How much boost are y'all getting with the 6-rib setup on the centris?

[SIZEMOREMK]

Needing more boost...

I'm getting to about 12 lbs with the 3.25 SC pulley and the stock 6-rib setup with my novi 1200.

I imagine I'll need to upgrade to 60lb injectors and upgrade fuel pump as well.

Jeff at Mo's told me that he believes there is an ATI balancer that would work as well as the innovators west units? Anyone use anything else?

[Comin' in Hot]

About 12-14lbs. with a 3.125 pulley on a Vortech S- Trim, it put down 488rwhp/440rwtq before it ran out of fuel at 5500 rpms. I just upgraded the exhaust, the fuel system is next, then it's going back to Mo's.

[Comin' in Hot]

I forgot to mention I have a water to air setup and forged internals with 8.5-1 compression.

[MOTOWN]

ATI does make Balancers for the 4.6 , I have an IW 18% O/D unit.

[Marauderjack]

P1-SC with 3.7 pulley......9.0-11.0 PSI depending on the weather!!:burnout:

[Embassy]

P1-SC with 3.7 pulley......9.0-11.0 PSI depending on the weather!!:burnout:


P1-SC with 3.6 making 11-12psi depending on the weather. :cool:

[Jeronimojc]

Try the the thread below. It shows various centri setups. It would be great if you post there too to keep all relevant info in one place.

http://www.mercurymarauder.net/forums/showthread.php?t=94180




Sent from my iPhone using Tapatalk

[napolitano]

I ran 12lbs getting bout 480 to the wheels. How much power are you pushing out now?


GOT BOOST ?

[SIZEMOREMK]

424hp 367 tq

[MMBLUE]

I ran 12lbs getting bout 480 to the wheels. How much power are you pushing out now?


GOT BOOST ?

Levi.. This is my old car and your old blower. Maybe you can tell him #'s that you got with the NOVI 1200.

[napolitano]

Oh. Yeah 12lbs 480 . Let me find the dyno sheet. Op pm me your cell number and I'll text you the dyno sheet that setup can put out


GOT BOOST ?