Vacuum Question

[jnobles06]

I am re-installing the marauder engine after a rebuild, and have it almost all done, but i can't find the pictures i took of the vacuum connections.


I need to know what lines attach to the canister purge valve mounted on the cowl, i just don't know which goes on top and which one goes on the bottom. i know the tiny one goes on the very bottom but i mean the two larger ports.

I also need to know what hooks up to the distribution block mounted on the firewall behind the intake. I need to know what hooks to the top barb and the barb that points to the passenger side on said block, and also where the long sliver barb on the back of the upper intake manifold itself runs, perhaps to the that distro block?


TIA.

[jnobles06]

well i broke down and got got a digital service manual off ebay, but it wont be here for like a week.

if anybody could snap a pic of the vacuum lines behind the intake and to the passenger side of the intake i'd really appreciate it.

[MaDMerc]

Got this from a Ford mechanic. It's the panther specific vacuum diagram. Hope this helps.
http://i45.photobucket.com/albums/f80/playaboyy02/Mobile%20Uploads/Screenshot_2014-12-28-13-22-43-1_zps9ac4e117.png (http://s45.photobucket.com/user/playaboyy02/media/Mobile%20Uploads/Screenshot_2014-12-28-13-22-43-1_zps9ac4e117.png.html)

[Zack]

Black on top, white on bottom.
Black line goes to the fitting under the throttle body thats cast into the upper manifold.
Everything else is self-explanatory based on how the vacuum lines are custom bent for exact fit.

[jnobles06]

sweet. thanks guys. i wasn't able to see the fitting under the throttle body and it got me really confused when trying to hook this stuff up. i knew i was missing something.

[jnobles06]

ok last question. this a/c line isn't in the vacuum diagram. it is a 1/4 barb, and the distro block is a 3/8. so im wondering if it even connects to the disto block or some where else that i'm not seeing? i think it connects to the distro block because its right next to it, but the difference in size it throwing me off. i don't remember removing any adapters or anything.

i if someone would snap a pic it would really help me out. thanks

http://i45.photobucket.com/albums/f80/playaboyy02/0101151547_zps9bc9670a.jpg (http://s45.photobucket.com/user/playaboyy02/media/0101151547_zps9bc9670a.jpg.htm l)

[justbob]

This should help.
http://tapatalk.imageshack.com/v2/15/01/01/3ec72c089d8dffad50ef19c0318599 98.jpg



Builder Of Badassery

[jnobles06]

THANK YOU!!!! :bows::banana:

so i guess you just ram that barb in there? weird.

[justbob]

? My car has been molested too many times. I honestly don't recall if that's the stock set up but it appears to be.


Builder Of Badassery

[jnobles06]

Well it does. It fits in there. Its just really snug. But it's the only free vacuum port and it the right length to connect to it. So if the shoe fits, as they say.....

[justbob]

So if the shoe fits, as they say.....


Buy a second one? :dunno:


Builder Of Badassery