Getting ready for the tracks to open

[m.gaddis04]

Car is tuned up and ready for some track times thanks to Jeff. Done a few mods and have the 15x10 racestars ready to go.

http://i62.photobucket.com/albums/h85/rtusnake/D2738D92-2DBA-46C1-AFE7-8EEF711F0E70-22011-0000103BD17414A2_zps0a88ec7c.j pg (http://s62.photobucket.com/user/rtusnake/media/D2738D92-2DBA-46C1-AFE7-8EEF711F0E70-22011-0000103BD17414A2_zps0a88ec7c.j pg.html)
http://i62.photobucket.com/albums/h85/rtusnake/37EDF705-D93C-486E-901B-4BA0C9171CF9-22011-0000103BDA0E42B3_zpsa3ba7cc6.j pg (http://s62.photobucket.com/user/rtusnake/media/37EDF705-D93C-486E-901B-4BA0C9171CF9-22011-0000103BDA0E42B3_zpsa3ba7cc6.j pg.html)
http://i62.photobucket.com/albums/h85/rtusnake/C27A2853-28DF-48C9-B190-979895A8DC04-22011-0000103BE0334489_zps945178c5.j pg (http://s62.photobucket.com/user/rtusnake/media/C27A2853-28DF-48C9-B190-979895A8DC04-22011-0000103BE0334489_zps945178c5.j pg.html)

[Zack]

1st Marauder I've seen with dumps.
What are your mods?

[Zack]

Also, ever driven a 4500lb brick with slicks?
It's scary.
If you dont have the appropriate front tire, you have a good chance of kissing something concrete, as many members have discovered.

[m.gaddis04]

Also, ever driven a 4500lb brick with slicks?
It's scary.
If you dont have the appropriate front tire, you have a good chance of kissing something concrete, as many members have discovered.

It's a 03 cobra pullout without a ported eaton and 100 shot. I have a set of front runners if it doesn't run straight with the factory fronts

[Zack]

Post pics!!!

[BigM460]

Also, ever driven a 4500lb brick with slicks?
It's scary.
If you dont have the appropriate front tire, you have a good chance of kissing something concrete, as many members have discovered.

Big cars with slicks do get a bit of a swagger on the big end! Drag radials are a lot more comfortable.

[sailsmen]

Big cars with slicks do get a bit of a swagger on the big end! Drag radials are a lot more comfortable.

I was aborting too many runs with the Cheater Slicks so I switched to DR, just a little bit slower, and have not aborted a run since.

[m.gaddis04]

Post pics!!!

http://i62.photobucket.com/albums/h85/rtusnake/48D0AFAB-AB0B-4DD3-AD69-91FD98A0025A-23180-000011012796A4D2_zps95a0a78d.j pg

[Big Mercur]

What are you hoping to run??

[m.gaddis04]

Low 12s, maybe high 11

[Zack]

A ported eaton car with a 100 shot will go low 11's all day long with driver mod.

[m.gaddis04]

Just doing blower only runs this time around. Wanna build the rear before spraying it

[RacerX]

Is that a 3.0 upper? What's your lower pulley size?


Just doing blower only runs this time around. Wanna build the rear before spraying it

Just hit it in second. ;)

[m.gaddis04]

Lol thought about spraying once it's moving. 2.8 upper 4lb lower

[RacerX]

Lol thought about spraying once it's moving. 2.8 upper 4lb lower

11.7 @ 116 ish without the N2O of course.

[blkZooM]

Any major work needed to fit 15 on the rear?

[Marauderjack]

A ported eaton car with a 100 shot will go low 11's all day long with driver mod.

Funny boy!!!:rofl:

[merc]

It's a 03 cobra pullout without a ported eaton and 100 shot. I have a set of front runners if it doesn't run straight with the factory fronts

Whatcha talkin bout Willis :burnout:

Currently racing Hoosier DOT Radial P295/50R16

[m.gaddis04]

Any major work needed to fit 15 on the rear?

Made a smaller lower shock bracket. Not to bad

[Zack]

Funny boy!!!:rofl:

Care to bet?

[Marauderjack]

"Driver Mod"!!:rofl:

[CameronVic]

A ported eaton car with a 100 shot will go low 11's all day long with driver mod.Driver mod? It's an automatic.