Cobra Eaton Install

[mm svt]

The Eaton cobra installation went well and our visit to Mo's went even better,( the drive to Georgia from Indiana was a challenge due to a snow system and Highway closeings). We Trailered the car to Mo's and was able to drive it all the way back to our garage the roads were dry all the way, it was as clean as it was on the Dyno.
Thanks Jeff
Thanks Marty

you have a great customer base and staff

[loud2004marquis]

Congrats! What pulley combo did you go with?

[martyo]

The Eaton cobra installation went well and our visit to Mo's went even better,( the drive to Georgia from Indiana was a challenge due to a snow system and Highway closeings). We Trailered the car to Mo's and was able to drive it all the way back to our garage the roads were dry all the way, it was as clean as it was on the Dyno.
Thanks Jeff
Thanks Marty

you have a great customer base and staff

It was good seeing you guys and I am glad you liked what we did for you.

Just holler if you need anything else!

[mm svt]

Well we ended up with the stock cobra pulley set up, we thought we purchased a stock set up but the eaton was ported and evidently had a 17lb pulley on it, Jeff was very alert and stopped the first pull when it hit 390hp @ 3000 or 4000 rpm. We had 365tq and 371hp with belt slippage on the very top end, Jeff said we would be at 380 once we get that fixed.

The car feels great and Jeff said it was perfect which is an awesome feeling to get that kind of feedback on your work.

Thanks Again Marty

This forum provided some very useful information and we appreciate it.

[BeeDamn]

Congrats Man I hope to get mine done too.
I hope to see video doing WOT I like eaton videos good luck man.

[chief455]

Well we ended up with the stock cobra pulley set up, we thought we purchased a stock set up but the eaton was ported and evidently had a 17lb pulley on it, Jeff was very alert and stopped the first pull when it hit 390hp @ 3000 or 4000 rpm. We had 365tq and 371hp with belt slippage on the very top end, Jeff said we would be at 380 once we get that fixed.

The car feels great and Jeff said it was perfect which is an awesome feeling to get that kind of feedback on your work.

Thanks Again Marty

This forum provided some very useful information and we appreciate it.
I got very similar numbers from them after my swap, I have SW headers, you will LOVE driving your car now, congrats!

[mm svt]

This is my sons car and his account but I had to say thanks to Marty too, I took a video of the tailpipe during the test

Having the hardest time trying to get video from phone to forum

[justbob]

This is my sons car and his account but I had to say thanks to Marty too, I took a video of the tailpipe during the test

Having the hardest time trying to get video from phone to forum


Tapatalk app makes forums wayyy easier to do such tasks.


Builder Of Badassery

[mm svt]

hope this works
https://vimeo.com/121207509?from=outro-local

still don't have the exhaulst video with sound yet