Under Hood fabric

[Guittard22]

Anyone know if they still make the fabric liner under the hood for the Marauder ?if so anyone have a part number ?

[88LTDCV351]

I believe it is 3W7Z 16738 AA. But I believe its been discontinued. But they will probably give you a superseeding Grand Marquis part number that doesn't have a hole for the underhood light (but I think some Marauders didn't have the underhood light so maybe you are ok).

[fastblackmerc]

Probably still available since it also fits CV's and GM's

[fastblackmerc]

I believe it is 3W7Z 16738 AA. But I believe its been discontinued. But they will probably give you a superseeding Grand Marquis part number that doesn't have a hole for the underhood light (but I think some Marauders didn't have the underhood light so maybe you are ok).

2003's had the under hood light.

2004's didn't have the under hood light.

[jwibbity]

Some 2003's had the under hood light.

2004's didn't have the under hood light.

Correction.......:lol:

[NavySeabee]

Here you go slick. Splurge a little.

http://www.carmotorsports.com/UHI_Marauder.htm

[massacre]

Here you go slick. Splurge a little.

http://www.carmotorsports.com/UHI_Marauder.htm

Wow I never knew such a thing existed...lol
What's up with the kits? Do they come with spray adhesive and you just cover your existing insulator?

[Guittard22]

Here you go slick. Splurge a little.

http://www.carmotorsports.com/UHI_Marauder.htm



Pete you sure you want me to get this before the car show :) ! I trying to give you a shot at winning ! :puke:

[gdmjoe]

6W7Z-16738-A - Hood Insulator (still available)
.

[Guittard22]

6W7Z-16738-A - Hood Insulator (still available)
.



Thank you :beer:

[Jeffonebuck]

https://www.bluespringsfordparts.com/parts/1999/Mercury/Grand%20Marquis/LS?siteid=214944&vehicleid=52748&diagram=LA98075


Sent from my iPad using Tapatalk

[1Marauder]

I tried to order this... the freight was outrageous. I was told it is better to call around to your local ford dealers... and seek a deal from them, as they can internalize the freight.

I need two!

[RubberCtyRauder]

Any ford dealer should be able to get it on a stock order, may take a week, but they don't pay "freight" per say from like roadway, yellow freight etc on a per piece basis.

[1Marauder]

Yep, and because of the dimensions... trying to get them shipped from online is COSTLY!

[champ1173]

I ordered one from the dealership today, and they said I should get it Wed.. I would've loved to have gotten one from Car Motorsports, but $400 w/shipping! WOW!

[1Marauder]

Did you get a Marauder one? how much?

[champ1173]

Mine was $125, and is the same as the Crown Vic, and the Gran Marquis. They said that the 2003 w/cut outs was obsolete. I didn't have a problem with this, because I have a 2004. I bought new push in pins to go with it too! It's been like Christmas for my MM!:)

[Guittard22]

Mine was $125, and is the same as the Crown Vic, and the Gran Marquis. They said that the 2003 w/cut outs was obsolete. I didn't have a problem with this, because I have a 2004. I bought new push in pins to go with it too! It's been like Christmas for my MM!:)



How much were the push in pins ?

[champ1173]

How much were the push in pins ?
I don't have the receipt in front of me, but I know it was under $10, for 20 of them. The guy at the dealership said, they only came in a package of 20. (I'm ok with that, in case sometime down the road, I need to replace one.) I just hope he's right on that. I ordered new cam cover bolts, and he said they came in packages of 8, so I ordered 2 sets. Well, what I got was 4 sets, with 4 screws in it. Oh, and they were the coil cover bolts that he ordered! I guess I'll find out on Wed..

[fastblackmerc]

Get General Motors ones from Dorman. There are bigger in diameter.

[champ1173]

Get General Motors ones from Dorman. There are bigger in diameter.

Now you tell me!:D

[fastblackmerc]

Now you tell me!:D

Didn't ask...... :D