PDA

View Full Version : The rebuild


Cougar_Marauder
08-04-2014, 08:03 PM
Some of you may recall I had a slight mishap that sent a rod into the side of the block (after Trilogy install). After a few tears and many dollars I am nearly back on the road, I am just waiting for the final tune to be done. This is what I decided to go with:
-MMR 5.0 stroked shortblock with 7qt oil pan + high flow oil pump
-the heads were resurfaced and rebuilt/valve job with SS valves and springs
-60lb injectors
-Aeromotive 340 fuel pump
-full Stainless Works exhaust
-Killer Chiller (drag setup)
-2.8" upper pulley with +2lb lower

I'll post up with dyno results when I get them.
Zack
08-04-2014, 08:21 PM
Where did you mount the KC?
Cougar_Marauder
08-05-2014, 12:55 AM
Where did you mount the KC?


In the front bumper area, similar to how they recommend it on the cobra. Some of the lines/hoses are different though.
CWright
08-05-2014, 02:33 AM
Can you post up some Picts of the KC installed?
Limited360
08-05-2014, 03:48 AM
Yes more KC info! This is on my purchase list for a winter install...
Zack
08-05-2014, 09:42 AM
I mounted mine in the metal bumper support. Pretty easy
CWright
08-05-2014, 12:15 PM
I mounted mine in the metal bumper support. Pretty easy

Do you have Picts?
Zack
08-05-2014, 01:24 PM
Do you have Picts?

Imagine the KC bolted in the center of the bumper support.

No pics. Don't even have it on the car anymore.
Limited360
08-05-2014, 01:35 PM
Imagine the KC bolted in the center of the bumper support.



No pics. Don't even have it on the car anymore.


Are you saying you have parts for sale? ;)
Zack
08-05-2014, 07:18 PM
Are you saying you have parts for sale? ;)

Sold long ago.

But I have another kit BNIB.

not for sale
Limited360
08-05-2014, 07:18 PM
Such a tease
Cougar_Marauder
08-08-2014, 09:32 PM
KC has a kit for the Marauder if you call them. It is the same as the Cobra kit but with a different mounting bracket and a few different hoses. I have some pics I will post when I get a chance.

I haven't had much time with it yet, but so far I haven't noticed much lower intake temps compared to before (at 83° about 20-25 above ambient while driving).... though this is a different engine with the smaller pulley on the SC. It never got hotter then about 30ish above ambient when in traffic though.
Cougar_Marauder
08-10-2014, 04:51 AM
I couldn't get the best pics but here they are.