View Full Version : Switchback turn signals?
PB Marauder
10-01-2014, 10:57 AM
Does anybody have those switchback turn signals. I think they are white LED driving lights that turn amber when you engage your turn signal. I found them somewhere a while back but can't seem to locate them again. Does anyone have a website to buy and/or part numbers or even bulb size? Thanks for any help!
ChiTownMaraud3r
10-01-2014, 11:12 AM
I have some DDM ones for my fronts, they aren't too bright when "amber" which looks more red than amber. The only ones I would say are legit enough are the $140 VLEDs.com ones I am too cheap to buy.
MOTOWN
10-01-2014, 11:38 AM
I have the Vleds switch backs and they are sweet , very bright! I've had them a couple years now , i didn't pay 140 for mines.
fastblackmerc
10-01-2014, 11:43 AM
Superbriteleds
https://www.superbrightleds.com/moreinfo/tail-brake-turn/3157-switchback-led-bulb--dual-intensity-60-smd-led-tower,-a-type/1916/4478/
napolitano
10-01-2014, 12:26 PM
I have the Vleds switch backs and they are sweet , very bright! I've had them a couple years now , i didn't pay 140 for mines.
What he says. I gave same. Ezcelkentcquality
GOT BOOST ?
PB Marauder
10-01-2014, 12:34 PM
Thanks guys! Found em on VLEDS for $80.
airjordan2k8
03-04-2019, 08:57 AM
Superbriteleds
https://www.superbrightleds.com/moreinfo/tail-brake-turn/3157-switchback-led-bulb--dual-intensity-60-smd-led-tower,-a-type/1916/4478/Do these require a resistor?
Sent from my SM-G965U using Tapatalk
Ambitious1
03-04-2019, 12:15 PM
Do these require a resistor?
Sent from my SM-G965U using Tapatalk
In the fine print of the ad, it does say it requires a resistor.
airjordan2k8
03-04-2019, 12:41 PM
In the fine print of the ad, it does say it requires a resistor.Duh right I guess cause I kept reading it they were saying some models require resistors . So I guess the question should have been do our cars require resistors...
Sent from my SM-G965U using Tapatalk
RubberCtyRauder
03-04-2019, 02:19 PM
yes, marauders need resistors or an electronic flasher to use led bulbs for those applications
airjordan2k8
03-06-2019, 06:32 AM
yes, marauders need resistors or an electronic flasher to use led bulbs for those applicationsCool man thanks
Sent from my SM-G965U using Tapatalk
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.