Bay Area folks: Need help diagnosing issues on the suspension

[DeepSea117]

Hey people, I'm looking to meet up to compare the rear height for a Marauder with a stock suspension. Earlier this year, my car was hit while I it was parked and they had to replace the rear axle. I'm pretty sure I know my car and the ride height looks incorrect, even after the air compressor finishes raising the car up. I just got back home, which is why it took me a while to check the work the body shop did. It drives the same, tires are the same, all that. Just want to get the knowledge of the anyone out here as to what may be the problem. Thanks!

Dean

[gdsqdcr]

Hey people, I'm looking to meet up to compare the rear height for a Marauder with a stock suspension. Earlier this year, my car was hit while I it was parked and they had to replace the rear axle. I'm pretty sure I know my car and the ride height looks incorrect, even after the air compressor finishes raising the car up. I just got back home, which is why it took me a while to check the work the body shop did. It drives the same, tires are the same, all that. Just want to get the knowledge of the anyone out here as to what may be the problem. Thanks!

Dean


Mine rear height is not stock, a little lower. You can adjust your rear height by moving the adjuster under the car ... IIRC it is the watts link. Maybe they just adjusted it a different height than original.

[DeepSea117]

Thanks, do you know the specs for the adjustments to get it back to the stock height?

[Zack]

Thanks, do you know the specs for the adjustments to get it back to the stock height?

Your eyes are the specs. Adjust until you achieve the desired ride height

[lifespeed]

Make small adjustments to the sensor link attachment point. No more than 1/8" at a time.

[fastblackmerc]

Your eyes are the specs. Adjust until you achieve the desired ride height

What he said ^^^^^^^^^^^^