Blender door actuator

[burt ragio]

Went on line rockauto.com I see there are two types of blender door acuators. What is the P/N for our blender door acuator ?

[fastblackmerc]

Went on line rockauto.com I see there are two types of blender door acuators. What is the P/N for our blender door acuator ?

The Ford P/N's are: XW7Z-19E616-BA or YH-1766

I see the Rock Auto site only lists Dorman parts. I'd be leery of using a Dorman part for a job that is very hard to do. I've heard of early and repeated failures of Dorman blend door actuators. For a few dollars more you can source a real Ford part.

Here are some genuine Ford parts on eBay:

http://www.ebay.com/sch/i.html?_odkw=604214&_from=R40|R40|R40&_osacat=0&_from=R40&_trksid=p2045573.m570.l1313&_nkw=YH-1766&_sacat=0

[71cyclone]

The Ford P/N's are: XW7Z-19E616-BA or YH-1766

I see the Rock Auto site only lists Dorman parts. I'd be leery of using a Dorman part for a job that is very hard to do. I've heard of early and repeated failures of Dorman blend door actuators. For a few dollars more you can source a real Ford part.

Here are some genuine Ford parts on eBay:

http://www.ebay.com/sch/i.html?_odkw=604214&_from=R40|R40|R40&_osacat=0&_from=R40&_trksid=p2045573.m570.l1313&_nkw=YH-1766&_sacat=0
FastBlack is a Tru Guru ,The Aftermarket part failed in my car after 6 months:depress: Do it once..$

[Marauderman]

The Ford P/N's are: XW7Z-19E616-BA or YH-1766

I see the Rock Auto site only lists Dorman parts. I'd be leery of using a Dorman part for a job that is very hard to do. I've heard of early and repeated failures of Dorman blend door actuators. For a few dollars more you can source a real Ford part.

Here are some genuine Ford parts on eBay:

http://www.ebay.com/sch/i.html?_odkw=604214&_from=R40|R40|R40&_osacat=0&_from=R40&_trksid=p2045573.m570.l1313&_nkw=YH-1766&_sacat=0

Trust my Bro here --he truly knows ---he should --he tore--literally apart my dash and installed the Ford part he recommends---

[fastblackmerc]

FastBlack is a Tru Guru ,The Aftermarket part failed in my car after 6 months:depress: Do it once..$

At the Ford dealer I believe the part is about $75.00.

Going to be installing my Ford one in the spring... unless we get some nicer weather. Gotta to the BCM too....

[Marauderman]

At the Ford dealer I believe the part is about $75.00.

Once again --right--mine was $73

[RF Overlord]

The Ford P/N's are: XW7Z-19E616-BA or YH-1766Affirmative. Genuine Motorcraft part from tascaparts.com is $48.81

Curt, the other number you saw listed is the blend door actuator for cars with manual HVAC (as opposed to EATC).

[burt ragio]

OEM parts are the only way to go. Can't wait to get it fixed. Having to adjust the temp with the windows up & down every few minutes gets old. Thanks for all the help.