Compatible doors for Marauder

[cqualls]

Hello all, new to the site. I've got a 03 Marauder I've had for a couple yrs...love the car, best car I've had in fact. Last year managed to get into a little parking lot accident and creased my rear passenger door. Looking at replacing the entire door instead of bodywork($$$). As far as I can tell, multiple yrs on Crown Vics/Grand Marquis would be interchangeable. Anybody have an idea on exact yrs? Also, best options for adding low end(pre 4000rpm) power?

Thanks!

Colby

03 Mercury Marauder(blk)
All Stock besides Firehawk replacement tires

[jwibbity]

Hello all, new to the site. I've got a 03 Marauder I've had for a couple yrs...love the car, best car I've had in fact. Last year managed to get into a little parking lot accident and creased my rear passenger door. Looking at replacing the entire door instead of bodywork($$$). As far as I can tell, multiple yrs on Crown Vics/Grand Marquis would be interchangeable. Anybody have an idea on exact yrs? Also, best options for adding low end(pre 4000rpm) power?

Thanks!

Colby

03 Mercury Marauder(blk)
All Stock besides Firehawk replacement tires

As far as the doors go I got nothing, but low end power there isn't really much you can do without some sort of power adder, that being said if remaining N/A 4.10s, JLT, and a tune will get you off the line alot quicker:beer:

[Spectragod]

Doors 98 and up, in a pinch, 92 and up with changing a lot of internals.

[EMAS]

Doors 98 and up, in a pinch, 92 and up with changing a lot of internals.

If you are using a 92-97 door it must be from a GM the aero roofed CVs have different rear doors.

Either way a 98 up is the best way to go and it is not like they are uncommon.

[cqualls]

Thanks for the info guys, figured 98 and up was most likely the way to go. Unfor or fortunately depending on how you're looking at it...OEM Marauder parts are hard to come by.

[vegasmarauder]

If you use a 98-02 door you will have to use the interior door handle mounts from your old one. They were changed 03-up. They are flat metal plates that just pop rivet on the door shell.