metco watts links

[crownvic05]

About to do the purchase but does the kit come complete with the bracket for the height adjuster for rear air suspension?

[RubberCtyRauder]

I heard that lately they do not come with them do to availability.. ..Sparta ones reuse the factory bracket I was told.
metco also must reuse the bracket read here.

http://www.metcomotorsports.com/proddetail.asp?prod=MWL0304

[crownvic05]

Wonder how its suppose to be modified and if its complicated. Anyone done this already?

[RubberCtyRauder]

On metco's website link it says "slightly" modified and instructions are included. It can't be that difficult I would imagine. Call them up and ask, they are helpful people

[fastblackmerc]

I didn't have to modify mine, just remove from the old one and install on the new one.

[crownvic05]

I didn't have to modify mine, just remove from the old one and install on the new one.

Just what I wanted to hear. So its really that simple huh?

You have metco right?

[fastblackmerc]

Just what I wanted to hear. So its really that simple huh?

You have metco right?

Yes, I've had the Metco's on for at least 10 years. Just match up the new Watts link with the old one because you can install it upside down. The nut on the rear end is tight... really really tight, like over 200 ft lbs tight. Remember to grease the bushings at least twice a year.

[crownvic05]

Do the metco come with that joint that connects to the pumpkin?

[fastblackmerc]

Do the metco come with that joint that connects to the pumpkin?

What joint?

[crownvic05]

What joint?

This joint
http://m.ebay.com/itm/230597155368?nav=SEARCH

[fastblackmerc]

This joint
http://m.ebay.com/itm/230597155368?nav=SEARCH

No, reuse the old one.

[JoeBoomz]

To "modify" the bracket you pop the rivets out and use bolts.

[fastblackmerc]

To "modify" the bracket you pop the rivets out and use bolts.

Mine was bolted in from the factory.