rotor-126-61089csr/ford/mustang/2007/shelby+gt500+-and-+gt500kr+models/

LEFT http://www.frozenrotors.com/product/front-left-power-slot-cryo-rotor-126-61089csl/ford/mustang/2007/shelby+gt500+-and-+gt500kr+models/

[lji372]

Dean, can you tell any difference from you old setup to the new one? Or do they just feel like new brakes?

[eric jones]

Dean, can you tell any difference from you old setup to the new one? Or do they just feel like new brakes?
Yes! Do tell😊

[DWSTANG67]

Dean, can you tell any difference from you old setup to the new one? Or do they just feel like new brakes?


Big difference They work great best brake setup i ever had. I took it out today and at first i noticed the pedal was hard and stiff. I performed the brake bedding procdure and noticed as soon as you start adding slight pressure on the pedal i was already slowing down, very effictive, and if you try a panic stop it feels like your going though the window the car stops so quick.

http://i1104.photobucket.com/albums/h322/DWSTANG67/IMG_0447_zpsjxwqlm8v.jpg

I just need the front new springs to settle now, i guess between here and vegas that will happen

[ginger]

Damn, I don't want to re-read this whole thread...didn't someone find some calipers with no "corvette" markings?

Sent from my VS985 4G using Tapatalk

[parker]

Damn, I don't want to re-read this whole thread...didn't someone find some calipers with no "corvette" markings?

Sent from my VS985 4G using Tapatalk


Yes, you can get them from any auto parts store.


Brought to you using an iPhone and I approve this message.

[DWSTANG67]

I ordered mine from advance auto and had no corvette name as you can see in the post of my wheel they look very nice.

[therealrogers]

I ordered refurbished from advance. One side was blank, the other side had corvette markings.


Sent from my iPad using Tapatalk

[daddyusmaximus]

That would suck.

Sent from my SM-N910V using Tapatalk

[MarauderOK]

just finished reading this whole thread. whew. what are you guys using for rear brakes? are mounting adaptors needed for the back too?

[Bad_S55]

just finished reading this whole thread. whew. what are you guys using for rear brakes? are mounting adaptors needed for the back too?

Just stock caliper & rotor size for the rear. Building something around the parking brake is pretty ridiculous.

[ledzilla]

Started reading thsi thread back when it started, before the brackets were even available, and then completely forgot about it. Guess I'm SOL on getting a set now, aren't I? Because my brakes suck ass and I would like to change that. I must say, though, that when I got better pads and rotors than OEM in the rear, driving in the snow all wheels would lock up and completely defy the ABS. Did a lot of winter sliding until I got a different car for a DD.

[lji372]

Started reading thsi thread back when it started, before the brackets were even available, and then completely forgot about it. Guess I'm SOL on getting a set now, aren't I? Because my brakes suck ass and I would like to change that. I must say, though, that when I got better pads and rotors than OEM in the rear, driving in the snow all wheels would lock up and completely defy the ABS. Did a lot of winter sliding until I got a different car for a DD.

no sir, i did another run and have them in stock :beer: :banana2::banana2::banana2:

[MarauderOK]

did anyone use Centric 14162199 with the Corvette logo? Are they black with a white Corvette logo?

[ledzilla]

no sir, i did another run and have them in stock :beer: :banana2::banana2::banana2:

Sweet! I'll send a payment through Paypal soon, then. I'd like to make this my tax refund project.

[fastblackmerc]

What is the big deal with getting a Corvette logo on the calipers. Just grind it off. :banana:

[lji372]

Sweet! I'll send a payment through Paypal soon, then. I'd like to make this my tax refund project.



received a payment, i'm presuming you.


either way a set is going out to ill. :banana2::banana2::banana2::ba nana2:

[svtrichie]

delete post

[ledzilla]

received a payment, i'm presuming you.


either way a set is going out to ill. :banana2::banana2::banana2::ba nana2:

Yup, should have been me. :D

[svtrichie]

local guy bought. sorry.

[O's Fan Rich]

What is the big deal with getting a Corvette logo on the calipers. Just grind it off. :banana:

But then you have to repaint it! Leave the Corvette on and listen to the tongues wag!!!:blah:

[MarauderOK]

What is the big deal with getting a Corvette logo on the calipers. Just grind it off. :banana:

to me, it's like wearing a porsche t shirt and hat when you don't actually own a porsche.

[lji372]

to me, it's like wearing a porsche t shirt and hat when you don't actually own a porsche.

So your saying I need to pitch my Porsche shirts. :( :lol:

[RubberCtyRauder]

So your saying I need to pitch my Porsche shirts. :( :lol:

You have Porsche Lynn T-shirts? :D

[ledzilla]

received a payment, i'm presuming you.


either way a set is going out to ill. :banana2::banana2::banana2::ba nana2:

The brackets arrived last night. Nice and shiny. Thanks for getting them out so quick! :D

[04DTR_SSCC]

no sir, i did another run and have them in stock :beer: :banana2::banana2::banana2:

Still have brackets in stock??:help:

[lji372]

Yes sir

$155 send as friends and Family or add 3%

[daddyusmaximus]

Contemplating this upgrade for the upcoming year. Would these work?

http://www.jegs.com/i/Power+Stop/419/S4702/10002/-1?CAWELAID=230006180001019093&CAGPSPN=pla&gclid=CjwKEAiA9JW2BRDxtaq2ruDg 22oSJACgtTxcBT229wYRI5BCYilF8h BVYob_OcV9sfsZKalCopw65xoCBBvw _wcB

No mention of a core charge, but even so it seems like a decent price for a pair of Vette calipers.

[Bad_S55]

Contemplating this upgrade for the upcoming year. Would these work?

http://www.jegs.com/i/Power+Stop/419/S4702/10002/-1?CAWELAID=230006180001019093&CAGPSPN=pla&gclid=CjwKEAiA9JW2BRDxtaq2ruDg 22oSJACgtTxcBT229wYRI5BCYilF8h BVYob_OcV9sfsZKalCopw65xoCBBvw _wcB

No mention of a core charge, but even so it seems like a decent price for a pair of Vette calipers.

Those are just remanufactured C5 calipers, so those are good.

[daddyusmaximus]

Best price I've seen so far. Still researching this mod. I just a basic parts replacer kinda guy. Almost 50 pages and I have nothing for short term memory... but this looks better than over 2K for the Wilwoods. (that I want)

[Sully008]

Contemplating this upgrade for the upcoming year. Would these work?

http://www.jegs.com/i/Power+Stop/419/S4702/10002/-1?CAWELAID=230006180001019093&CAGPSPN=pla&gclid=CjwKEAiA9JW2BRDxtaq2ruDg 22oSJACgtTxcBT229wYRI5BCYilF8h BVYob_OcV9sfsZKalCopw65xoCBBvw _wcB

No mention of a core charge, but even so it seems like a decent price for a pair of Vette calipers.

Those seem rather pricey for just a pair of calipers. Here's my parts list from Rockauto:

Calipers:
Centric 14162127 and 14162128

Rotors:
Centric 12661089SL and 12661089SR slotted only

Pads:
Bendix D731 CT (front) D932CT (rear)

Grand total with shipping for everything to Canada: $657.80US

No core returned either.

My review: http://mercurymarauder.net/forums/showthread.php?t=97949

[MarauderOK]

Hey, which ss hose kit am I supposed to get from TCE for this? The one with banjos, brackets, washers, or the one that just says "with zack fronts"?

Thanks

[DWSTANG67]

first option is all 4 lines for stock calipers.

second option that says complete 4 with zack fronts, are the lines for the zack big brake kit and 2 rear lines for stock calipers.

The 3 option is the fronts only for the zack kit

[MarauderOK]

first option is all 4 lines for stock calipers.

second option that says complete 4 with zack fronts, are the lines for the zack big brake kit and 2 rear lines for stock calipers.

The 3 option is the fronts only for the zack kit

good to know! Glad I asked

Not everyone has the brakepads overlap with the edge of the rotor like Sully008, correct?

[Bradley G]

If you do bigger brakes on the
front, has anyone adjusted the bias or maybe felt like it could be
Improved on?
Great thread , hoping by the time I need brakes, I'll be in the market.
Is there any budget kit for the rear?


Sent from my XT1096 using Tapatalk

[Bradley G]

Those seem rather pricey for just a pair of calipers. Here's my parts list from Rockauto:

Calipers:
Centric 14162127 and 14162128

Rotors:
Centric 12661089SL and 12661089SR slotted only

Pads:
Bendix D731 CT (front) D932CT (rear)

Grand total with shipping for everything to Canada: $657.80US

No core returned either.

My review: http://mercurymarauder.net/forums/showthread.php?t=97949
Great info thanks!
You still running those control arms?
I just checked both sets I did for the MM & LSE , no visible cracks in the welds.
They look like hell though.[emoji13]

Sent from my XT1096 using Tapatalk

[Zack]

good to know! Glad I asked

Not everyone has the brakepads overlap with the edge of the rotor like Sully008, correct?

When I did the original setup,, my rotor was flat all the way to the edge.

Some rotors come with a bevel on the outer edge, which will create the illusion of an overlap.

[Sully008]

Great info thanks!
You still running those control arms?
I just checked both sets I did for the MM & LSE , no visible cracks in the welds.
They look like hell though.[emoji13]

Sent from my XT1096 using Tapatalk

Good to hear from you, Brad! I'm still running the lower boxed control arms from you. I replaced the uppers with the Limo versions, though.



good to know! Glad I asked

Not everyone has the brakepads overlap with the edge of the rotor like Sully008, correct?

Are you talking about the inside of the rotor where the pads don't reach? Or the outside? I'm pretty sure the outside is even with the pads. I'll have to check, but the car's buried in snow right now.

[lifespeed]

If you do bigger brakes on the
front, has anyone adjusted the bias or maybe felt like it could be
Improved on?
Great thread , hoping by the time I need brakes, I'll be in the market.
Is there any budget kit for the rear?

Somebody is thinking. The factory Marauder bias is too much to the front, shifting some braking to the rear is very helpful. The parameters you can adjust are the ratio of piston areas front/rear and the ratio of rotor diameters. I have not looked into the piston area ratios of the Zack/LJ setup as I already have a Wilwood solution with added rear bias.

It is also worth mentioning when mixing floating and fixed calipers on the same car to calculate the area ratios one must double the piston area of the floating calipers because of the way they act on both sides of the rotor hydraulically.

But here are the OEM parameters:
front 48mm pistons (2 per) = 5.61" piston area
rear 48mm piston = 2.805" area
F/R ratio = 2

The Wilwood kits come out at about 1.64 piston area F/R and 14"/13" rotor ratio. This seems to work very well, probably a good goal.

[Bradley G]

Somebody is thinking. The factory Marauder bias is too much to the front, shifting some braking to the rear is very helpful. The parameters you can adjust are the ratio of piston areas front/rear and the ratio of rotor diameters. I have not looked into the piston area ratios of the Zack/LJ setup as I already have a Wilwood solution with added rear bias.

It is also worth mentioning when mixing floating and fixed calipers on the same car to calculate the area ratios one must double the piston area of the floating calipers because of the way they act on both sides of the rotor hydraulically.

But here are the OEM parameters:
front 48mm pistons (2 per) = 5.61" piston area
rear 48mm piston = 2.805" area
F/R ratio = 2

The Wilwood kits come out at about 1.64 piston area F/R and 14"/13" rotor ratio. This seems to work very well, probably a good goal.
I remember Triple threat mentioned that the eight second beast , had modded rear brakes because of the change in size of the rear wheels.
Also the bias was adjusted towards the rear to compensate for the changes.
I love that you guys are pushing the envelope , even after all the years.



Sent from my XT1096 using Tapatalk

[Bradley G]

Good to hear from you, Brad! I'm still running the lower boxed control arms from you. I replaced the uppers with the Limo versions, though.




Are you talking about the inside of the rotor where the pads don't reach? Or the outside? I'm pretty sure the outside is even with the pads. I'll have to check, but the car's buried in snow right now.
Yeah those are the best option for uppers, on the cheap.
At least they were in the day, not even sure if they are still available!

Sent from my XT1096 using Tapatalk

[Ccdline73]

Anymore brackets left?

[lji372]

Wow!!!!

It's been over two years and I finally have all the parts ordered to do this on one of my cars. :lol:

[jay87lx]

Anymore brackets left?

I would be interested as well....

[lji372]

I would be interested as well....

Yes there are. I have taken the remainder and sent them off for a bright black anodize process so they won't oxidize. Waiting on final cost, if it's marginal I'll eat it. If it's a bit more they may go up a few dollars in price.
I should have them back Thursday or Friday and get the final cost. :beatnik: