PDA

View Full Version : RAS issue



RF Overlord
07-20-2014, 01:15 PM
Came home the other day and noticed that the back end of The Blackbird looked way high. Started troubleshooting it today and the battery was dead. As soon as I hooked up the charger, the RAS compressor started going and won't shut off. Pulled the relay in the BJB. Performed the troubleshooting procedure in the FSM and it seems the RAS/EVO module is bad. Can't find it listed on tascaparts.com. Anyone have one they don't need?

Zack
07-20-2014, 04:58 PM
Maybe the sensor linkage is undone, or the switch back there is bad. Check that first

Mr. Man
07-20-2014, 05:15 PM
Came home the other day and noticed that the back end of The Blackbird looked way high. Started troubleshooting it today and the battery was dead. As soon as I hooked up the charger, the RAS compressor started going and won't shut off. Pulled the relay in the BJB. Performed the troubleshooting procedure in the FSM and it seems the RAS/EVO module is bad. Can't find it listed on tascaparts.com. Anyone have one they don't need?
When did you start working for the Army? ;)

fastblackmerc
07-21-2014, 05:40 AM
I think I have one Bob.