PDA

View Full Version : Coolant tube question/Advice


CHSurvivor
10-25-2014, 12:59 PM
Hi, Pass side coolant tube that runs from front down pass side block to heater core has cancer. I need to replace the tube asap.

Q. Is this the same as a CV/GM part or Mustang part or MM only?
Q. What do they cost Canadian?
Q. It looks like 2 clamps to bolts but bolt on manifold looks seized....recommendations?
Q. Just drain coolant at rad,replace part, reinstall and bleed coolant?
Q. Any tips?

thank you in advance.
massacre
10-25-2014, 01:26 PM
It's MM only.
CHSurvivor
10-25-2014, 01:52 PM
You replaced yours? What did it cost? do it yourself or?
RubberCtyRauder
10-25-2014, 01:59 PM
Anytime the coolant system is opened, be sure to "burp" the system or you will overheat due to an air pocket keeping the coolant from circulating. instructions below

http://reischeperformance.com/refill.html
loud2004marquis
10-25-2014, 02:00 PM
Removed mine when I put the blower on...Pack your patience, it's a funny shape to get out of there.

Removed from car:

http://www.supermotors.net/getfile/998131/fullsize/329-pipe-out-of-car.jpg
CHSurvivor
10-25-2014, 02:02 PM
thanks, remember how much?
Mr. Man
10-25-2014, 02:04 PM
My dealer said the part is obsolete and he couldn't find one anywhere. I need one as well.
CHSurvivor
10-25-2014, 02:14 PM
thats insane. Someone has to re pop the part....
Mr. Man
10-25-2014, 02:19 PM
It doesn't look to hard to bend one but I'm not sure how important the ends are to the leak proofness, for lack of a better word.
CHSurvivor
10-26-2014, 02:26 AM
seems like a common part to replace....I can't see it being obsolete....Ill call Monday.
Thanks for instructions fellas
Zack
10-26-2014, 06:36 AM
Just replace it with hose.
I have a bunch of them but I can't stand shipping to Canada
lji372
10-26-2014, 08:08 AM
Just replace it with hose.
I have a bunch of them but I can't stand shipping to Canada

This^^^^^^^^^^
CHSurvivor
10-26-2014, 10:32 AM
May I see a photo please? How much? Ill pay shipping overnight.
thank you. PM if you wish
fastblackmerc
10-27-2014, 08:08 AM
I'd replace it with a hose.
CHSurvivor
10-27-2014, 10:50 AM
i PM Zack twice , since he has a few as he posted. Hope he can ship me one, even though I am his neighbour upstairs
MM in MN
10-27-2014, 12:15 PM
mine had been replaced with a hose when I got the car, been that way ever since, no issues
JBeezy
10-27-2014, 07:36 PM
Correct me if I'm wrong but this would be a good time for the rear cooling mod and use Seige's routing and eliminate that tube all together
Just my .02. I'm done...
lji372
10-27-2014, 09:09 PM
Correct me if I'm wrong but this would be a good time for the rear cooling mod and use Seige's routing and eliminate that tube all together
Just my .02. I'm done...

Yup, but I didn't want to open that can :D
massacre
10-28-2014, 03:38 AM
Yup, but I didn't want to open that can :D

Same here lol.
CHSurvivor
10-28-2014, 05:43 AM
Since he never responded :( I will replace it with a hose. I am going to make it long enough to sit on the wheel well, im really annoyed its a common part that jobbers do not re pop and dealers are discontinued. We are a bunch of car guys and can figure stuff out but what about someone being stranded with no automotive knowledge or someone loving cars but no mechanical ability. I call BS on this one. GRRR
fastblackmerc
10-28-2014, 06:11 AM
Just replace it with hose.
I have a bunch of them but I can't stand shipping to Canada

Maybe you didn't see Zack's post? ^^^^^


Since he never responded :( I will replace it with a hose. I am going to make it long enough to sit on the wheel well, im really annoyed its a common part that jobbers do not re pop and dealers are discontinued. We are a bunch of car guys and can figure stuff out but what about someone being stranded with no automotive knowledge or someone loving cars but no mechanical ability. I call BS on this one. GRRR

It's not a common part. It's specific to the Marauder so the market for a re pop is a small percentage of the 11,052 MM's made. I believe Ford only has to have replacement parts for 10 years. As for the "no mechanical ability" or "no automotive knowledge", how hard is it to install a hose as a replacement? :dunno:
CHSurvivor
10-28-2014, 12:52 PM
How hard is it for a non mechanical person to drain a rad, burp it with zero mechanical knowledge? I don't know. I am not the person. My wife loves cars but her mechanical knowledge is zilch. So it would be very hard for her to do it correctly by herself. but I am not here to argue....Ill just figure this out on my own. sorry to have mentioned it. didnt meant to ruffle anyones feathers
Jeffonebuck
10-28-2014, 01:27 PM
How hard is it for a non mechanical person to drain a rad, burp it with zero mechanical knowledge? I don't know. I am not the person. My wife loves cars but her mechanical knowledge is zilch. So it would be very hard for her to do it correctly by herself. but I am not here to argue....Ill just figure this out on my own. sorry to have mentioned it. didnt meant to ruffle anyones feathers
Have you tried TASKA parts online ? If you decide to burp it yourself, just private message me:help: and I'll try to help you thru. :beer: Heater Hose Part # 3W3Z-18472-AC Scroll down till you see this part# http://www.fordpartsgiant.com/parts-list/2003-ford-crown-victoria/heater-hose-installation-8-cyl-4-6l-sohc.html
Chi Stallion
10-28-2014, 03:26 PM
I ordered mines about 2 years ago and still haven't got to install it yet


Sent from my iPhone 5 using Tapatalk
CHSurvivor
10-28-2014, 03:29 PM
I did thank you. A fellur posted the 'Burp" Procedure above. Similar to many cars but appreciated it just the same and will follow through. I will have to replace it with a simple 5/8ths hose. Normally I just like things perfect and factory. But if this is the only route, then it is....I always strive to do my best no matter what.
BTW....Just past Bowling Green Ky last month....BEAUTIFUL COUNTRY....I love the states
lji372
10-28-2014, 04:07 PM
Since he never responded :( I will replace it with a hose. I am going to make it long enough to sit on the wheel well, im really annoyed its a common part that jobbers do not re pop and dealers are discontinued. We are a bunch of car guys and can figure stuff out but what about someone being stranded with no automotive knowledge or someone loving cars but no mechanical ability. I call BS on this one. GRRR

If you really want it that bad I will find it tomorrow.

Pm me full shipping addy and I'll get you a cost tomorrow. Unless you have a ups or fed ex account and I'll ship it on your account :beer: