procharger piping

[cer0413]

I'm looking to buy the piping for my p1sc build or can someone give me a piping list on the exact bends? Thank you in advance.

[Jeronimojc]

I'll be following Zack's footsteps. Will buy a CXRacing kit and go from there.


40847

What are you doing for power pipe and filter?


Sent from my iPhone using Tapatalk

[Zack]

I'm looking to buy the piping for my p1sc build or can someone give me a piping list on the exact bends? Thank you in advance.

Exact bends??? LMAO!!!
Its a hodgepodge of a zillion pipes and collars. Get the CXRacing Kit

[cer0413]

I'll be following Zack's footsteps. Will buy a CXRacing kit and go from there.


40847

What are you doing for power pipe and filter?


Sent from my iPhone using Tapatalk
Will do

Exact bends??? LMAO!!!
Its a hodgepodge of a zillion pipes and collars. Get the CXRacing Kit
Lol bet!

[cer0413]

I'll be following Zack's footsteps. Will buy a CXRacing kit and go from there.


40847

What are you doing for power pipe and filter?


Sent from my iPhone using Tapatalk
Power pipe? Are you referring to the piping from the head unit that holds the filter? As for a filter, I'm going with whatever filter the p1sc guys are running. I'm trying to keep it simple but efficient.

[Jeronimojc]

Power pipe? Are you referring to the piping from the head unit that holds the filter? As for a filter, I'm going with whatever filter the p1sc guys are running. I'm trying to keep it simple but efficient.


Here (http://www.mercurymarauder.net/forums/showpost.php?p=1429024&postcount=70) is what I am doing, except I won't be using the rubber reducing insert. Simple and efficient IMHO. I have the 90 degree elbow and the 30 degree pipe. I'll try to remember to snap a picture.

[cer0413]

Here (http://www.mercurymarauder.net/forums/showpost.php?p=1429024&postcount=70) is what I am doing, except I won't be using the rubber reducing insert. Simple and efficient IMHO. I have the 90 degree elbow and the 30 degree pipe. I'll try to remember to snap a picture.
Sounds simple to me.

[Jeronimojc]

Snapped a picture of the inlet pipe (http://www.mercurymarauder.net/forums/showpost.php?p=1429024&postcount=70)this morning.

https://s-media-cache-ak0.pinimg.com/originals/73/65/ff/7365ffde454cb975bf3394e425f5d0 7c.jpg

[Seneca]

Snapped a picture of the inlet pipe (http://www.mercurymarauder.net/forums/showpost.php?p=1429024&postcount=70)this morning.

https://s-media-cache-ak0.pinimg.com/originals/73/65/ff/7365ffde454cb975bf3394e425f5d0 7c.jpg

Looks good, curious are you making it blow thru?

[Jeronimojc]

Yes, blow thru.


Sent from my iPhone using Tapatalk

[Embassy]

Is LANDY still offering custom pipes?

[Jeronimojc]

Is LANDY still offering custom pipes?


Good question.


Sent from my iPhone using Tapatalk

[Zack]

Any piping that is a direct bolt-on is big $$$
$1000 IIRC from Landy. Not knocking that by any means, just a lot of coin.

[Jeronimojc]

I figured it would be expensive. Good to know. Thanks.


Sent from my iPhone using Tapatalk

[justbob]

Any piping that is a direct bolt-on is big $$$
$1000 IIRC from Landy. Not knocking that by any means, just a lot of coin.


$1,200 I was told. But he probably likes you more. :)

Good price for the hardest part for most peeps.


Builder Of Badassery

[cer0413]

Any piping that is a direct bolt-on is big $$$
$1000 IIRC from Landy. Not knocking that by any means, just a lot of coin.
Deeeeeeeeeeng!!!!!!

[Blackmobile]

Wouldn't a layout of the Procharger kit help in this regard?

[1stMerc]

^^^ he has the layout. Trick is finding a main piping kit closest to the bends needed.

[justbob]

No trick. It's just a bunch of bends and a crapload of rubber couplings. One night kind of stuffs. Try welding it all! :)


Builder Of Badassery

[cer0413]

Wouldn't a layout of the Procharger kit help in this regard?
I wouldn't mind having a layout for a blue print.

[cer0413]

^^^ he has the layout. Trick is finding a main piping kit closest to the bends needed.
Hence zack's word, "hodgepodge". I learn something new everyday on here.
:)

No trick. It's just a bunch of bends and a crapload of rubber couplings. One night kind of stuffs. Try welding it all! :)


Builder Of Badassery
Welding is the mission. Especially this thingy..... http://tapatalk.imageshack.com/v2/15/01/29/75d07f669d7b5df23e98a8137344e5 9d.jpg

[Zack]

I built the entire piping kit for the turbo car in 2 hours. There is no need to weld anything. Hell, I JB Welded the MAF flange to the pipe!

[Embassy]

See the pics in these threads:

http://mercurymarauder.net/forums/showthread.php?t=41799

http://www.mercurymarauder.net/forums/showthread.php?t=28151

[cer0413]

See the pics in these threads:

http://mercurymarauder.net/forums/showthread.php?t=41799

http://www.mercurymarauder.net/forums/showthread.php?t=28151
Not attracted to you at all but I officially love you for this. I'm most definitely going to buy the cx racing piping kit suggested earlier and play match maker with that first thread. Thank you all!

[marauder21]

Not attracted to you at all but I officially love you for this. I'm most definitely going to buy the cx racing piping kit suggested earlier and play match maker with that first thread. Thank you all!

Dam. I see you're ahead of me lmao

[cer0413]

Dam. I see you're ahead of me lmao
I'm actually behind bro

[marauder21]

I'm actually behind bro

You gay
Lol and i haven't bought anything

[martyo]

Bring the car to me. We will weld it up for you and then powder coat it all nice and pretty like.

[cer0413]

Bring the car to me. We will weld it up for you and then powder coat it all nice and pretty like.
How about I send the pipes and you do all of the necessary weld or bends and then p-coat them? [emoji214]

[martyo]

How about I send the pipes and you do all of the necessary weld or bends and then p-coat them? [emoji214]

I need a car to do the fitment.

[lji372]

I need a car to do the fitment.

one doesn't fit all?? :lol:

[Blackmobile]

Pretty much the entire Procharge kit laid out.



I wouldn't mind having a layout for a blue print.

[cer0413]

one doesn't fit all?? :lol:
That's what she said.......

[cer0413]

Pretty much the entire Procharge kit laid out.
Nice!!!!!!!!

[1stMerc]

Hmmm, Did I send you the manual? It has the layout of the piping.

[cer0413]

Pretty much the entire Procharge kit laid out.
Nice!!!!!!!!

Hmmm, Did I send you the manual? It has the layout of the piping.
Yes but that was for the f.I.t. piping. I have to fab my own since they're not in business anymore.

[1stMerc]

Yeah, if done right you won't need all the piping shown in either of the pics.

[cer0413]

Yeah, if done right you won't need all the piping shown in either of the pics.
That picture has plenty of pipes, rubbers, and collars. Don't think I need all of that. No offense to this individual but I don't wanna look like this.......

[justbob]

What the hell is that???? That's funny!!


Builder Of Badassery

[cer0413]

What the hell is that???? That's funny!!


Builder Of Badassery
Faster than mines.

[1stMerc]

That picture has plenty of pipes, rubbers, and collars. Don't think I need all of that. No offense to this individual but I don't wanna look like this.......

Yep, definately didn't want that when i did mine.

[justbob]

Looking at this pic I will admit I'm jealous however. Not of what's in the "kit", but the fact that it is all NEW. In my 41 years on this great planet I have rarely had the opportunity to have new things.

Sob story yes, but true. Seems like if I had the money, the items weren't 100% to my needs/wants, it still had to be modified, or quite simply nobody makes it. But normally it's simply can't afford it, so I am forced into creating my own and going the trial/error, countless hours of R&D, looking brilliant or worse, plain dumb, plus the bloody knuckles...

Sure taking pride in your own creation reaps its awards (when things go good) but after so many of those it starts to feel more like an excuse. LOL

End of sob story, now go ***!

I'm impressed with you CJ. You set your mind on something and you are hell bent on getting what you want. Too many people around would rather sit around and talk talk talk! It's sooooo refreshing to see a "do'er"! And your also cool as **** and my homie. :)
http://tapatalk.imageshack.com/v2/15/01/31/27a4fd4ca5cf0cc94199cf45a9ca00 43.jpg


Builder Of Badassery

[cer0413]

Looking at this pic I will admit I'm jealous however. Not of what's in the "kit", but the fact that it is all NEW. In my 41 years on this great planet I have rarely had the opportunity to have new things.

Sob story yes, but true. Seems like if I had the money, the items weren't 100% to my needs/wants, it still had to be modified, or quite simply nobody makes it. But normally it's simply can't afford it, so I am forced into creating my own and going the trial/error, countless hours of R&D, looking brilliant or worse, plain dumb, plus the bloody knuckles...

Sure taking pride in your own creation reaps its awards (when things go good) but after so many of those it starts to feel more like an excuse. LOL

End of sob story, now go ***!

I'm impressed with you CJ. You set your mind on something and you are hell bent on getting what you want. Too many people around would rather sit around and talk talk talk! It's sooooo refreshing to see a "do'er"! And your also cool as **** and my homie. :)
http://tapatalk.imageshack.com/v2/15/01/31/27a4fd4ca5cf0cc94199cf45a9ca00 43.jpg


Builder Of Badassery
[emoji22] I appreciate the nice words JB. I appreciate all of you. To be honest, all I had was a dream of being in a position to finally get this stuff. This past Mville pretty much gave me the go to pull the trigger. Attending zacks party, volo museum (everybody smoking me), YouTubing s/c Marauders, and tbone scaring the **** out of me with his Eaton experience. When I'm done with this, there will be a thank you thread in dedication to all the guys who assisted me or put up with my never ending q's.

[lji372]

Mine is getting redone.

See what happens when you buy one done.

It gets redone :banana2:

[Jeronimojc]

...but normally it's simply can't afford it, so I am forced into creating my own and going the trial/error, countless hours of R&D, looking brilliant or worse, plain dumb, plus the bloody...




More fun this way. Think how boring it would be to have enough money to have someone else do the work, or to buy a kit where everything fits and you don't get to exercise your creativity. Finding good deals and making things work is very rewarding. You learn a bunch more your way.



Sent from my iPhone using Tapatalk

[marauder21]

Im waiting for my funds to come in lol then saving up a little more then BOOM. Procharing hunting Cj lol ill be there

Sent from my SGH-M919 using Tapatalk

[8UWITH6]

You know Steve has a Procharged car.................. ;)

[cer0413]

You know Steve has a Procharged car.................. ;)
yes I do and he's been plenty of help.

[cer0413]

http://images.tapatalk-cdn.com/15/06/10/56584c5f50c6060ae5ee1dbe8b48e1 c0.jpg
This should work.

[Embassy]

True car guy.

Sleeps on box spring and mattress w/no sheets on the floor to fund supercharger.

[Zack]

True car guy.

Sleeps on box spring and mattress w/no sheets on the floor to fund Hollister threads.

FIXED IT for ya

[Embassy]

Touché.....

[cer0413]

True car guy.

Sleeps on box spring and mattress w/no sheets on the floor to fund supercharger.
I have an Ikea bed. This is the guest room bed, lol.

[cer0413]

FIXED IT for ya
Dude, I told you Hollister is cheap. [emoji23] [emoji23] [emoji23] [emoji23]

[Embassy]

Less selfies on FB and more progress on the BOOST.

[cer0413]

Less selfies on FB and more progress on the BOOST.
Waiting on an installer, that is unless you want to install it. [emoji16]

[Embassy]

No but I can recommend one... in Kentucky.

[1stMerc]

Waiting on an installer, that is unless you want to install it. [emoji16]

????? Waiting on an installer ????

Look in the mirror, pick a weekend and get started. :D

[cer0413]

????? Waiting on an installer ????

Look in the mirror, pick a weekend and get started. :D
Lol I would rather let a professional do it but thanks for your kind words of encouragement.

[lji372]

Lol I would rather let a professional do it but thanks for your kind words of encouragement.

Come on up!

[cer0413]

Come on up!
When are you free?