Well it fit...yes?

[BeeDamn]

Hello guys I'm welling to buy a 20" so I want to know if this gonna fit or no?

I know the offset and width and some staff but I can't confirm it without you guys :)

SEE LINK PLEASE (http://www.ebay.com/itm/20-Staggered-Niche-Targa-Wheels-Anthracite-Finish-Fits-Audi-Mercedes-VW-/201267025394?pt=Motors_Car_Tru ck_Parts_Accessories&hash=item2edc7315f2&vxp=mtr)

Thank you

[Zack]

Bolt Pattern is wrong. you need 5 x 114.3

[BeeDamn]

It's 5*112 is this really effect or its not gonna fit?
Any thing I can do to make it fit?

[jwibbity]

It's 5*112 is this really effect or its not gonna fit?
Any thing I can do to make it fit?

Not really, the bolt pattern tells you the number and spacing between the wheels studs, if they dont match, you won't be able to get these wheels on the car..

[gdmjoe]

BeeDamn - It's 5*112 is this really effect or its not gonna fit?
You CAN'T be serious. http://www.gdmjoe.com/nonono.gif Rims have spec's that meet the requirements for fitment on the vehicle. In the case of a Marauder they're ... Bolt Pattern: 114.3mm x 5 | 4½" x 5
Offset: 45mm | 1¾"
Backspacing: 159mm | 6¼"
Center Bore: 70.3mm | 2¾" *IMPORTANT since the rims are hub centric and NOT lug centric.If the rim doesn't conform (and/or cannot be made to conform) to the spec's then it's a no-go.

Tools to aid in you next "Well it fit" ... TireRack.com » Search for Tires by Size (http://www.tirerack.com/tires/SearchTires.jsp) ««« -click- *Enter tire sizes, and review the Specs in the individual results. *Remember ... The sidewalls may be wider than the rims.
review Panther Platform Wheel & Tire Swaps - FAQ (http://www.crownvic.net/ubbthreads/ubbthreads.php?ubb=showflat&Number=1061930#Post1061930) ««« -click-
Tire Size Calculator (http://www.miata.net/garage/tirecalc.html) ««« -click- *Remember ... If you change the diameter you will need to do compensation measures for the speedometer. *e.g. a PCM flash[/size].
.
measure your wheel wells. i.e. frontspacing, backspacing, width, etc.
determine the rim spec's of the will-this-fit rim - MyBoltPattern (http://www.myboltpattern.com/) ««« -click-Do your homework. Nobody said it was going to be easy.


Any thing I can do to make it fit?
"Any thing" can be done with http://www.gdmjoe.com/bartm2.jpg
.

[BeeDamn]

Thank you guys for your helpful info

So please vist this LINK HERE (http://www.nicheroadwheels.com/specs.cfm?id=2250) and tell me what is the best 20" to go for it.

I think M126208565+35 for the front
And M126200065+40 for the rears

please tell me if these well fit so I can order them ASAP.

Thank you

[fastblackmerc]

Thank you guys for your helpful info

So please vist this LINK HERE (http://www.nicheroadwheels.com/specs.cfm?id=2250) and tell me what is the best 20" to go for it.

I think M126208565+35 for the front
And M126200065+40 for the rears

please tell me if these well fit so I can order them ASAP.

Thank you

Really?? We have to do all the work for you????

Checkout post #5 for the Marauder wheel specs then see if the wheels you want match those specs.

[BeeDamn]

I'm sorry I didn't said that you guys have to do it for me!! that's why I asked and said "please" because I got confused between the offset and the backspacing specs,

Anyway what really got me confused that some of you guys said the 35 offset is ok and it's fit !! some said go with +40 otherwise it well not fit !!

So excuse my weak understanding ! and I know that I asked to much.

Thank you

[gdmjoe]

BeeDamn - I'm sorry I didn't said that you guys have to do it for me!! that's why I asked and said "please" because I got confused between the offset and the backspacing specs,

Anyway what really got me confused that some of you guys said the 35 offset is ok and it's fit !! some said go with +40 otherwise it well not fit !!

So excuse my weak understanding ! and I know that I asked to much.

Thank you
Offset, moff-offset .... NONE of the rims in the list meet the centerbore spec'.
Fail!
http://www.gdmjoe.com/focus.jpg

There's more to rim fitment that 1 particular spec'. Do your homework (a.k.a. measurements and calculations).
http://www.gdmjoe.com/wheels/rimmeasurements.jpg

[lji372]

http://www.gdmjoe.com/focus.jpg

^^^^^^^^^ i love it

[MOTOWN]

Offset, moff-offset .... NONE of the rims in the list meet the centerbore spec'.
Fail!
http://www.gdmjoe.com/focus.jpg

There's more to rim fitment that 1 particular spec'. Do your homework (a.k.a. measurements and calculations).
http://www.gdmjoe.com/wheels/rimmeasurements.jpg

There is no point in being a complete AZZ towards someone who doesn't understand!

What your excuse?:bs:

[gdmjoe]

MOTOWN - There is no point in being a complete AZZ towards someone who doesn't understand!

What your excuse?
When it's been explained (by several), information and reference material has been provided, etc. I guess the the excuse is intolerance for sloth and laziness. http://www.gdmjoe.com/dunno.gif

What's your contribution?
.

[MOTOWN]

When it's been explained (by several), information and reference material has been provided, etc. I guess the the excuse is intolerance for sloth and laziness. http://www.gdmjoe.com/dunno.gif

What's your contribution?
.

Very simple , more help , advice , and knowledge than you will ever know! , maybe you should change your name to "wheel guy wanna be":stupid:

[gdmjoe]

MOTOWN - Very simple , more help , advice , and knowledge than you will ever know!
Blah, blah, blah, blah. Action talks. BS walks.

Pick the rim (which in this case there isn't a match) and nothing is learned. Read, go thru the effort, learn, and you'll seldom need to ask again.


maybe you should change your name to "wheel guy wanna be
Given that I've been adapting rims to FoMoCo vehicles way before you were born, there's never been a need for name change.
.

[MOTOWN]

Blah, blah, blah, blah. Action talks. BS walks.

Pick the rim (which in this case there isn't a match) and nothing is learned. Read, go thru the effort, learn, and you'll seldom need to ask again.


Given that I've been adapting rims to FoMoCo vehicles way before you were born, there's never been a need for name change.
.

When your PM box is full from questions let me know! until then have a Coke and a smile and STFU!:beer:

[BeeDamn]

I know that I did a mistake and miss information sorry for been a trouble-maker.

[MOTOWN]

I know that I did a mistake and miss information sorry for been a trouble-maker.

Your not a trouble maker at all just asking questions , we've all been there , if you need help with anything send me a PM and ill try and help if i can.

[bigcowl-imp]

Roger your my hero..

[massacre]

Is this CVN?
lmao

[1Marauder]

Your not a trouble maker at all just asking questions , we've all been there , if you need help with anything send me a PM and ill try and help if i can.

Awesome! Great Job!