My Watts Links

[Bob Mathis]

:banana::)Here is my boxed watts links. They turned out great.

[martyo]

Bob you are going to need another car to keep you busy in your retirement.

Tell Jean I said so!

[Bob Mathis]

I am sure that she is not going to let that happen. I have question can you all due a newer turn on my car with the chip that is in it?

[martyo]

I am sure that she is not going to let that happen. I have question can you all due a newer turn on my car with the chip that is in it?

Yep.

.................

[Bob Mathis]

Here are the watts links painted and ready to install. Have to put the ride height bracket on.

[martyo]

Looks great Bob!

[Bob Mathis]

:banana::)Watts Link done and installed.

[clmrt]

Clean car! Did you properly torque it to 11,000,000 ft/lbs?

[justbob]

Looks awesome!


Builder Of Badassery

[Bob Mathis]

I have to put some lock tight on the big nut and do a torque on everything.

[O's Fan Rich]

I like it!

[burt ragio]

Does it now handle as good as it looks ?

[Bob Mathis]

Have not drove it yet. I dive it with just the lowers and I could feel some difference. I am putting a new Ford Fined Cover on the rear end. I will drive it tomorrow if the weather is good.

[fastblackmerc]

I have to put some lock tight on the big nut and do a torque on everything.

Looks good!

Torque is 199 pounds feet.

[Bob Mathis]

Thanks for that I will have to bring big torque from home. I know some where I seen the torque on all the bolts like the control arms. But if you have that too it would help.

[fastblackmerc]

Thanks for that I will have to bring big torque from home. I know some where I seen the torque on all the bolts like the control arms. But if you have that too it would help.

I'll look it up.

[Mebot]

If I recall it was 69 or 70 ft lbs for one of the arms and 110 ft lbs for the other but I can't remember which number applies to the upper and which applies to the lower

[Thenwhat85]

Looks better than mine. I wasted time cutting the hump out when I should of just add metal to the ends. For some reason I can't upload the pictures.

[Mebot]

I can see your picture, but I'm browsing my phone via tapatalk

[Bob Mathis]

Thanks all. It has been fun and some work. I have about 80 dollars and 8hrs of welding and fitting. Hope it handles will.

[O's Fan Rich]

I have spare control arms and watts linkage, and a Miller Mig.... you have inspired me!

[Bob Mathis]

Go for it. I enjoyed doing mine.