Hood heat material...

[Matt34]

Would someone mind posting a pic of the underside of their hood so i can see what it is suppose to look like with the insulation on it???

And how are you suppose to attach it, spray glue?

[Zack]

Come on man. Really?

[tbone]

They attach with plastic push pins roughly 2" in diameter found at any auto store or Ace hardware for 55 cents each. Maybe a $5 investment.

[kirk]

Would someone mind posting a pic of the underside of their hood so i can see what it is suppose to look like with the insulation on it???

And how are you suppose to attach it, spray glue?

Check the next to the last two pics here http://homepages.wmich.edu/~dillery/3Z68G516447.html

I used spray glue. You can still get these, but they may come with the two small pieces that you see missing in the photos. Throw those two pieces in the trash.


They attach with plastic push pins roughly 2" in diameter found at any auto store or Ace hardware for 55 cents each. Maybe a $5 investment.

No buttons on a "63.

[tbone]

He didn't ask about a 63.

[ctrlraven]

He didn't ask about a 63.
OP is posting in "The Classic Lounge Home of the 63-65, 69-70 Classic Marauders" section so most likely it's a classic question.

[Marauderjack]

I have made this mistake also.....assuming it's an '03-'04 question!!:shake:

I have since learned to look at the "Forum Title" before replying!!:D

[kirk]

I have made this mistake also.....assuming it's an '03-'04 question!!:shake:

I have since learned to look at the "Forum Title" before replying!!:D

It's an easy mistake to make since 99% of what happens here is related to '03-4 cars.

[Matt34]

Check the next to the last two pics here http://homepages.wmich.edu/~dillery/3Z68G516447.html

I used spray glue. You can still get these, but they may come with the two small pieces that you see missing in the photos. Throw those two pieces in the trash.



No buttons on a "63.

I bought what looks like the same material but it came in one big piece so I'm gonna have to cut it myself, I figured it went all the way to the edge of each triangle shaped indention but wasn't sure.

So you're saying dont put any in the two smaller front spaces?

What about the trunk lid, if I had enough material left over should I do that also or would that look stupid?

As always thanks kirk.

[tbone]

OP is posting in "The Classic Lounge Home of the 63-65, 69-70 Classic Marauders" section so most likely it's a classic question.

I forgot to look up :rolleyes:.

But he still never asked about a '63.

[kirk]

I bought what looks like the same material but it came in one big piece so I'm gonna have to cut it myself, I figured it went all the way to the edge of each triangle shaped indention but wasn't sure.

So you're saying dont put any in the two smaller front spaces?

What about the trunk lid, if I had enough material left over should I do that also or would that look stupid?

As always thanks kirk.

Two smaller spaces were not done from the factory (doesn't mean you can't do it).

I think doing the trunk would look stupid, but that's just my 2 cents.